<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><font style="" face="Tahoma">Pete,<br><br> To turn off the connect/disconnect messages except yours put these commandsin your node parameters in rpt.conf -<br></font><br id="FontBreak"><font style="" face="Tahoma">holdofftelem=1<br>telemdefault=2<br><br>Check to see if either are already there or set differently.<br><br>You also have full control over courtesy tones and timers in rpt.conf. Look for the linkunkeyct= , unlinkedct=, and hangtime= for linked and unlinked courtesy tones and TX hangtime. Don't be afraid to experiment. Just save the old setting as a comment. You will have to do a 'rpt reload' in the client or restart asterisk to see the results of any changes.<br></font><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">http://www.crompton.com/hamradio</font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="stopSpelling">From: petem001@hotmail.com<br>To: app_rpt-users@ohnosec.org<br>Date: Thu, 29 May 2014 12:59:35 -0400<br>Subject: [App_rpt-users] Simplex link to a DR-1<br><br>
<div dir="ltr">
<div style="FONT-SIZE:12pt;FONT-FAMILY:'Calibri';COLOR:#000000;">
<div>Hi guys. </div>
<div> </div>
<div>Got part of the Yaesu beta testing of there fusion system repeater.</div>
<div> </div>
<div>So I took there repeater and unconnected my old MSR-2000. </div>
<div> </div>
<div>The linking to the DR-1 seem a bit problematic, especialy if used in both
digital and analog mode (auto switch).</div>
<div> </div>
<div>So I was thinking of using a small IC-F121S locally on a dummy load at the
repeater site to act as the link on the analog side of the repeater, the
IC-F121S will handle all the ctcss encoding/decoding. </div>
<div> </div>
<div>My problem is how should I program my node so that I wont have a tail nor
any courtesy tone. But I want voice ID to work. </div>
<div>I know that there are 2 duplex setting. one in the rpt.conf file the other
is in usbradio.conf. Anyone can help me figure out what i need to do?</div>
<div> </div>
<div>one other thing, how can I stopp any message from connect/disconnect to my
node aside the one initiated from my node. (already did it on the echolink
side.) but want to do it on the allstar side.)</div>
<div> </div>
<div>Thanks for the help.. </div>
<div> </div>
<div>Pierre</div>
<div>VE2PF</div>
<div> </div>
<div> </div>
<div> </div></div></div>
<br>_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.</div> </div></body>
</html>