<HTML><HEAD></HEAD>
<BODY dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000">
<DIV>Hi guys. </DIV>
<DIV> </DIV>
<DIV>Got part of the Yaesu beta testing of there fusion system repeater.</DIV>
<DIV> </DIV>
<DIV>So I took there repeater and unconnected my old MSR-2000. </DIV>
<DIV> </DIV>
<DIV>The linking to the DR-1 seem a bit problematic, especialy if used in both
digital and analog mode (auto switch).</DIV>
<DIV> </DIV>
<DIV>So I was thinking of using a small IC-F121S locally on a dummy load at the
repeater site to act as the link on the analog side of the repeater, the
IC-F121S will handle all the ctcss encoding/decoding. </DIV>
<DIV> </DIV>
<DIV>My problem is how should I program my node so that I wont have a tail nor
any courtesy tone. But I want voice ID to work. </DIV>
<DIV>I know that there are 2 duplex setting. one in the rpt.conf file the other
is in usbradio.conf. Anyone can help me figure out what i need to do?</DIV>
<DIV> </DIV>
<DIV>one other thing, how can I stopp any message from connect/disconnect to my
node aside the one initiated from my node. (already did it on the echolink
side.) but want to do it on the allstar side.)</DIV>
<DIV> </DIV>
<DIV>Thanks for the help.. </DIV>
<DIV> </DIV>
<DIV>Pierre</DIV>
<DIV>VE2PF</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV></DIV></DIV></BODY></HTML>