<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Aloha,<br>
Hey Ramon,<br>
Maybe you could post a link or something to let us know where you
got the heatsink. I'm using the steel cases at Logic Supply for my
BBB as I will be putting my BBB's in some spots with a lot of high
voltage switch gear so I was wondering if there would be any
clearance problems. I'm in Hawaii and sometimes it can get a little
warm and was wondering about the heat of the processor myself. <br>
Jim NH6HI<br>
<br>
<br>
<blockquote cite="mid:BLU172-W411131C7326158D7B19C41BAF50@phx.gbl"
type="cite">
<div dir="ltr">
<div>
<hr id="stopSpelling">Date: Fri, 18 Jul 2014 00:19:03 -0400<br>
From: <a class="moz-txt-link-abbreviated" href="mailto:kp4tr.ramon@gmail.com">kp4tr.ramon@gmail.com</a><br>
To: <a class="moz-txt-link-abbreviated" href="mailto:doug@crompton.com">doug@crompton.com</a>; <a class="moz-txt-link-abbreviated" href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
Subject: Re: [App_rpt-users] BeagleBone Black Allstar Official
Release<br>
<br>
<div class="ecxmoz-cite-prefix">Doug,<br>
<br>
Just wanted to congratulate you on your efforts in porting
Allstar to the BeagleBone Black. I just got my BBB board
today and have a node up and running with no issues. Took me
about 3 hours to set up, but mostly because I realized the
BBB uses a microSD card, which I didn't have one on hand. I
had to go to Walmart and get one because it is close and
open at 9:30PM.<br>
<br>
I am using the simpleusb.conf, which I have never used, but
works fine.<br>
<br>
The TI chip does get a bit hot, so I put a heat sink on it
to help.<br>
<br>
</div>
</div>
</div>
<br>
</blockquote>
<br>
</body>
</html>