<html><body><span style="font-family:Verdana; color:#000000; font-size:10pt;"><div><br></div><div>If I understand you correctly,</div><div><br></div><div>What you need to do is allow the repeater to pass pl tonesfrom rx to the repeater tx only when active COS then put your V7 in CTCSS for that tone.</div><div><br></div><div>Use in your rpt.conf</div><div><br></div><div> duplex=0<br>linktolink=yes<br></div><div><br></div><div><br></div><div>...mike/kb8jnm<br></div><div><br> <div id="wmQuoteWrapper"> -------- Original Message --------<br> Subject: [App_rpt-users] ctss active<br> From: ea8ee <<a target="_blank" href="mailto:ea8ee1@gmail.com">ea8ee1@gmail.com</a>><br> Date: Sun, July 27, 2014 1:28 pm<br> To: app_rpt mailing list <<a target="_blank" href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a>><br> <br> Hello fellow'<div> </div><div>Im using my kenwood v7 node allstar team with a uri dmk we have connected to a repeater that has tail and own id beacons the repeater works with ctss 88.5 and I would like the tail and the beacons are not heard on the Internet if the repeater user has activated the CTSS 88.5 however the rig has activated the ctss rx and tx but the allstar node is listening to the tail looks as if through the uri dmk not detects ctss that the rig detect well if there is any way to change that option in the config? <span></span></div> <div><br></div><br><br>-- <br>Enviado desde EA8EE red movil<br> <hr>_______________________________________________<br> App_rpt-users mailing list<br> <a target="_blank" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br> <a target="_blank" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br> <br> To unsubscribe from this list please visit <a target="_blank" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </div> </div></span></body></html>