<HTML>
<HEAD>
<TITLE>Re: [App_rpt-users] Incoming connects</TITLE>
</HEAD>
<BODY>
<FONT FACE="Arial"><SPAN STYLE='font-size:12pt'>Wade.<BR>
<BR>
Two things:<BR>
<BR>
<BR>
</SPAN></FONT><OL><LI><FONT FACE="Arial"><SPAN STYLE='font-size:12pt'>Can you send along the contents of the /etc/sysconfig/networking/devices/ifcfg-eth0 and send along the data returned when you execute “ifconfig –a”
</SPAN></FONT><LI><FONT FACE="Arial"><SPAN STYLE='font-size:12pt'>Can you send along the port forwarding rules for your router (not what you copy down, but rather the screen capture or if command line – cut & paste. Also what is the model number of the router – some do not properly port forward UDP 4569 – for example some Linksys models.<BR>
</SPAN></FONT></OL><FONT FACE="Arial"><SPAN STYLE='font-size:12pt'><BR>
If you are willing to experiment do the following at a cli – tcpdump port 4569 and send along a copy of the data capture.<BR>
<BR>
Keith<BR>
VA3YC<BR>
<BR>
<BR>
On 9/13/14 9:12 AM, "Loren Tedford" <<a href="lorentedford@gmail.com">lorentedford@gmail.com</a>> wrote:<BR>
<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Arial"><SPAN STYLE='font-size:12pt'>I was thinking that Maybe the Allstar port has not been forwarded Correctly.. Can you access your node via the Web Trancsiever and Echolink? If its an Echolink issue it would involve crazy port forwarding of 4 ports which.. I already forgot what they were bu you can find it via google.. I think the default port for allstar was like 4569 another helpful hint i have learned from experience is to set the node up using a Static Ip rather than automatic because it it set to Automatic it could change on ya then you would have to report forward the ports to that new ip.. Another thing you could do since most Routersif today allow you to assign Ips via Mac Adress is to set it Static from the Router there is a few good reasons to do this one is that if some thing lets say was to happen and you had to fall back on a backup internet connection our router system your node provided that you have DynDNS setup on the node can relay the new ip info and some times if your lucky might actually be able to get into the node remotely with out having to go out to the repeater sight or node sight..<BR>
<BR>
Not sure on your level of Knowledge with Linux but might go directly out to the node and type in ( ifconfig ) Another thought is internally your node has decided to run IPv6 more and more in the Server situations I have seen IPv6 than ever before never would have dreamed of the day that I would be using both Ipv4 and Ipv6 just a thought.. <BR>
<BR>
</SPAN><FONT SIZE="2"><SPAN STYLE='font-size:10pt'>Loren Tedford (KC9ZHV) <BR>
Email: <a href="lorentedford@gmail.com">lorentedford@gmail.com</a><BR>
Phone: 618-553-0806<BR>
<a href="http://www.lorentedford.com">http://www.lorentedford.com</a> <<a href="http://www.lorentedford.com/">http://www.lorentedford.com/</a>> <BR>
<a href="http://kc9zhv.lorentedford.com">http://kc9zhv.lorentedford.com</a> <<a href="http://kc9zhv.lorentedford.com/">http://kc9zhv.lorentedford.com/</a>> <BR>
</SPAN></FONT><SPAN STYLE='font-size:12pt'><BR>
<BR>
On Sat, Sep 13, 2014 at 6:43 AM, REDBUTTON_CTRL <<a href="jrorke@cogeco.ca">jrorke@cogeco.ca</a>> wrote:<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Arial"><SPAN STYLE='font-size:12pt'>Is you box on a static IP or DHCP?<BR>
<BR>
The default install puts the box on dhcp. After you load the sw then set the box to a static ip. If the bnox is on dhcp you will beable to connect out but inward forwarding doesnt work because the box is not on the ip configured in the router.<BR>
<BR>
I see you node is reporting. Can you ssh into the box from another pc?<BR>
<BR>
Jon VA3RQ<BR>
<BR>
<BR>
On 9/13/2014 2:45 AM, wade wrote:<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Arial"><SPAN STYLE='font-size:12pt'>Good evening all,<BR>
<BR>
I have been dealing with an issue for about a month now of nobody being able to connect to me, either from AllStar or Echolink. I can connect to them by radio or using the CLI and it works perfect. Audio is passed back and forth no drops, nothing. But no one can connect in. About 2 weeks ago I was forced to do a complete system reinstall due to a bad streaming install attempt. I thought maybe that would fix my incoming issue also. It did not. I can ping Google and everything is great, no packets dropped. During the course of this investigation I have gone through my router numerous times and the port forwarding is correct, UDP 4569 for AllStar, UDP 5198-5199 and TCP 5200 for Echolink. This setup has worked flawlessly for months after I set it up in it new location then it just quit.<BR>
<BR>
Any ideas that maybe I haven't thought of or maybe something to jar my memory?<BR>
<BR>
<BR>
<BR>
I also have had this message coming across the CLI constantly.<BR>
<BR>
"Warning aprsthread: server noam.aprs2.net <<a href="http://noam.aprs2.net">http://noam.aprs2.net</a>> cannot be found"<BR>
<BR>
That was a short description as I can not copy and paste it to the computer I use to email from.<BR>
<BR>
I have tried "rotate.aprs.net <<a href="http://rotate.aprs.net">http://rotate.aprs.net</a>> " and "rotate.aprs2.net <<a href="http://rotate.aprs2.net">http://rotate.aprs2.net</a>> " also with no success.<BR>
Could the two issues be related at all?<BR>
<BR>
I would appreciate any help that can be given. I think it is something so basic I am just over looking it and I hope it is. But I wanted to run it past the experts to see if you guys had any other ideas<BR>
<BR>
Thanks<BR>
Wade<BR>
KCØMLT<BR>
Node 28757<BR>
<BR>
---<BR>
This email is free from viruses and malware because avast! Antivirus protection is active.<BR>
<a href="http://www.avast.com">http://www.avast.com</a><BR>
<BR>
_______________________________________________<BR>
App_rpt-users mailing list<BR>
<a href="App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><BR>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> <<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>> <BR>
<BR>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> <<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<BR>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.<BR>
</SPAN></FONT></BLOCKQUOTE><FONT FACE="Arial"><SPAN STYLE='font-size:12pt'>_______________________________________________<BR>
App_rpt-users mailing list<BR>
<a href="App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><BR>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> <<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>> <BR>
<BR>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> <<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<BR>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <BR>
</SPAN></FONT></BLOCKQUOTE><FONT FACE="Arial"><SPAN STYLE='font-size:12pt'><BR>
<BR>
<HR ALIGN=CENTER SIZE="3" WIDTH="95%"></SPAN></FONT><FONT SIZE="2"><FONT FACE="Consolas, Courier New, Courier"><SPAN STYLE='font-size:10pt'>_______________________________________________<BR>
App_rpt-users mailing list<BR>
<a href="App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><BR>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><BR>
<BR>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<BR>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <BR>
</SPAN></FONT></FONT></BLOCKQUOTE><FONT SIZE="2"><FONT FACE="Consolas, Courier New, Courier"><SPAN STYLE='font-size:10pt'><BR>
</SPAN></FONT></FONT><FONT FACE="Arial"><SPAN STYLE='font-size:12pt'>-- <BR>
<a href="keith@goobie.org">keith@goobie.org</a><BR>
Keith Goobie<BR>
Richmond Hill, ON, CANADA<BR>
</SPAN></FONT>
</BODY>
</HTML>