<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>That sort of a thing was never implemented because of the open-interoperability<br>nature of Allstar. That would prevent any user from going to any Allstar-linked<br>system and be able to use it, which is one of the fundamental premises of Allstar.<br><br>"Logins" are implemented to remote-base use, but not for general repeater<br>use.<br><br>Jim WB6NIL<br><br><div>> Date: Sun, 21 Sep 2014 14:57:04 -0400<br>> From: Bryan@bryanfields.net<br>> To: app_rpt-users@ohnosec.org<br>> Subject: [App_rpt-users] user login prior to control codes?<br>> <br>> As we've had some issues with people sending control codes into the system<br>> here and linking/unlinking major hubs I'm trying to figure out a better way<br>> than just prefixing the functions in rpt.conf with a code prefix (ie *3<br>> becomes *443).<br>> <br>> Is there a way we can do this on a per user basis? Perhaps setting up a users<br>> file with a "PIN" and then requiring a user to "login" with this PIN prior to<br>> accepting any control codes?<br>> <br>> My ideal setup would be have one rpt_users.conf file (which should be<br>> changeable with out having to reload asterisk)<br>> <br>> [users]<br>> <br>> KB9MCI 12345<br>> KQ4ERT 43567<br>> KB8RET 54321<br>> <br>> Then the users would key in #PIN, the system would auth them against the file,<br>> and upon authing them, it would respond "CALLSIGN authorized", the courtesy<br>> tone would change and the user would have 60 seconds to input the control codes.<br>> <br>> On the other hand I'd be happy with a way to do this on a per user basis for<br>> each command. For Example, *3 for kb9mci would become #12345*3.<br>> <br>> Anyone have ideas on how to script this sort of a setup?<br>> <br>> 73's<br>> -- <br>> Bryan Fields<br>> <br>> 727-409-1194 - Voice<br>> 727-214-2508 - Fax<br>> http://bryanfields.net<br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> <br>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></div> </div></body>
</html>