<html><body><span style="font-family:Verdana; color:#000000; font-size:10pt;"><div><br></div><div>Corey,<br></div><div><br></div><div>Check The BAUD RATE of your gps - see your manual appendix pg 33</div><div>I don't know what the rate needs to be for rtcm.</div><div>Likely the reason you see no output assuming the output is turned on.<br></div><div><br></div><div>Perhaps someone else can chime in on this.</div><div><br></div><div>...mike/kb8jnm</div><div><br></div>
<blockquote id="replyBlockquote" webmail="1" style="border-left: 2px solid blue; margin-left: 8px; padding-left: 8px; font-size:10pt; color:black; font-family:verdana;">
<div id="wmQuoteWrapper">
-------- Original Message --------<br>
Subject: Re: [App_rpt-users] Gps18 lvc<br>
From: "COREY BADGLEY" <<a href="mailto:kc7mrq@bresnan.net">kc7mrq@bresnan.net</a>><br>
Date: Sat, November 01, 2014 10:51 am<br>
To: <<a href="mailto:mike@midnighteng.com">mike@midnighteng.com</a>><br>
<br>
<br>
The rtcm interface is set up but I'm wondering if the gps require <br>
initialization. No Data on rxd or a one sec pps when I hook the gps up to <br>
power<br>
<br>
On Sat, 01 Nov 2014 07:31:21 -0700<br>
<<a href="mailto:mike@midnighteng.com">mike@midnighteng.com</a>> wrote:<br>
> <br>
> <br>
> Corey,Not familiar with the model but do you need to go through the menu and <br>
>turn on (enable) the data interface ?<br>
> ...mike/kb8jnm<br>
> <br>
> -------- Original Message --------<br>
> Subject: [App_rpt-users] Gps18 lvc<br>
> From: "COREY BADGLEY" <<a href="mailto:kc7mrq@bresnan.net">kc7mrq@bresnan.net</a>><br>
> Date: Sat, November 01, 2014 9:48 am<br>
> To: <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
> <br>
> <br>
> I purchased two garmin 18 lvc to hook to a rtcm. No data output on rxd or <br>
>pps <br>
> when I apply 5v. Is there a step I a step I am missing when hooking them up?<br>
> <br>
> <br>
> Best regards,<br>
> <br>
> Corey Badgley<br>
> _______________________________________________<br>
> App_rpt-users mailing list<br>
> <a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
> <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
> <br>
> To unsubscribe from this list please visit <br>
><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to <br>
>the bottom of the page. Enter your email address and press the "Unsubscribe <br>
>or edit options button"<br>
> You do not need a password to unsubscribe, you can do it via email <br>
>confirmation. If you have trouble unsubscribing, please send a message to the <br>
>list detailing the problem. <br>
> <br>
<br>
Best regards,<br>
<br>
Corey Badgley<br>
</div>
</blockquote></span></body></html>