<html>
<head>
<meta content="text/html; charset=utf-8" http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Chuck,<br>
Thanks for clarifying the IP issue. The board upgraded just fine
once I made the change.<br>
<br>
Corey<br>
<div class="moz-cite-prefix">On 11/14/2014 11:27 PM, Chuck Henderson
wrote:<br>
</div>
<blockquote
cite="mid:CADEYVwj=UeTqkKzfERG8Oz+Rj+XZKYH649TCjaYYqtoUFoQ7og@mail.gmail.com"
type="cite">
<div dir="ltr">set the bootloader IP to be the same as the voter
board IP, or make it different than anything else on the
network. It is the IP that the voter board uses when it is
running the bootloader code. It can not have the same IP as
your laptop. That will not work.</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Sat, Nov 15, 2014 at 12:10 AM, Corey
<span dir="ltr"><<a moz-do-not-send="true"
href="mailto:kc7mrq@bresnan.net" target="_blank">kc7mrq@bresnan.net</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex"><br>
I built a through hole voter board and interfaced it to a
GPS 18 LVC and my server. I set the board up as a master,
transmit. The LED shows the GPS locked and 98 command shows
the GPS,<br>
but I am getting the following error when telnetting into
the board:<br>
<br>
Warning: GPS Data time period elapsed.<br>
<br>
The error is timestamped and occurs every second. I made
sure the data format was NMEA per archived messages on here
by connecting the GPS to SNSRCFG. The config appears to be
set up correctly.<br>
What other areas do I need to look at to fix this warning?<br>
<br>
I did notice you can choose quite a few NMEA messages in the
SNSRCFG profile. Does it matter if all are checked?<br>
<br>
I have a second issue with updating the firmware. The board
is at Rev 1.41. I tried updating it, but haven't had any
luck so far. Nothing happens when I click on the "capture
target" button after resetting the voter board. The target
ip is the voter board and the bootloader ip in the voter is
my laptop with ENC_Loader.<br>
<br>
The IC(s) were originally programmed by a friend in another
state so I never experienced what it take to do the initial
programming.<br>
<br>
<br>
Thanks for your help,<br>
Corey<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a moz-do-not-send="true"
href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a><br>
<a moz-do-not-send="true"
href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users"
target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a
moz-do-not-send="true"
href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users"
target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
and scroll down to the bottom of the page. Enter your email
address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via
email confirmation. If you have trouble unsubscribing,
please send a message to the list detailing the problem. </blockquote>
</div>
<br>
</div>
</blockquote>
<br>
</body>
</html>