<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>I use a large 9 conductor shielded cable 16# wire that I is used in acces control system. got a 1000 feet roll doing nothing. I connect the shield on one side only, and I use one of the conductor for ground both the audio and signaling will switch that to 2 different cable.<div><br></div><div>so aside the obvious typo about pin 26 ;-) wich is 23.. I was in the ball park.. </div><div><br></div><div><br><div>Thanks both Ramesh and Jon for the info!</div><div><br></div><div><br><br><div>> Date: Tue, 18 Nov 2014 08:49:33 -0500<br>> From: jrorke@cogeco.ca<br>> CC: app_rpt-users@ohnosec.org<br>> Subject: Re: [App_rpt-users] good connection to URI?<br>> <br>> Just to add to Ramesh's pinouts<br>> <br>> TKR 850 -------- URI<br>> <br>> 8 (TD) --------- 23 (R_out)<br>> 9 (TA) --------- 22 (L_out)<br>> 10 (RD)-------- 21 (Mic in)<br>> 16 (EPTT)-------1 (PTT)<br>> 17 (SC) --------- 8 (Cor in)<br>> 12 (RXG) ------19 (Gnd)<br>> 19 (TXG) ------ 20 (Gnd)<br>> <br>> You may need to add the extra audio grounds RXG and TXG.<br>> <br>> Jon VA3RQ<br>> <br>> <br>> <br>> <br>> On 11/16/2014 10:11 PM, Ramesh Dhami (VA3UV) wrote:<br>> > Hi Pierre:<br>> ><br>> > Try this:<br>> ><br>> > TKR 850 URI<br>> ><br>> > 8 23<br>> > 9 22<br>> > 10 21<br>> > 16 1<br>> > 25 8<br>> ><br>> ><br>> > This is per my external MUX and how I have my 850 setup for dual mode <br>> > (DV and FM).<br>> ><br>> > Note, you will need to configure the usbradio.conf file appropriately <br>> > to send the tone out on the RIGHT channel and the Audio out on the <br>> > LEFT channel.<br>> ><br>> > Let me know how it goes!<br>> ><br>> > Ramesh.<br>> ><br>> ><br>> > On 16/11/2014 11:13 AM, pete M wrote:<br>> >> Hi guys..<br>> >><br>> >> ast week i did a harness to hook my tkr-750 ver 2 to a URI<br>> >><br>> >> here is what I did:<br>> >><br>> >> tkr-750 pin ----- uri<br>> >><br>> >> 8 to 22 (ctcss tone to tkr)<br>> >> 9 to 23 (voice to tkr)<br>> >> 10 to 21 (audio to uri)<br>> >> 12 to 19 (ground)<br>> >> 16 to 1 (ptt)<br>> >> 17 to 8 (cor)<br>> >><br>> >> I dont need the cor cause I want to do all the signaling by dsp but<br>> >> still hoocked it up in case..<br>> >><br>> >> So does this make sens? cause I cant have the ctcss level right.<br>> >><br>> >> I try to switch the ctcss and voice from left to right in case I had<br>> >> reverse the wiring.<br>> >> put both channel as tone and voice to test. no go I cant send ctcss from<br>> >> the URI.<br>> >><br>> >> I know I can send it from the repeater itself.. But I want to control<br>> >> when it is sent.<br>> >><br>> >> Thanks for taking the time to help me ;-)<br>> >><br>> >><br>> >><br>> >><br>> >><br>> >><br>> >> _______________________________________________<br>> >> App_rpt-users mailing list<br>> >> App_rpt-users@ohnosec.org<br>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> >><br>> >> To unsubscribe from this list please visit <br>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll <br>> >> down to the bottom of the page. Enter your email address and press <br>> >> the "Unsubscribe or edit options button"<br>> >> You do not need a password to unsubscribe, you can do it via email <br>> >> confirmation. If you have trouble unsubscribing, please send a <br>> >> message to the list detailing the problem.<br>> >><br>> ><br>> > _______________________________________________<br>> > App_rpt-users mailing list<br>> > App_rpt-users@ohnosec.org<br>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> ><br>> > To unsubscribe from this list please visit <br>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll <br>> > down to the bottom of the page. Enter your email address and press the <br>> > "Unsubscribe or edit options button"<br>> > You do not need a password to unsubscribe, you can do it via email <br>> > confirmation. If you have trouble unsubscribing, please send a message <br>> > to the list detailing the problem.<br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> <br>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></div></div></div> </div></body>
</html>