<html><head></head><body>Straight away, get rid of the "functions =functions-repeater" line.<br>
<br>
Leave the "functions=functions-remote" line in.<br>
<br><br><div class="gmail_quote">On November 30, 2014 9:54:22 PM EST, Sam Nabkey <sam.nabkey@gmail.com> wrote:<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<div dir="ltr"><div><div><div>Okay--- Update....</div></div></div><div><br /></div><div>I have some sort of success on an ACID Install and It appears to almost work...</div><div><br /></div><div>IF I connect to the node, it tells me 'invalid Frequency' then the node number 'Connected'</div><div><br /></div><div>IF I poll the freq, it comes back as correct and the radio displays the proper freq of the init memory channel. no sweat.</div><div><br /></div><div>I can bump up down all around.. </div><div><br /></div><div>IF i change freqs, it complains about 'invalid frequency' and the display doesn't change. IF I bump up or down the bumped frequency shows up on the radio, and if I bump the other direction it will be right on.</div><div><br /></div><div>Modes don't switch</div><div>says it does, but doesn't.</div><div><br /></div><div>Ideas?</div><div><br /></div><div>Here is the rpt.conf from my remote node... </div><div><br
/></div><div><div>[582]; Ada IC-706 Remote Base</div><div><br /></div><div>rxchannel=SimpleUSB/usb ; Rx audio/signalling channel</div><div><br /></div><div>functions = functions-remote</div><div>functions = functions-repeater</div><div>memory = memory</div><div><br /></div><div>remote = ic706<span class="" style="white-space:pre"> </span></div><div>ioport = /dev/ttyUSB0</div><div>civaddr = 88<span class="" style="white-space:pre"> </span></div><div>authlevel=0</div><div><br /></div><div>[functions-remote]</div><div>0=remote,1 ; Retrieve Memory</div><div>1=remote,2 ; Set freq.</div><div>2=remote,3 ; Set tx PL tone</div><div>3=remote,4<span class="" style="white-space:pre"> </span> ; Set rx PL tone</div><div>6=remote,6 ; Set Mode 1=FM 2=USB 3=LSB 4=AM</div><div>40=remote,100
; Rx PL off</div><div>41=remote,101 ; Rx PL on</div><div>42=remote,102 ; Tx PL off</div><div>43=remote,103 ; Tx PL on</div><div>44=remote,104 ; Low Power</div><div>45=remote,105 ; Medium Power</div><div>46=remote,106 ; High Power</div><div>711=remote,107 ; Bump -20</div><div>714=remote,108 ; Bump -100</div><div>717=remote,109 ; Bump -500</div><div>713=remote,110 ; Bump +20</div><div>716=remote,111 ; Bump +100</div><div>719=remote,112 ; Bump +500</div><div>721=remote,113
; Scan - slow</div><div>724=remote,114 ; Scan - quick</div><div>727=remote,115 ; Scan - fast</div><div>723=remote,116 ; Scan + slow</div><div>726=remote,117 ; Scan + quick</div><div>729=remote,118 ; Scan + fast</div><div>79=remote,119 ; Tune</div><div>51=remote,5 ; Long status query</div><div>52=remote,140<span class="" style="white-space:pre"> </span> ; Short status query</div><div>67=remote,210<span class="" style="white-space:pre"> </span> ; Send a *</div><div>69=remote,211<span class="" style="white-space:pre"> </span> ; Send a #</div><div><br /></div><div>[nodes]</div><div>581 = <a href="http://radio@192.168.17.201/581,NONE">radio@192.168.17.201/581,NONE</a></div><div>582 = <a
href="http://radio@127.0.0.1/582,NONE,y">radio@127.0.0.1/582,NONE,y</a></div><div><br /></div><div>[nodes](+)</div><div>#include nodes.include</div><div><br /></div><div>[memory]</div><div>init = 14.250,100.0,u ; 14.250MHz upper sideband</div><div>00 = 146.460,100.0,sht</div><div>01 = 146.940,100.0,-l</div><div>02 = 14.250,100.0,u ; 14.250MHz upper sideband</div></div><div><br /></div><div><br /></div><div>It is short and sweet.. Works the same if I use the default from the Dupral site.. works the same if I copy someone elses. I stripped all the stuff out of it that it seems not to care about to make it blatantly simple.</div><div><br /></div><div>Thanks for the help!</div><div><br /></div><div><br /></div></div><div class="gmail_extra"><br /><div class="gmail_quote">On Sun, Nov 30, 2014 at 11:25 AM, <span dir="ltr"><<a href="mailto:mike@midnighteng.com" target="_blank">mike@midnighteng.com</a>></span> wrote:<br /><blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex"><div><span style="font-family:Verdana;color:#000000;font-size:10pt"><div><br /></div><div>As far as the BBB, you may not be defining the serial com correctly, but I don't know that from what you have provided for info.<br /></div><div><br /></div><div>Could you send your entire < [xxxnodeconfig] from rpt.conf > from your acid install to me to understand what is or is not happening.</div><div><br /></div><div>It's hard to say a thing without more info. Probably a type error and you need other set of eyes.<br /></div><div>Also, is it defined as a stand alone RB node </div><div>(ie 29261 = <a href="http://radio@127.0.0.1/29261,NONE,y" target="_blank">radio@127.0.0.1/29261,NONE,y</a> ; ,y =remote base)<br /></div><div><br /></div><div><br /></div><div>...mike/kb8jnm</div><div><br /></div><div><br /></div><blockquote style="border-left:2px solid
blue;margin-left:8px;padding-left:8px;font-size:10pt;color:black;font-family:verdana">
<div><span class="">
-------- Original Message --------<br />
Subject: [App_rpt-users] Remote Base setup<br />
From: Sam Nabkey <<a href="mailto:sam.nabkey@gmail.com" target="_blank">sam.nabkey@gmail.com</a>><br />
Date: Sun, November 30, 2014 8:46 am<br />
To: Allstar app_rpt-users Group <<a href="mailto:app_rpt-users@ohnosec.org" target="_blank">app_rpt-users@ohnosec.org</a>><br />
<br />
<div dir="ltr">Hello all...<div><br /></div><div>I have been working on an agile remote base using an Icom 706. I have seen a lot of posts and read a lot of ideas on using this radio.</div><div><br /></div><div>I first attemped using this under the Beagle Bone but I didn't have any luck. SO I switched to an ACID install that was previously working as a Repeater Node.</div><div><br /></div><div>I first added the remote stuff back to the rpt.conf - and the symptom returned.</div><div><br /></div><div>The only working config has the line 'remote = ic706' commented out.</div><div><br /></div><div>Anyone have any ideas on why the USB interface won't start, or the node would die just because the remote statement was added?</div><div><br /></div><div>I could use some pointers?<br clear="all" /><div><br /></div>-- <br /><div><div dir="ltr"><div></div><div><b>Samuel T. Nabkey - K8SN</b></div><div><br /></div><div><br /></div><br /><div></div></div></div> </div></div>
</span><hr />_______________________________________________<span class=""><br />
App_rpt-users mailing list<br />
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a><br />
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br />
<br />
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br />
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
</span></div>
</blockquote></span></div>
<br />_______________________________________________<br />
App_rpt-users mailing list<br />
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br />
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br />
<br />
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br />
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br /></blockquote></div><br /><br clear="all" /><div><br /></div>-- <br /><div class="gmail_signature"><div dir="ltr"><p></p><p><b>Samuel T. Nabkey - K8SN</b></p><p><b><img src="http://portal.midstatesecurity.com/Images/wmtg.gif" width="96" height="70" /><br /></b><b style="background-color:rgb(255,255,255)"><font color="#006600">Project Manager / Repeater Owner | West Michigan Technical Group</font></b></p><p><span style="font-size:9pt;color:rgb(54,95,145)">DMR 3126098-100 | 442.175/R 103.5HZ | WX8GRR-B | IRLP 4168 | Allstar 28789</span></p><p><span style="font-size:9pt;color:rgb(54,95,145)"> </span><span style="font-size:10pt;color:rgb(51,102,255)">Work 616.257.1125 | Other 616.284.1358 | Fax 616.257.1101</span></p><p><i><font color="#666666"><a href="mailto:sam.nabkey@gmail.com"
target="_blank">sam.nabkey@gmail.com</a> | <a href="http://www.k8sn.org/" target="_blank">http://www.k8sn.org</a> </font></i></p><p><br /></p><br /><p></p></div></div>
</div>
<p style="margin-top: 2.5em; margin-bottom: 1em; border-bottom: 1px solid #000"></p><pre class="k9mail"><hr /><br />App_rpt-users mailing list<br />App_rpt-users@ohnosec.org<br /><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br /><br />To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br />You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </pre></blockquote></div><br>
-- <br>
Sent from my Android phone with K-9 Mail. <br>
Please excuse my brevity and typing errors.</body></html>