<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><font style="" color="#000000" face="Tahoma,sans-serif">My thinking is your problem is either levels or maybe you are running non deemphasized audio with simpleusb causing unequal tome levels. If so you need to program the Motorola for deemphasized audio out OR set the deemphasis=yes in simpleusb.conf. You should also run plfilter=on which is the default.<br><br>Skewed equalization can definitely cause poor or no DTMF decoding. The radio relaxed should have nothing to do with it.<br> <br>The BBB DTMF decoding works fine if the levels and equalization are correct out of the radio.<br><br>YHou also need to use preemphasis going into the Motorola with simpleusb or your audio will sound flat (lacking high-end) at the other rx end. There is no SW setting for this. <br><br></font><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">http://www.crompton.com/hamradio</font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="stopSpelling">From: EUglum@aol.com<br>Date: Mon, 22 Dec 2014 11:57:29 -0500<br>To: app_rpt-users@ohnosec.org<br>Subject: [App_rpt-users] Beagle Bone DTMF issues<br><br>
<font id="ecxrole_document" color="#000000" face="Arial" size="2">
<div><font style="BACKGROUND-COLOR:transparent;" color="#000000" face="Arial" size="2"> I just successfully installed Doug's (WA3DSP)
Beagle Bone Black installation on a two node repeater system using two URI's and
a Belkin 4 port USB hub in an attempt to remove my power hungry old P4 rack
server from All Star service. Everything seems to be running well on the
BBB with only 14% CPU usage on stand by (2 nodes) and little to no audio
distortion while testing. </font></div>
<div><font style="BACKGROUND-COLOR:transparent;" color="#000000" face="Arial" size="2"></font> </div>
<div><font style="BACKGROUND-COLOR:transparent;" color="#000000" face="Arial" size="2"> I am having a heck of a time getting either node to reliably
decode DTMF especially when using Motorola transceivers. (On the old
P4 server, the DTMF decoded remarkably well using any radio...) I have been
looking at the old P4 config files and comparing them to the BBB config in an
attempt to see what has changed... Doug has "radio relax" turned off by default
(normally on by default in the acid release). Is this relevant?
Thanks!</font></div>
<div> </div>
<div>-Eric (KB6BZZ) </div>
<div><font style="BACKGROUND-COLOR:transparent;" color="#000000" face="Arial" size="2"></font> </div>
<div><font style="BACKGROUND-COLOR:transparent;" color="#000000" face="Arial" size="2"> </font></div><font style="BACKGROUND-COLOR:transparent;" color="#000000" face="Arial" size="2">
<div><br></div></font></font><br>_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.</div> </div></body>
</html>