<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>Well, that's really interesting, because I just connected node 2002 to your node 41488,<br>then remote controlled it to connect outbound to 2009, both of which worked just fine.<br><br>try it again.<br><br>Jim, WB6NIL<br><br><div>> From: david@k0pwo.com<br>> To: szingman@msgstor.com; app_rpt-users@ohnosec.org<br>> Date: Sun, 28 Dec 2014 11:54:19 -0700<br>> Subject: Re: [App_rpt-users] Error Message When Attempting to Connect<br>> <br>> Hello Steve,<br>> <br>> That worked perfectly for my node connecting to my hub which is on the same<br>> LAN. So that part is working now. However, my repeater node will still not<br>> connect outbound to any other nodes which has me stumped. <br>> <br>> However, another node was able to connect to my repeater node with an<br>> inbound connection just a few minutes ago. <br>> <br>> So any ideas as to what I should look at for my outbound node connection<br>> problem?<br>> <br>> Thanks again,<br>> <br>> David<br>> <br>> -----Original Message-----<br>> From: app_rpt-users-bounces@ohnosec.org<br>> [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Zingman<br>> Sent: Sunday, December 28, 2014 11:39 AM<br>> To: app_rpt-users@ohnosec.org<br>> Subject: Re: [App_rpt-users] Error Message When Attempting to Connect<br>> <br>> David,<br>> Try this:<br>> <br>> On the hub box:<br>> 41488 = radio@127.0.0.1:4572/41488,NONE<br>> 40968 = radio@192.168.20.243:4569/40968,NONE<br>> <br>> On the repeater box:<br>> 40968 = radio@127.0.0.1:4569/40968,NONE<br>> 41488 = radio@192.168.20.235:4572/41488,NONE<br>> <br>> <br>> 73, Steve N4IRS<br>> <br>> <br>> On 12/28/2014 12:28 PM, app_rpt-users-request@ohnosec.org wrote:<br>> > Message: 1<br>> > Date: Sun, 28 Dec 2014 10:00:41 -0700<br>> > From: "David Dean K0PWO"<david@k0pwo.com><br>> > To: "'Jim Duuuude'"<telesistant@hotmail.com>, "'Allstar app_rpt-users<br>> > Group'"<app_rpt-users@ohnosec.org><br>> > Subject: Re: [App_rpt-users] Error Message When Attempting to Connect<br>> > to my hub<br>> > Message-ID:<006101d022bf$d064a8a0$712df9e0$@k0pwo.com><br>> > Content-Type: text/plain; charset="utf-8"<br>> ><br>> > This morning I followed the advice given by several members on the list. I<br>> added in the nodes section of both system<br>> ><br>> ><br>> ><br>> > 40968 =radio@192.168.20.1/40963,NONE<br>> <mailto:radio@192.168.20.1/40963,NONE> on the hub box<br>> ><br>> > 41488 =radio@192.168.20.1/41488,NONE<br>> <mailto:radio@192.168.20.1/41488,NONE> on the repeater box<br>> ><br>> ><br>> ><br>> > And I still get connection failed error messages<br>> ><br>> ><br>> ><br>> > Some back ground on what I have<br>> ><br>> ><br>> ><br>> > * Comcast internet<br>> ><br>> > * The Comcast supplied modem/router is bridged for modem gateway<br>> only<br>> ><br>> > * ASUS RT-AC68U Router which feeds a Cisco Switch which both boxes<br>> are currently plugged into<br>> ><br>> > * Node 41488 is my hub node and has port forwarding for port 4572<br>> which it is assigned and configured<br>> ><br>> > * NODE 40968 is my repeater node and port forwarding for port<br>> 4569 which it is assigned and configured<br>> ><br>> > * Both machines for the moment have ssh of 222 (default) set<br>> ><br>> > * 41488 (my hub) is using static ip (on my LAN) of 192.168.20.235<br>> ><br>> > * 40968 (my repeater) is using static ip (on my LAN) of<br>> 192.168.20.243<br>> ><br>> ><br>> ><br>> > The repeater was working fine up until about a month ago when It quit<br>> connecting to any nodes.<br>> ><br>> ><br>> ><br>> > This morning I reset my router and reconfigured anything ? no change<br>> ><br>> > This morning I reformatted my repeater box and reconfigured using the<br>> Allstar Portal ? no change<br>> ><br>> ><br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> <br>> To unsubscribe from this list please visit<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to<br>> the bottom of the page. Enter your email address and press the "Unsubscribe<br>> or edit options button"<br>> You do not need a password to unsubscribe, you can do it via email<br>> confirmation. If you have trouble unsubscribing, please send a message to<br>> the list detailing the problem. <br>> <br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> <br>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></div> </div></body>
</html>