<div dir="ltr">Robert / Everyone,<div>What ever came of the problem you were having with getting your Allstar node to control your xcat? I'm planning on configuring mine here this week, and I'm looking for any help or advice as to any "tricks" that I should know. So far, it looks like all I need to do is define the remote base type as "xcat" in the remote stanza, and specify the serial port as well (I'll have two xcats, with a node for each). </div><div>Thanks and Happy New Year.</div><div><br></div><div>Sam <br>KJ6QFS</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Aug 1, 2013 at 8:38 PM, Robert Poff <span dir="ltr"><<a href="mailto:wb3awj@comcast.net" target="_blank">wb3awj@comcast.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><u></u>
<div>
Tim,<br>
<br>
Below are the pertinent lines from the rpt.conf.<br>
<br>
As to the CIV..... <br>
As we sit now, if I send a *017 command (supposed to load 146.520 simplex), the debug output says this:<span class=""><br>
<br>
String output was �� �'Ms:<br>
FE FE 20 E0 08 01 FD <br></span>
Which from what I find online says that function 08 is set memory mode.<br>
<br>
I think, the string should be : FE FE 20 E0 05 00 00 52 06 14 FD . Function 05 being set frequency with acknowledgment. <br>
Or possibly FE FE 20 E0 00 00 0 052 06 14 FD . Function 00 be set frequency without acknowledgment.<br>
<br>
To prove this out, I'll make a file with only those values in it with a hex editor, and blow it out ttyS0 to the xcat and see what happens.<br>
<br>
I'll anxiously await to see if anything is wrong.<br>
<br>
<br>
<br>
functions = functions-remote<br>
phone_functions = functions-remote<br>
<br>
lconn = PP3=1 ; Turn ON Fan<br>
ldisc = PP3=0 ; Turn OFF Fan<br>
memory = memory ; Section to hold memory entries (optional)<br>
remote = xcat ; Radio Command format<br>
; remote=ft897 for Yaesu FT-897 or<br>
; remote=rbi for Doug Hall RBI1<br>
; remote=kenwood for Kenwood mobiles such as the TMG707A<br>
; remote=ic706 for the Icom IC-706 <br>
; remote=xcat for Syntor X with XCAT board<br>
civaddr = 32 ; CI-V address in DECIMAL<br>
ioport = /dev/ttyS0 ; Specify port for serial port (optional)<br>
iospeed = 19200 ; COMM port speed<br>
dusbabek = yes ; either you need it or you don't<br>
authlevel = 0 ; Remote base authentication level<br>
; authlevel = 0 : Anyone can use it<br>
; authlevel = 1 : Requires log in, Waits for Tx key to ask for it<br>
; authlevel = 2 : Requires log in, asks for it automously<br>
;mars = 1 ; set=1 for IC-706 w/MARS mods (optional)<br>
;<br>
remote_inact_timeout=0 ; Inactivity timer for remote base nodes only (set to 0 to disable).<br>
remote_timeout=5400 ; Session time out for remote base. (set to 0 to disable)<br>
split2m = 600 ; Set the default tx split to 600 KC<br>
<br>
[functions-remote]<br>
0=remote,1 ; Retrieve Memory<br>
1=remote,2 ; Set freq. example : *1146*520*1 for 146.520 (-) Split<br>
; *1146*970*2 for 146.970 ( ) Simplex<br>
; *1147*330*3 for 147.330 (+) Split<br>
2=remote,3 ; Set tx PL tone<br>
3=remote,4 ; Set rx PL tone<br>
5=macro,1 ; Call MACROS<br>
40=remote,100 ; Rx PL off<br>
41=remote,101 ; Rx PL on<br>
42=remote,102 ; Tx PL off<br>
43=remote,103 ; Tx PL on<br>
44=remote,104 ; Low Power<br>
45=remote,105 ; Medium Power<br>
46=remote,106 ; High Power<br>
711=remote,107 ; Bump -20<br>
714=remote,108 ; Bump -100<br>
717=remote,109 ; Bump -500<br>
713=remote,110 ; Bump +20<br>
716=remote,111 ; Bump +100<br>
719=remote,112 ; Bump +500<br>
721=remote,113 ; Scan - slow<br>
724=remote,114 ; Scan - quick<br>
727=remote,115 ; Scan - fast<br>
723=remote,116 ; Scan + slow<br>
726=remote,117 ; Scan + quick<br>
729=remote,118 ; Scan + fast<br>
79=remote,119 ; Tune (brief AM transmission for automatic antenna tuner)<br>
61=remote,5 ; Long status query<br>
62=remote,140 ; Short status query<br>
67=remote,210 ; Send a *<br>
69=remote,211 ; Send a #<br>
91=remote,99,CALLSIGN,LICENSETAG ; Remote base login.<br>
<br>
<br>
[memory]<br>
; Memories for remote bases<br>
;Syntax : CC=RRR.RRR,PPP.P,AAAAA<br>
; C=Channel Number<br>
; R=RX Frequency<br>
; P=PL Frequency<br>
; A=Attributes<br>
;<br>
;Attributes : a=AM b=LSB f=FM u=USB<br>
; l=Low Power m=Medium Power h=High Power<br>
; -=Minus TX Offset s=Simplex +=Plus TX Offset<br>
; t=TX PL on r=RX PL on<br>
;<br>
init=145.670,123.0,shrt ;Set to this on startup<br>
<br>
00=145.510,123.0,sht ;Simplex, High Power, PL Encode<br>
01=145.530,123.0,sht ;Simplex, High Power, PL Encode<br>
02=145.550,123.0,sht ;Simplex, High Power, PL Encode<br>
03=145.570,123.0,sht ;Simplex, High Power, PL Encode<br>
<br>
<SNIP><br>
17=146.520,123.0,sht ;National Simplex/Calling<br>
<br>
<SNIP><span class="HOEnZb"><font color="#888888"><br>
<table cellspacing="0" cellpadding="0" width="100%">
<tbody><tr>
<td>
-- <br>
<i>Robert A. Poff</i><br>
<i>Loganville, PA</i><br>
<br>
<b><i><a href="http://wb3awj.hobby-site.org/loon.htm" target="_blank">S/V Loon</a></i></b><br>
<i><font>1983 Hunter 34</font></i><br>
<i><font>Havre de Grace, MD.</font></i><br>
<br>
WB3AWJ<i> - Allstar 27784</i><br>
<i>Powered by Linux</i> <br>
<br>
</td>
</tr>
</tbody></table></font></span><div><div class="h5">
On Thu, 2013-08-01 at 15:46 -0700, Tim Sawyer wrote:<br>
<blockquote type="CITE">
Maybe you have something wrong with your remote [functions] stanza. Let's see that that looks like on your system.
</blockquote>
<blockquote type="CITE">
--
</blockquote>
<blockquote type="CITE">
Tim
</blockquote>
<blockquote type="CITE">
:wq
</blockquote>
<blockquote type="CITE">
<br>
</blockquote>
<blockquote type="CITE">
On Aug 1, 2013, at 3:19 PM, Robert A. Poff WB3AWJ <<a href="mailto:wb3awj@comcast.net" target="_blank">wb3awj@comcast.net</a>> wrote:
</blockquote>
<blockquote type="CITE">
<br>
</blockquote>
<blockquote type="CITE">
<blockquote type="CITE">
Still digging on my Agile Remote.<br>
<br>
Acid with a Syntor X and XCAT.<br>
When I try to set a frequency, it's sending the CIV string to retrieve a memory from the radio.<br>
Not the string needed to set it from one of the memory entries in rpt.conf.<br>
<br>
Running Asterisk in the foreground with all the debug turned up here's what I see on the console executing a *017 command :<br>
<br>
@@@@ action: remote, param = 1<br>
@@@@ table index i = 5<br>
[Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:17558 function_remote: 28260 param=1 digitbuf=17 source=2<br>
[Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:17483 get_mem_set: digitbuf=17<br>
[Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:4225 retrieve_memory: memory=17 block=memory<br>
[Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:10476 rpt_telemetry: Tracepoint rpt_telemetry() entered mode=38<br>
[Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:10760 rpt_telemetry: Tracepoint rpt_telemetry() exit<br>
[Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:17486 get_mem_set: freq=146.520 res=0<br>
[Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:12849 collect_function_digits: rv=3<br>
[Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:10476 rpt_telemetry: Tracepoint rpt_telemetry() entered mode=3<br>
[Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:10760 rpt_telemetry: Tracepoint rpt_telemetry() exit<br>
Mode<br>
[Aug 1 15:06:09] NOTICE[2731]: app_rpt.c:13870 serial_remote_io: ioport=/dev/ttyS0 baud=14 iofd=0x19<br>
String output was �� �'Ms:<br>
FE FE 20 E0 08 01 FD <br>
[Aug 1 15:06:09] NOTICE[2732]: app_rpt.c:8420 wait_interval: Delay interval = 2000<br>
[Aug 1 15:06:10] WARNING[2731]: app_rpt.c:13910 serial_remote_io: -99999 Serial device not responding on node 28260<br>
Offset Initial/Simplex<br>
Frequency<br>
Offset<br>
CTCSS<br>
Frequency<br>
[Aug 1 15:06:10] NOTICE[2731]: app_rpt.c:8420 wait_interval: Delay interval = 2000<br>
[Aug 1 15:06:11] NOTICE[2732]: app_rpt.c:8424 wait_interval: Delay complete<br>
-- Hungup 'Zap/pseudo-1521668112'<br>
[Aug 1 15:06:12] NOTICE[2731]: app_rpt.c:8424 wait_interval: Delay complete<br>
-- <Zap/pseudo-1162233705> Playing 'rpt/invalid-freq' (language 'en')<br>
<br>
At one point I added a statement to printf myrpt->remoterig variable in the check_freq function.<br>
It returned "myrpt->remoterig=Mode" ?????<br>
Shouldn't that be "xcat", or "remote_rig_xcat" ?<br>
<br>
Any suggestions where I should be looking?<br>
<br>
<br>
</blockquote>
</blockquote>
<blockquote type="CITE">
<blockquote type="CITE">
</blockquote>
</blockquote>
<blockquote type="CITE">
<blockquote type="CITE">
Robert A. Poff<br>
Loganville, PA.<br>
<br>
<br>
"Lieutenant, target the offending power boat and launch photon torpedoes"
</blockquote>
</blockquote>
<blockquote type="CITE">
<blockquote type="CITE">
<br>
<br>
</blockquote>
</blockquote>
<blockquote type="CITE">
<blockquote type="CITE">
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
</blockquote>
</blockquote>
<blockquote type="CITE">
<br>
</blockquote>
</div></div></div>
<br>_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br></blockquote></div><br><br clear="all"><div><br></div>-- <br><div class="gmail_signature">KJ6QFS<br>Sam Skolfield</div>
</div>