<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><font style="" color="#000000" face="Tahoma,sans-serif">Cole,<br><br> Have you saved the FOB configuration data with the level set program? The USB port is stored there. For simpleusb it is stored like this in /etc/asterisk <br><br> cat simpleusb_tune_usb.conf<br><br>[usb]<br>; name=usb<br>; devicenum=0<br>devstr=1-1<br>rxmixerset=750<br>txmixaset=500<br>txmixbset=500<br><br>USB Radio is similar. You need to select each FOB by its name usb1, usb2 etc. or whatever you call them and then save it to create the config files.<br></font><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">http://www.crompton.com/hamradio</font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="stopSpelling">From: colecaz@gmail.com<br>To: app_rpt-users@ohnosec.org<br>Date: Sat, 17 Jan 2015 15:09:57 -0700<br>Subject: [App_rpt-users] Get the same USB port assigned to a node at startup each time?<br><br><style><!--
.ExternalClass p.ecxMsoNormal, .ExternalClass li.ecxMsoNormal, .ExternalClass div.ecxMsoNormal {
font-size:11.0pt;
font-family:"Calibri","sans-serif";
}
.ExternalClass a:link, .ExternalClass span.ecxMsoHyperlink {
color:blue;
text-decoration:underline;
}
.ExternalClass span.ecxMsoHyperlinkFollowed {
color:purple;
text-decoration:underline;
}
.ExternalClass span.ecxEmailStyle17 {
font-family:"Calibri","sans-serif";
color:windowtext;
}
.ExternalClass .ecxMsoChpDefault {
}
.ExternalClass div.ecxWordSection1 {
}
--></style><div class="ecxWordSection1"><p class="ecxMsoNormal">I’m a pure newbi to Asterisk/app_rpt and am trying to learn enough to see if it will work for an RLC-3 replacement for my club.</p><p class="ecxMsoNormal"> </p><p class="ecxMsoNormal">I have four nodes in test mode running on one server using USB FOBs and every time Asterisk starts the four USB FOBs get assigned to different nodes than they were on when Asterisk was shut down. Lsusb shows the FOBs are split with two on each internal USB bus, corresponding to the hardware USB controllers. I get good audio out of all four FOBs every time, just from different nodes than last time. The PC is a home built Intel G2130 of fairly recent vintage.</p><p class="ecxMsoNormal"> </p><p class="ecxMsoNormal">Is there a way to tie a USB hardware port to a particular node so I get the same node on the same hardware every time?</p><p class="ecxMsoNormal"> </p><p class="ecxMsoNormal">This is particularly critical in case of power failure so the site can come back up without operator intervention.</p><p class="ecxMsoNormal"> </p><p class="ecxMsoNormal">Thanks,</p><p class="ecxMsoNormal">Cole, AA7RD</p></div><br>_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.</div> </div></body>
</html>