<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>with a service monitor, i set it to peak at 2.4 or so with pl (which should be aprx 400 hz deviation or so.)</div><div><br></div><div>linking it to wb systems you will have to play around a bit. but these starting points worked for me (and have been using them for the last 4 years on 900.<br><br>others may (will?) have their own opinion; thiese numbers give a little cushion to start with.<br>--<div>Bryan</div><div>Sent from my iPhone 5.<span style="font-size: 13pt;">..No electrons were harmed in the sending of this message.</span></div><div><br><div><br></div></div></div><div><br>On Feb 5, 2015, at 21:52, Bryan Fields <<a href="mailto:Bryan@bryanfields.net">Bryan@bryanfields.net</a>> wrote:<br><br></div><blockquote type="cite"><div>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
I'm playing with a 900 mhz repeater and most FM on 902mhz is narrow
band. As this is a converted uniden LTR repeater it's setup for
narrow band.<br>
<br>
Looking at <a class="moz-txt-link-freetext" href="http://docs.allstarlink.org/drupal/node/92">http://docs.allstarlink.org/drupal/node/92</a> which is the
allstarlink network standard, rather than 3khz of deviation before
CTCSS/DCS, what's the value I should be shooting for here in a NBFM
system?<br>
<br>
I've been researching it and there are some posts from 2009 by
Steve, WA6ZFT saying that 1.5 KHz of deviation should be the target.<br>
Is there anything more official than this? Can we add some info on
this to the docs site?<br>
<br>
73's W9CR<br>
<meta http-equiv="content-type" content="text/html;
charset=ISO-8859-1">
<pre class="moz-signature" cols="78">--
Bryan Fields
727-409-1194 - Voice
727-214-2508 - Fax
<a class="moz-txt-link-freetext" href="http://bryanfields.net">http://bryanfields.net</a></pre>
</div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>App_rpt-users mailing list</span><br><span><a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a></span><br><span><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br><span></span><br><span>To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"</span><br><span>You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </span></div></blockquote></body></html>