<div dir="ltr">I keyed up my test radio which transmitted to the node radio and gave it silence with the right PL tone set, and then I waited. I set a 206.5 tone because I wanted to make sure the baofeng didn't filter it out with a high pass filter<br></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Mar 2, 2015 at 8:25 AM, Steve Agee <span dir="ltr"><<a href="mailto:n5zua@earthlink.net" target="_blank">n5zua@earthlink.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
<tt>The "meas=25995" indicates the node is seeing discriminator
audio, although just a tad bit low in level. So, it is making it
in OK. Can you elaborate on what conditions you have established
for the menu item 4 test?<br>
<br>
N5ZUA<br>
</tt><div><div class="h5"><br>
<div>On 3/2/2015 7:25 AM, Skyler F wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">First I am using the Baofeng radio for the second
node, and using speaker audio, which I understand is not the
best, but I am hoping I can at least get it to work.
<div><br>
</div>
<div>Second, I hit menu 2 <i>Auto detect RX noise level:</i></div>
<div><i><br>
</i></div>
<div><b>Tries=6, setting=563, meas=25995, sqnoise=168.</b></div>
<div><b><br>
</b></div>
<div>Now I hit menu 4 Auto detect CTCSS with carrier and CTCSS</div>
<div><br>
</div>
<div>And this is where I have issuees</div>
<div><b>Setting = 8.00 meas=0.00</b></div>
<div><b>RX CTCSS GAIN ADJUST FAILED</b></div>
<div><b><br>
</b></div>
<div>I also tried it with speaker audio instead of flat, but I
still couldn't get it to work. I remember at some point while
listening on the web transceiver a tiny bit of audio came
through but nothing really is getting through since. </div>
<div><br>
</div>
<div>Thanks,</div>
<div>Skyler</div>
<div><br>
<br>
</div>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Sun, Mar 1, 2015 at 10:59 PM, Steve
Agee <span dir="ltr"><<a href="mailto:n5zua@earthlink.net" target="_blank">n5zua@earthlink.net</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">From the
CLI, make sure you have correct CM108 fob selected (if more
than one is hooked up) and run CLI> "radio tune rxnoise"
without the quotation marks, with the receiver sending
discriminator audio to the fob, and you should be seeing
around 28000 as the level coming in. Call me if you need
more help. You already have my number.<br>
<br>
N5ZUA
<div>
<div><br>
<br>
On 3/1/2015 9:23 PM, Skyler F wrote:<br>
</div>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
<div>
I made the modification to the startech CM108 sound
fob. This is for a second node on the same machine.
Everything should be working, the node is transmitting
with audio and PTT is activating properly.<br>
<br>
The receive should be working too, I plugged it in to
my macbook and was able to hear the white noise just
fine and I could hear my voice when I keyed up.<br>
<br>
I also had Jeremy W0JRL help with everything on the
software, and we tried about everything from Flat
audio to speaker audio to COR to CTCSS but still no
receive audio coming through the network, it isn't
detecting anything when I am transmitting from my node
radio to the node.<br>
<br>
I was on the phone with him for almost two hours
trying anything we could think of, I did anything
hardware, and he modified anything software, but we
still got no audio through the network. We even turned
off the squelch and there was a dead carrier through
the network.<br>
<br>
Is there something wrong compatibility wise with this
fob? I did everything in the instructions and I got it
from here <a href="http://www.newegg.com/Product/Product.aspx?Item=N82E16829128002" target="_blank">http://www.newegg.com/Product/Product.aspx?Item=N82E16829128002</a>.<br>
<br>
I used this instruction manual<br>
<a href="http://www.repeater-builder.com/projects/fob/USB-Fob-Construction.pdf" target="_blank">http://www.repeater-builder.com/projects/fob/USB-Fob-Construction.pdf</a><br>
<br>
If this is a compatibility issue, it is sure a weird
one because the Txaudio worked fine.<br>
<br>
Is there a way to tell if any audio at all is coming
in to AllStar?<br>
<br>
What can I try next to troubleshoot?<br>
<br>
<br>
73<br>
Skyler KDØWHB<br>
<br>
-- <br>
Skyler Fennell<br>
</div>
</div>
<a href="http://amsatnet.info" target="_blank">amsatnet.info</a> <<a href="http://amsatnet.info" target="_blank">http://amsatnet.info</a>><br>
KDØWHB<br>
<a href="mailto:electricity440@gmail.com" target="_blank">electricity440@gmail.com</a>
<mailto:<a href="mailto:electricity440@gmail.com" target="_blank">electricity440@gmail.com</a>><span><br>
<br>
<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
and scroll down to the bottom of the page. Enter your
email address and press the "Unsubscribe or edit options
button"<br>
You do not need a password to unsubscribe, you can do it
via email confirmation. If you have trouble
unsubscribing, please send a message to the list
detailing the problem.<br>
</span></blockquote>
<br>
</blockquote>
</div>
<br>
<br clear="all">
<div><br>
</div>
-- <br>
<div>
<div dir="ltr"><font color="#38761d" face="arial narrow,
sans-serif">Skyler Fennell</font>
<div><font color="#38761d" face="arial narrow, sans-serif"><a href="http://amsatnet.info" target="_blank">amsatnet.info</a></font></div>
<div><font color="#38761d" face="arial narrow, sans-serif">KDØWHB</font></div>
<div><font color="#38761d" face="arial narrow, sans-serif"><a href="mailto:electricity440@gmail.com" target="_blank">electricity440@gmail.com</a></font></div>
</div>
</div>
</div>
</blockquote>
<br>
</div></div></div>
<br>_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></blockquote></div><br><br clear="all"><br>-- <br><div class="gmail_signature"><div dir="ltr"><font face="arial narrow, sans-serif" color="#38761d">Skyler Fennell</font><div><font face="arial narrow, sans-serif" color="#38761d"><a href="http://amsatnet.info" target="_blank">amsatnet.info</a></font></div><div><font face="arial narrow, sans-serif" color="#38761d">KDØWHB</font></div><div><font face="arial narrow, sans-serif" color="#38761d"><a href="mailto:electricity440@gmail.com" target="_blank">electricity440@gmail.com</a></font></div></div></div>
</div>