<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<tt>If things are working well using DSP, then why would you want to
change them up, unless you want to use a slower computer that does
not have the horsepower to do DSP?<br>
<br>
In /etc/asterisk/usbradio.conf change the line that currently reads:<br>
carrierfrom=dsp to read carrierfrom=usb or carrierfrom=usbinvert<br>
The "usb" setting is for COS active HIGH (+5 VDC) and "usbinvert"
is for active LOW, which would pull the line to ground when
active. In the LOW situation, use a volt meter to make sure there
is voltage present to be able to be pulled down. You will also
need to change the line that reads:<br>
ctcssfrom=dsp to ctcssfrom=usb if you have a separate line for
CTCSS detection. Some radios, like the GM300, let you put both the
cos AND ctcss on the same line. In that case, set ctcssfrom=no to
ignore it.<br>
<br>
N5ZUA<br>
</tt><br>
<div class="moz-cite-prefix">On 3/7/2015 10:11 AM, Skyler F wrote:<br>
</div>
<blockquote
cite="mid:CAJNyT09FOcBK1-AHo3wR9XJ+u27p+TOhNhqKgyZpU4aE4Hcb2w@mail.gmail.com"
type="cite">How can I trigger the Allstar receiver when it gets a
voltage from COS or switch 3 on the fob?
<div><br>
<div> Does it automatically trigger when a voltage is there? </div>
<div><br>
</div>
<div>I added 5v to the COR URIx and did not get any trigger and
I also tried closing SW3 on the home brew fob. Am I doing
something wrong?</div>
<div><br>
</div>
<div>I will be getting a COS out on my radio and want to use The
CTCSS on the radio instead of in AllStar.<br>
<div><br>
</div>
<div><br>
</div>
Thanks
<div>Skyler</div>
</div>
</div>
<br>
<br>
-- <br>
<div dir="ltr"><font color="#38761d" face="arial narrow,
sans-serif">Skyler Fennell</font>
<div><font color="#38761d" face="arial narrow, sans-serif"><a
moz-do-not-send="true" href="http://amsatnet.info"
target="_blank">amsatnet.info</a></font></div>
<div><font color="#38761d" face="arial narrow, sans-serif">KDŘWHB</font></div>
<div><font color="#38761d" face="arial narrow, sans-serif"><a
moz-do-not-send="true"
href="mailto:electricity440@gmail.com" target="_blank">electricity440@gmail.com</a></font></div>
</div>
<br>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>
<a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
To unsubscribe from this list please visit <a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </pre>
</blockquote>
<br>
</body>
</html>