<HTML><HEAD></HEAD>
<BODY dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000">
<DIV>As we continue to grow we are committed to using Allstar. But we are
already at a loss as to how to put multiple repeaters on the air from the same
site. Sure, we can use multiple URI’s I think and a single PC. But we prefer
RTCM’s and they cost $$$. The real question is the use of external controllers
like an Arcom RC-210. They have 3 ports plus a 4th basic port. We have 2m, 440
and 900, plus a WX receiver. URI’s are cheaper but if we do the PC
approach can we declare separate config files/directories, or would we need to
install something like OpenVZ and mount each USB device in separate containers?
PC’s at remote sites concern me especially without redundant power supplies. A
RC-210 would allow the use of only one RTCM and the ports would be linked to
through the RC-210. One node number for three repeaters, although that isn’t my
preference. How much audio delay could be expected using an external
controller?</DIV>
<DIV> </DIV>
<DIV>Thank you in advance.</DIV>
<DIV> </DIV>
<DIV>Wayne</DIV></DIV></DIV></BODY></HTML>