<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>what not a single answer... wow..<div><br><br><div><hr id="stopSpelling">From: petem001@hotmail.com<br>To: app_rpt-users@ohnosec.org<br>Date: Thu, 26 Mar 2015 12:54:46 -0400<br>Subject: [App_rpt-users] signal level good enough for a URI-X?<br><br>
<style><!--
.ExternalClass .ecxhmmessage P {
padding:0px;
}
.ExternalClass body.ecxhmmessage {
font-size:12pt;
font-family:Calibri;
}
--></style>
<div dir="ltr">Anyone can confirm if a signal level of 70~90mVrms with an Output impedance: 1k§Ù or less
Coupling: AC coupling
Frequency response: ¡¾2.5dB at
10~3000Hz is enough to drive a URI or should I use the included pre amp in the URI-X?<div><br></div><div>trying to use the RD line from a tkr-750 to do USBRadio control of a node. </div><div><br></div><div>thanks</div><div><br></div><div>And while I am at it, </div><div><br></div><div>pin 10 and 11 of the tkr both are signal input, 10 is TD (tx data) and 11 is TA (tx audio) If I feed one side of the output to the pin 10 (TD) for tone signal and the other side to (TA) and apply repeated audio would that make sens?</div><div><br></div><div>Cause I did try that and It did not seem to work.. </div><div><br></div><div>thanks again for your input</div><div><br></div><div>Pierre VE2PF</div><div><br></div><div><br></div> </div>
<br>_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.</div></div> </div></body>
</html>