<html><body><div style="color:#000; background-color:#fff; font-family:HelveticaNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;font-size:16px"><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr">All,</div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr"><br></div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr">I have just set up my Allstar node using the latest ACID image. I have the node connected to the Allstar network successfully, with Echolink and APRS interfaces working.</div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr"><br></div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr">I am now trying to set up an IAX2 trunk between my existing asterisk installations and my Allstar node asterisk.</div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr"><br></div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr">For background, I have Asterisk 8 on a 64 bit Intel machine as the main PBX, and an auxiliary PBX running asterisk 11 on a beagle bone black connected by an IAX2 trunk. GIven the ease of set up there, I figured it would be relatively simple to connect the asterisk 8 machine to the ACID asterisk instance with another IAX2 trunk. However it didn't work out that way.</div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr"><br></div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr">I created an iax.conf file in /etc/asterisk/custom sub-directory on the ACID machine with credentials in the same format as I had used between the other two asterisks and then created a corresponding trunk on the asterisk 8 machine. Both asterisks show the trunk as connected and running, but when I try to route a call from the asterisk 8 machine to the ACID machine, the asterisk on the ACID machine rejects the call claiming the sending node did not authenticate correctly.</div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr"><br></div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr">Asterisk on the ACID machine shows some unknown information elements coming from the asterisk 8 box when it tries to authenticate the call so I am wondering if there is some version difference between the instance of asterisk running on ACID and the asterisk 8 I am using as my main PBX.</div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr"><br></div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr">Does anyone have any thoughts on this? Anyone out there have a similar configuration where you tied an ACID machine to another asterisk instance using an IAX2 trunk?</div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr"><br></div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr">Thanks,</div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr"><br></div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr">Mitch Mitchell, AE5HO</div><div id="yui_3_16_0_1_1428687370573_3128" dir="ltr"><br></div></div></body></html>