<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>Got 2 repeater linked together at the same site<div><br></div><div>One msf5000 UHF one tkr750 VHF</div><div><br></div><div>If I listen to the UHF repeater the audio is nice and have low and high sound (in the limit of 3hz of course)</div><div>No mather if the receiving repeater is the VHF or UHF. I even asked a friend to switch from VHF to UHF on his radio and I could not detect wich was the source beside from the courtasy tone and the end if his TX. </div><div><br></div><div>But on the VHF side the audio is High pitch no bass.. </div><div><br></div><div>here is my config in usbsound.conf for the TKR750</div><div><br></div><div><div>[usb28739] ; VHF</div><div><br></div><div>hdwtype=0<span class="Apple-tab-span" style="white-space:pre"> </span></div><div>rxboost=1</div><div>txboost=1</div><div>rxctcssrelax=1</div><div>txctcssdefault=103.5</div><div>rxctcssfreqs=103.5</div><div>txctcssfreqs=103.5</div><div>;rxctcssoverride=0</div><div>carrierfrom=usbinvert</div><div>ctcssfrom=dsp</div><div>rxdemod=flat</div><div>txprelim=no</div><div>txlimonly=no</div><div>txtoctype=notone</div><div>txmixa=voice</div><div>txmixb=tone</div><div>invertptt=0</div><div>duplex=1</div><div>rxondelay=1</div><div>rxnoisefiltype=0</div><div>eeprom=0</div></div><div><br></div><div>Is there a something obvious that I miss?</div><div><br></div><div>Thanks..</div><div>Pierre</div><div><br></div> </div></body>
</html>