<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>yup I did in early test, and it did not seam to fix it.. <div><br></div><div>Now I did change it and relaoded the settings un the asterisk cli and it did made a BIG change..</div><div><br></div><div>strange.. did I forgot to reload the first time? maybe..</div><div><br></div><div>thanks again for the help</div><div><br></div><div><br><div><hr id="stopSpelling">From: wb3awj@comcast.net<br>To: petem001@hotmail.com<br>Subject: Re: [App_rpt-users] High pitch audio<br>Date: Fri, 15 May 2015 03:22:50 +0300<br><br>
<p style="" dir="ltr">Did you try txlimonly=yes ?<br></p>
<p dir="ltr">--<br>
Bob Poff<br>
Loganville, Pa<br>
<br></p>
<p dir="ltr">Thursday, 14 May 2015, 06:37PM -04:00 from pete M <petem001@hotmail.com>:</p>
<blockquote cite="14316430490001120673"><p dir="ltr">Got 2 repeater linked together at the same site<br>
One msf5000 UHF one tkr750 VHF<br>
If I listen to the UHF repeater the audio is nice and have low and high sound (in the limit of 3hz of course)<br>
No mather if the receiving repeater is the VHF or UHF. I even asked a friend to switch from VHF to UHF on his radio and I could not detect wich was the source beside from the courtasy tone and the end if his TX.<br>
But on the VHF side the audio is High pitch no bass..<br>
here is my config in usbsound.conf for the TKR750<br>
[usb28739] ; VHF<br>
hdwtype=0<br>
rxboost=1<br>
txboost=1<br>
rxctcssrelax=1<br>
txctcssdefault=103.5<br>
rxctcssfreqs=103.5<br>
txctcssfreqs=103.5<br>
;rxctcssoverride=0<br>
carrierfrom=usbinvert<br>
ctcssfrom=dsp<br>
rxdemod=flat<br>
txprelim=no<br>
txlimonly=no<br>
txtoctype=notone<br>
txmixa=voice<br>
txmixb=tone<br>
invertptt=0<br>
duplex=1<br>
rxondelay=1<br>
rxnoisefiltype=0<br>
eeprom=0<br>
Is there a something obvious that I miss?<br>
Thanks..<br>
Pierre<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
App_rpt-users@ohnosec.org<br>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </p>
</blockquote></div></div> </div></body>
</html>