<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>Thanks that will be a start.. But this mean I need to open my sip port to the internet cause my node is not here.. It is at the repeater site..<div><br></div><div>or I am thinking I could make myself a small asterisk server (without app_rpt) and link that server to my node by IAX?</div><div><br></div><div><br></div><div><br><br><div>> Date: Tue, 9 Jun 2015 19:25:47 -0400<br>> From: mike@midnighteng.com<br>> To: app_rpt-users@ohnosec.org<br>> Subject: Re: [App_rpt-users] use of an IP phone to monitor my node<br>> <br>> <br>> While I know nothing of the individual phone you have and perhaps someone<br>> has exact directions for you, I can give some universal notes...<br>> <br>> 1. Get a manual - probably available online.<br>> <br>> 2 most ip phones can be config'd via ip address. you should be able to use<br>> dhcp till you know what your wanting to do.<br>> <br>> 3. once you have your phone config'd for your network keep in mind you<br>> need to think ahead. issuing a sip id of 5xxx or 6xxx is probably a good<br>> starting point. give it a password, as many new types of hacks nowadays.<br>> <br>> when you get to this point, and need to config a somewhat matching config<br>> to sip.conf in your app_rpt<br>> <br>> This should start you out but some phones are unique and may require other<br>> parameters to be set.<br>> <br>> [5009] ;Portable-1<br>> deny=0.0.0.0/0.0.0.0<br>> username=5009<br>> secret=yourpass<br>> dtmfmode=rfc2833<br>> canreinvite=no<br>> context=radio-control<br>> host=dynamic<br>> trustrpid=yes<br>> sendrpid=no<br>> type=peer<br>> nat=no<br>> port=5060<br>> qualify=yes<br>> qualifyfreq=60<br>> transport=udp<br>> encryption=no<br>> callgroup=RPT<br>> pickupgroup=ALL<br>> dial=SIP/5009<br>> mailbox=5009<br>> permit=0.0.0.0/0.0.0.0<br>> callerid=Portable-1 <5009><br>> allow=ulaw,gsm,h263<br>> <br>> Hope that helps...<br>> <br>> ...mike/kb8jnm<br>> <br>> <br>> <br>> <br>> > I was given an IP phone about 6 months ago.It was left at my friend home<br>> > after he lost his job cause the company went bancrupt. (he was working<br>> > from home) they took the laptop but never asked for the phone and router<br>> > ;-) )<br>> > So I took it and it was trying to call home to download its firmware and<br>> > boot..<br>> > So I did a reset, now its waiting to know what do..<br>> > The model is a polycom IP335<br>> > Would it be possible to program it so that it call my node so that I could<br>> > remote monitor it..<br>> > That of course would be a learning experience about IP phone..<br>> > I also have an ATA , a grandstream ht701.. would that also work?<br>> > Thanks for the time you take to answer my nooby question.<br>> > Pierre<br>> ><br>> ><br>> > _______________________________________________<br>> > App_rpt-users mailing list<br>> > App_rpt-users@ohnosec.org<br>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> ><br>> > To unsubscribe from this list please visit<br>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down<br>> > to the bottom of the page. Enter your email address and press the<br>> > "Unsubscribe or edit options button"<br>> > You do not need a password to unsubscribe, you can do it via email<br>> > confirmation. If you have trouble unsubscribing, please send a message to<br>> > the list detailing the problem.<br>> <br>> <br>> _______________________________________________<br>> App_rpt-users mailing list<br>> App_rpt-users@ohnosec.org<br>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users<br>> <br>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></div></div> </div></body>
</html>