I'm working on various options for a voter project for the local club. One of the choices is of course using AllStar. I've used RTCM's in the past but in non-voting applications. I need to make sure I capture all of the items (other than receivers, antennas, etc) related to make voting happen via AllStar. <div><br><div><br></div><div>RTCM per remote receiver site.</div><div>Internet access at remote receiver site (or private LAN if also available at server site)</div><div>AllStar server at some site to perform the voting (possibly at TX site)</div><div>RTCM at the TX location (also used for one of the voting receivers)</div><div>GPS connected to the "master" TX RTCM  (only one needed per system, right?)</div><div>Internet access at the TX site if voting from there or RF one way link from server if not</div><div><br></div><div><br></div><div>Additionally, what is the realistic time delay to be expected between input audio/keying and the repeater TX audio/keying? If it's 3/4 to 1 second, seems like everyone will hear the last few syllables they uttered after they unkey. I know that annoys me and anticipate the club members won't like it either. </div></div><div><br></div><div>Has anyone developed a PC, RPi, BBB based voter to replace the GE, Motorola, JPS, Doug Hall, LDG systems? Maybe with some external audio stuff to go with the voter logic?</div><div><br></div>Thanks for any and all input <div>Mike / W5JR</div><div>Alpharetta GA</div><br><br>-- <br><div dir="ltr"><div><div><br>tnx<br></div>Mike / W5JR<br></div>Alpharetta GA<br></div><br>