<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><font style="" color="#000000" face="Tahoma,sans-serif">A couple of things.<br><br>First in the node section of rpt.conf - the section where your node number is defined - you want this. <br><br>morse=morse<br><br>This second name could have an attached a label and could be defined differently like -<br><br>morse=morse40961<br><br>where the numbers are your node number. In this case you do need to define the actual stanza with the correct name.<br><br>And define your ID, of course with your call. The /L is optional. The call can be any valid CW letters, numbers or punctuation:<br><br>idrecording=|iDE WA3DSP/L<br id="FontBreak"></font><br><font style="" face="Tahoma,sans-serif">Also further down you will have this defined -</font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif">[morse]</font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif">speed=20</font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif">frequency=800</font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif">amplitude=4096</font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif">idfrequency=750</font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif">idamplitude=512 ; 1024</font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif"><br></font><font style="" face="Tahoma,sans-serif">Make sure the amplitude is not too low. Here I have lowered it. Anything after a semicolon is a comment. Also the morse definition needs to follow the morse= definition shown above.</font><br><br><b><font style="font-size:16pt;" size="4">73 Doug</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">WA3DSP</font><font style="font-size:16pt;" size="4"><br></font><font style="font-size:16pt;" size="4">http://www.crompton.com/hamradio</font></b><font style="font-size:16pt;" size="4"><br></font><br><br><div><hr id="stopSpelling">Date: Mon, 3 Aug 2015 11:29:14 -0400<br>From: steves68@gmail.com<br>To: App_rpt-users@ohnosec.org<br>Subject: [App_rpt-users] CW id<br><br><p dir="ltr">I never hear the CW id on the local side on my allstar node. Even when I press *80 I get nothing.What settings should I look at. I am sitting here looking at a printout of the rpt.cfg file. Any suggestions would be appreciated.</p>
<p dir="ltr">Thanks, <br>
N4YOG <br>
Steve</p>
<br>_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.</div> </div></body>
</html>