<div dir="ltr">Hi Dave, <div><br></div><div>You can also try running K0KN's upgrade script. Every now and then I have a node act up and that fixes it. <a href="http://www.qsl.net/k0kn/scripts.html">http://www.qsl.net/k0kn/scripts.html</a></div><div><br></div><div>If you run nodesetup.sh you should able to re-download your config files too.</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Sep 7, 2015 at 8:33 PM, kk6ecm <span dir="ltr"><<a href="mailto:kk6ecm@gmail.com" target="_blank">kk6ecm@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">My experience says asterisk is not happy. Assuming you have gone though the<br>
tune process for your URI, it could mean that devstr=a-b in<br>
usbradio_tune_xxx does not match the USB address as seen in lsusb, e.g.<br>
<br>
Bus 00a Device 00b: ID 0d8c:013a C-Media Electronics, Inc.<br>
<br>
If that is OK, then I'd check for a typo in one of the asterisk .conf files.<br>
<br>
Bob<br>
kk6ecm<br>
<br>
-----Original Message-----<br>
From: <a href="mailto:app_rpt-users-bounces@ohnosec.org">app_rpt-users-bounces@ohnosec.org</a><br>
[mailto:<a href="mailto:app_rpt-users-bounces@ohnosec.org">app_rpt-users-bounces@ohnosec.org</a>] On Behalf Of Dave Newmyer<br>
Sent: Monday, September 07, 2015 7:09 PM<br>
To: <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
Subject: [App_rpt-users] Problem with a post-install on an inactive<br>
node(28781)<br>
<br>
Hello,<br>
<br>
I have been attempting to get my simplex node back up and running after<br>
being off of the air for a couple of years. The ULI device and radio<br>
are the same, but the computer, installation software, ect. are all<br>
different. I am using a new install from an acid-centos.iso I downloaded<br>
a couple of days ago.<br>
<br>
At post-install, I get the following:<br>
mpg123:no process killed.<br>
Asterisk ended with exit status 1<br>
Asterisk died with code 1<br>
Automatically restarting Asterisk<br>
<br>
This repeats over and over. I checked the archives, and found a series<br>
of postings from someone who had a similar problem some time back.<br>
In reading the log file /var/log/asterisk/messages the errors refer to<br>
a problem with Zaptel.<br>
<br>
One of the suggestions was to update Asterisk from SVN, then update Zaptel.<br>
<br>
After doing this, Asterisk started, and I was able to perform system<br>
info and time DTMF commands to my node.<br>
<br>
Later, I tried resetting the computer and after restarting it, I am back<br>
to the<br>
mpg123:no process killed.<br>
Asterisk ended with exit status 1<br>
Asterisk died with code 1<br>
Automatically restarting Asterisk<br>
<br>
Errors over and over and over again.<br>
<br>
I am thinking that possibly my config files on the AllStar.org website<br>
might have an issue, but on one of my re-installs of the software from<br>
the cd, I chose not to download the remote configs.<br>
<br>
Anyway, I am not sure what to try next.<br>
<br>
73,<br>
<br>
Dave N<br>
N0KM<br>
<br>
<br>
---<br>
This email has been checked for viruses by Avast antivirus software.<br>
<a href="https://www.avast.com/antivirus" rel="noreferrer" target="_blank">https://www.avast.com/antivirus</a><br>
<br>
<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit<br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to<br>
the bottom of the page. Enter your email address and press the "Unsubscribe<br>
or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email<br>
confirmation. If you have trouble unsubscribing, please send a message to<br>
the list detailing the problem.<br>
<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.<br>
</blockquote></div><br></div>