<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<div class="moz-cite-prefix">Skyler, Short answer is No!<br>
<br>
My experience with the sound fobs that look similar to yours , You
will still need to solder to Pin 13 to get the PTT logic. No way
around that as on the CM-108 chip Pin 13 is not connected to
anything so no place else to get that logic other than soldering a
wire to the pin.<br>
<br>
As for the COS signal (CM-108 Pin 48) that can be gotten from the
left side of the volume down switch SW1 if you want to avoid
soldering the COS line to Pin 48 on the sound chip. CTCSS can be
retrieved from the right side of volume up SW2<br>
<br>
The Green LED is still the heartbeat indicator. <br>
The Red Led on the Fob is <b>NOT</b> the same as the PTT LED
indicated on the modification schematic.<br>
<br>
In fact if you go here <a
href="http://www.crompton.com/hamradio/usb_fob_modification/"><a class="moz-txt-link-freetext" href="http://www.crompton.com/hamradio/usb_fob_modification/">http://www.crompton.com/hamradio/usb_fob_modification/</a></a><br>
<br>
You will find a good description of the connections on that
particular fob.<br>
<br>
Larry - N7FM<br>
<br>
<br>
<br>
On 10/12/2015 06:23 PM, Skyler Fennell wrote:<br>
</div>
<blockquote
cite="mid:48C3D488-4399-4727-9AE8-337EB8FA112D@gmail.com"
type="cite">
<pre wrap="">I previously got the CM108 sound fob from startech and had to solder to the tiny pin.
With this one
<a class="moz-txt-link-freetext" href="http://ebay.com/itm/291156304476?_mwBanner=1&varId=590306532025">http://ebay.com/itm/291156304476?_mwBanner=1&varId=590306532025</a>
It looks like it already has both LED's installed. I am assuming the red led is the same as the transmit LED.
If this is so, does that mean I don't have to solder to the tiny pin on the CM108 and I can just drive a transistor with the same wire as the LED for PTT?
Skyler KD0WHB
_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>
<a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
To unsubscribe from this list please visit <a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
</pre>
</blockquote>
<br>
</body>
</html>