<div dir="ltr">I'm curious as to why allmon would be an issue? I'm running 2 allmon servers which monitor up to 12 nodes with 5 remote bases and have not had issues. What is the problem that allmon causes?<div><br></div><div>de K0JSC</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Sat, Dec 12, 2015 at 12:41 PM, Kenneth Grimard <span dir="ltr"><<a href="mailto:n1dot1@gmail.com" target="_blank">n1dot1@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">allmon and allmon2 will cause an issue. if you do not use them you will not<br>
have the problem steve. it can be made to cause a crash every time<br>
when used.<br>
<br>
this is why i have taken the remote base node off the allmon2 page's<br>
on dial. and will have to do the same for the acid build also.<br>
<br>
i am working with dial to make the migration to new<br>
hardware sooner or later.<br>
<br>
ken n1dot<br>
<br>
<br>
<br>
On 12/12/2015 2:25 PM, Steve Zingman wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
I don't have any stability issues with the 706 and the basic rpt remote base code.<br>
I don't need hamlib. Admittedly, I don't use Aallmon in it. I'll have to try it.<br>
<br>
YMMV<br>
<br>
73, Steve N4IRS<br>
<br>
<br>
On 12/12/2015 02:20 PM, David McGough wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hi Ken,<br>
<br>
Interesting that having allmon2 probe the RB stats causes a Asterisk<br>
crash...Back in yesteryear I tried to run a 706mkiig RB using the built-in<br>
code and never had good results--YES, it did work. But, Asterisk wasn't<br>
stable very long, frequently crashing several times a day, depending on<br>
use. Various serial communications issues with the radio would<br>
-sporadically- "knock it for a loop" too. I concluded that their was<br>
probably memory getting clobbered somewhere.<br>
<br>
If I disabled the RB command support, the Asterisk stability<br>
skyrocketed--uptimes now measured in weeks, months or longer. As an<br>
example, here are the stats from one of my RB systems now:<br>
<br>
TX time today....................................: 01:12:27.95<br>
TX time since system initialization..............: 87:37:42.861<br>
Uptime...........................................: 1336:34:22<br>
<br>
It has been up 55 days without any issues....And, as you can see, it gets<br>
used--But, I now use hamlib for all RB commands.<br>
<br>
<br>
73, David KB4FXC<br>
<br>
<br>
On Sat, 12 Dec 2015, Kenneth Grimard wrote:<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
the crash is caused when accessing the the remote base node<br>
using the asterisk manager interface via allmon2<br>
by the way.<br>
<br>
ken n1dot<br>
<br>
On 12/12/2015 2:02 PM, Steve Zingman wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Ken,<br>
I now better understand. I'll work on something that will solve the<br>
restart from crash.<br>
I will also look into what is causing the crash since I also have a<br>
706 as a remote base.<br>
<br>
Thanks, Steve<br>
<br>
On 12/12/2015 01:50 PM, Kenneth Grimard wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
hi steve<br>
<br>
the main issue steve is not the fact that<br>
service asterisk restart does not work.<br>
<br>
but the main issue is that if asterisk crashes for any reason<br>
it will not restart itself. because of this i also can not use<br>
cop,1 cop command which is asterisk restart.<br>
<br>
cop,1 will cause asterisk to exit for restart but asterisk will<br>
not restart via a watchdog script.<br>
<br>
safe_asterisk used to do this very nicely but it has been eliminated.<br>
and you only use the asterisk service script under systemd.<br>
<br>
yes the version of the asterisk service script i have here from the<br>
dial build from about 4 to 5 weeks ago the<br>
service asterisk restart does not work.<br>
<br>
it force's me to use service asterisk stop to remove the<br>
asterisk.ctl file from the /var/run and the<br>
the service asterisk start will then work allowing asterisk<br>
to be restarted proprely.<br>
<br>
I also have a node setup for remote base mode using an<br>
ic-706mkiig and sometimes that will cause a crash with it.<br>
when asterisk is accessed via an allmon2 dashboard.<br>
<br>
I have had to take the remote base node off of the<br>
allmon2 page to stop this crashing.<br>
<br>
it will do it every time too.<br>
that is something with the old remote base code<br>
with in app_rpt.c too which has never been fixed.<br>
<br>
this is why the asterisk auto restart on crash would be very nice<br>
<br>
where can i find a new or updated asterisk service script.<br>
<br>
can i get it from the rpi2 dial image and put in the<br>
dial x86 build with out having to re-install<br>
dial x86 image?<br>
<br>
otherwise for the most part asterisk under dial has been<br>
fairly stable. but i can make it crash under certain conditions<br>
which i try to avoid. like using allmon2 to access<br>
the remote base node via the asterisk manager<br>
interface.<br>
<br>
ken n1dot<br>
<br>
<br>
<br>
On 12/12/2015 1:01 PM, Steve Zingman wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Ken,<br>
As I posted below I could not recreate your issue. is there anything<br>
I'm missing?<br>
<br>
73, Steve<br>
<br>
root@repeater:~# asterisk -r<br>
Asterisk 1519, Copyright (C) 1999 - 2008 Digium, Inc. and others.<br>
Created by Mark Spencer <<a href="mailto:markster@digium.com" target="_blank">markster@digium.com</a>><br>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show<br>
warranty' for details.<br>
This is free software, with components licensed under the GNU<br>
General Public<br>
License version 2 and other licenses; you are welcome to<br>
redistribute it under<br>
certain conditions. Type 'core show license' for details.<br>
========================================================================= <br>
Connected to Asterisk 1519 currently running on repeater (pid = 4407)<br>
repeater*CLI> rpt cmd 2150 cop 1 2150<br>
repeater*CLI> Killed<br>
<br>
root@repeater:~# service asterisk restart<br>
root@repeater:~# asterisk -r<br>
Asterisk 1519, Copyright (C) 1999 - 2008 Digium, Inc. and others.<br>
Created by Mark Spencer <<a href="mailto:markster@digium.com" target="_blank">markster@digium.com</a>><br>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show<br>
warranty' for details.<br>
This is free software, with components licensed under the GNU<br>
General Public<br>
License version 2 and other licenses; you are welcome to<br>
redistribute it under<br>
certain conditions. Type 'core show license' for details.<br>
========================================================================= <br>
Connected to Asterisk 1519 currently running on repeater (pid = 4462)<br>
repeater*CLI><br>
<br>
<br>
<br>
On 12/12/2015 11:50 AM, Kenneth Grimard wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
I download the dial release and installed it just after is first<br>
came out<br>
that was about 4 weeks ago.<br>
<br>
now if asterisk crash for any reason or if you use the cop,1 cop<br>
command<br>
it will not restart is self at all. you have to go into an ssh<br>
shell and issue a<br>
service asterisk stop then a service asterisk start.<br>
<br>
the service asterisk restart does not work for me on the x86 release.<br>
<br>
there seems to be no way for asterisk to restart itself after a crash<br>
or after using the cop,1 cop command.<br>
<br>
has there been any updates to the asterisk service command<br>
for systemd to fix this?<br>
<br>
ken n1dot<br>
<br>
<br>
<br>
On 12/12/2015 7:16 AM, Steve Zingman wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Neil,<br>
I misread your message last night.<br>
I just tested service asterisk restart on DIAL x86 restarts a dead<br>
asterisk. See below.<br>
<br>
root@repeater:/etc/init.d# ps ax | grep asterisk<br>
1081 ? Ssl 0:01 /usr/sbin/asterisk<br>
1117 pts/0 S+ 0:00 grep asterisk<br>
<br>
root@repeater:/etc/init.d# kill -9 1081<br>
<br>
root@repeater:/etc/init.d# ps ax | grep asterisk<br>
1125 pts/0 S+ 0:00 grep asterisk<br>
<br>
root@repeater:/etc/init.d# asterisk -r<br>
Asterisk 1519, Copyright (C) 1999 - 2008 Digium, Inc. and others.<br>
Created by Mark Spencer <<a href="mailto:markster@digium.com" target="_blank">markster@digium.com</a>><br>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show<br>
warranty' for details.<br>
This is free software, with components licensed under the GNU<br>
General Public<br>
License version 2 and other licenses; you are welcome to<br>
redistribute it under<br>
certain conditions. Type 'core show license' for details.<br>
========================================================================= <br>
Unable to connect to remote asterisk (does /var/run/asterisk.ctl<br>
exist?)<br>
<br>
root@repeater:/etc/init.d# service asterisk restart<br>
<br>
root@repeater:/etc/init.d# ps ax | grep asterisk<br>
1143 ? Ssl 0:00 /usr/sbin/asterisk<br>
1171 pts/0 S+ 0:00 grep asterisk<br>
<br>
root@repeater:/etc/init.d# asterisk -r<br>
Asterisk 1519, Copyright (C) 1999 - 2008 Digium, Inc. and others.<br>
Created by Mark Spencer <<a href="mailto:markster@digium.com" target="_blank">markster@digium.com</a>><br>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show<br>
warranty' for details.<br>
This is free software, with components licensed under the GNU<br>
General Public<br>
License version 2 and other licenses; you are welcome to<br>
redistribute it under<br>
certain conditions. Type 'core show license' for details.<br>
========================================================================= <br>
Connected to Asterisk 1519 currently running on repeater (pid = 1143)<br>
repeater*CLI><br>
<br>
73, Steve N4IRS<br>
<br>
On 12/12/2015 12:44 AM, Neil k8it wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Steve<br>
I have been evaluating Dial on a Linux PC<br>
Observations<br>
1. When asterisk crashes, there is no restart or watchdog<br>
2.this makes debugging very difficult<br>
3.asterisk service mode restart does not seem to work<br>
4. in this mode remote SSH to restart is not possible<br>
Do you have any fixes planned?<br>
Thanks<br>
73 Neil Sablatzky K8IT<br>
Allstar Node 41838 KITLINK<br>
Allstar Node 42087 KITLINK HUB<br>
IRLP Node exp0068<br>
Echolink K8IT-L<br>
WIRES-X K8IT 11479 Room 21479<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
_______________________________________________<br>
.<br>
</blockquote></blockquote></blockquote></blockquote></blockquote></blockquote></blockquote>
-- <br>
"Anything is possible if you don't know what you are talking about."<br>
1st Law of Logic<br>
<br>
<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visithttp://<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.<br>
</blockquote>
<<a href="https://www.avast.com/?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" rel="noreferrer" target="_blank">https://www.avast.com/?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient</a>> <br>
This email has been sent from a virus-free computer protected by<br>
Avast.<br>
<a href="http://www.avast.com" rel="noreferrer" target="_blank">www.avast.com</a><br>
<<a href="https://www.avast.com/?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" rel="noreferrer" target="_blank">https://www.avast.com/?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient</a>> <br>
<br>
<br>
<br>
<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visithttp://<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.<br>
</blockquote>
-- <br>
"Anything is possible if you don't know what you are talking about."<br>
1st Law of Logic<br>
</blockquote>
<<a href="https://www.avast.com/?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" rel="noreferrer" target="_blank">https://www.avast.com/?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient</a>> <br>
This email has been sent from a virus-free computer protected by Avast.<br>
<a href="http://www.avast.com" rel="noreferrer" target="_blank">www.avast.com</a><br>
<<a href="https://www.avast.com/?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" rel="noreferrer" target="_blank">https://www.avast.com/?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient</a>> <br>
<br>
<br>
</blockquote>
-- <br>
"Anything is possible if you don't know what you are talking about."<br>
1st Law of Logic<br>
</blockquote>
<br>
<br>
---<br>
This email has been checked for viruses by Avast antivirus software.<br>
<a href="https://www.avast.com/antivirus" rel="noreferrer" target="_blank">https://www.avast.com/antivirus</a><br>
<br>
</blockquote>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.<br>
</blockquote>
<br>
</blockquote>
<br>
<br>
---<br>
This email has been checked for viruses by Avast antivirus software.<br>
<a href="https://www.avast.com/antivirus" rel="noreferrer" target="_blank">https://www.avast.com/antivirus</a><br>
<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </blockquote></div><br></div>