<div dir="ltr">@KK6ECM, I am aware of the hardware differences and have reviewed schematics. It is the software side I am having issues with. <div><br></div><div>@N4IRS, Thanks. I will try this and report back. </div><div><br></div><div>-NM1B</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Jan 11, 2016 at 2:48 PM, kk6ecm <span dir="ltr"><<a href="mailto:kk6ecm@gmail.com" target="_blank">kk6ecm@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="auto"><div>See the schematics and documentation at <a href="http://dmkeng.com/Products.htm" target="_blank">http://dmkeng.com/Products.htm</a><br><br>Sent from my iPhone</div><div><div class="h5"><div><br>On Jan 11, 2016, at 10:35 AM, Steve Zingman <<a href="mailto:szingman@msgstor.com" target="_blank">szingman@msgstor.com</a>> wrote:<br><br></div><blockquote type="cite"><div>
Matt,<br>
I've tested DIAL with both the URI and the URIx. All of my running
nodes that are USB are on the URI. You might try the URI diag. You
will need to build the loopback.
<a href="http://docs.allstarlink.org/drupal/node/143" target="_blank"><http://docs.allstarlink.org/drupal/node/143></a><br>
You will also need the software
<a href="http://svn.ohnosec.org/viewvc/projects/allstar/uridiag/trunk/?root=svn" target="_blank"><http://svn.ohnosec.org/viewvc/projects/allstar/uridiag/trunk/?root=svn></a>
I should have included it with DIAL.<br>
<br>
If you need help with the software, I'll be happy to help.<br>
<br>
73, Steve N4IRS<br>
<br>
<div>On 1/11/2016 11:02 AM, Matt Brennan
wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">Good Day,
<div><br>
</div>
<div> I am helping work on a machine that I setup with ACID
about 7 years ago. The machine that ACID was running on died a
few days ago, and we are trying to replace it with a new
machine running DIAL. </div>
<div><br>
</div>
<div> We got the machine setup without issue, however we are
having issues getting DIAL to use the URI (note, this is a
URI, not a URIx). We can get audio from Asterisk into the
repeater, however we don't seem to get any audio or COR back
from the repeater. The device was 100% working before the
machine failed. </div>
<div><br>
</div>
<div> As a test, we connected a URIx that we had for another
project and that worked without issue. We're assuming there's
a difference in the URI from the URIx (I know it's CM108 vs
CM119) and the way Asterisk / App_rpt interacts with it. </div>
<div><br>
</div>
<div> Anyone able to help with what we need to change to get
this working? </div>
<div><br>
</div>
<div>73 and thanks,</div>
<div>Matt, NM1B</div>
</div>
<br>
<fieldset></fieldset>
<br>
<pre>_______________________________________________
App_rpt-users mailing list
<a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </pre>
</blockquote>
<br>
</div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>App_rpt-users mailing list</span><br><span><a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a></span><br><span><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br><span></span><br><span>To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"</span><br><span>You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </span></div></blockquote></div></div></div></blockquote></div><br></div>