<div dir="ltr">Hi All,<div><br></div><div>I'm attempting to get an RTCM and Trimble Thunderbolt E to talk. I'm using TSIP for the connection. </div><div><br></div><div>Using debug level 14 I see "GPS Receiver Active, waiting for acquisition"</div><div><br></div><div>Using debug level of 40 I can see packets coming in "DEBUG: TSIP: ok, 0, 9 - 14: 00 00 04 00 00 00</div><div><br></div><div>When I use Trimbles software "TrimbleStudio" I can see that the GPS's mode is "3-D, Auto"; its Status is "doing  position fixes"; its Almanac is "complete & current". I can see the Lat/Lon and Altitude updating, and 6 satellites are being used for a position fix. It's in monitor mode TSIP 9600 8N1.</div><div><br></div><div>I can't figure out why the Trimble software says everything is good, but the RTCM says the GPS is waiting for acquisition.</div><div><br></div><div>Any ideas? Is there a debug level in the RTCM that might provide more information?</div><div><br></div><div>Thanks,</div><div><br>Jesse</div><div><br></div><div><br></div></div>