<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>0 0 0 0 on the pins is ch 1 so you get 16 channels with 4 bits, theres no way to program a M216 to power up on ch 1 in the RSS. Home revert is a later feature in the CM & CDM series and you need to use the ignition sense to turn those on/off to reliably get it to work. Sometimes it works by resetting power, but I've had problems in some vehicles if it gets in a brown out condition on boot (engine crank). </div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">If you program one pin to "channel steer 1" (LSB) and momentarily pull it low the radio should go to channel one. </div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">If you want to steer up to 8 channels then you need 3 bits and pull all 3 to ground momentarily after bootup. Externally a time delayed one shot relay would do it, use diodes to isolate each input. </div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature"><br><div>Jesse</div></div><div><br>On Apr 13, 2016, at 9:04 AM, Jeff Carrier <<a href="mailto:k0jsc.jeff@gmail.com">k0jsc.jeff@gmail.com</a>> wrote:<br><br></div><blockquote type="cite"><div><div dir="ltr">Skyler, <div><br></div><div>Channel steering should give you 15 channels using 4 pins for steering. I know the CDM and the GM300's work this way.</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Apr 13, 2016 at 10:00 AM, <span dir="ltr"><<a href="mailto:app_rpt-users-request@ohnosec.org" target="_blank">app_rpt-users-request@ohnosec.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Send App_rpt-users mailing list submissions to<br>
<a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:app_rpt-users-request@ohnosec.org">app_rpt-users-request@ohnosec.org</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:app_rpt-users-owner@ohnosec.org">app_rpt-users-owner@ohnosec.org</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of App_rpt-users digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. Reset to channel 1 on radius (Skyler F)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Tue, 12 Apr 2016 22:30:23 -0600<br>
From: Skyler F <<a href="mailto:electricity440@gmail.com">electricity440@gmail.com</a>><br>
To: "<a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a>" <<a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a>><br>
Subject: [App_rpt-users] Reset to channel 1 on radius<br>
Message-ID:<br>
<CAJNyT08s-8MODP=<a href="mailto:r2gVFykAJ8F9NFycWd9OmrgpYnLensR6-gQ@mail.gmail.com">r2gVFykAJ8F9NFycWd9OmrgpYnLensR6-gQ@mail.gmail.com</a>><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
AllStar Remote base wise, I am using some radius radios (m216 for VHF,<br>
SM120 UHF). The VHF one does have Channel steer option on the software, but<br>
I don't get to use every channel that the radio has :( only 8 instead of<br>
16. With the amount of repeaters here in Denver , I need as many channels<br>
as I can get!<br>
<br>
I can easily simulate key presses, but I would like a reliable way to reset<br>
the channel back to original state. These radius radios remember the<br>
channel they were on after a power cycle (unfortunately, in my case). Is<br>
there any way to force it to go back to channel one?<br>
<br>
73,<br>
Skyler KD?WHB<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://ohnosec.org/pipermail/app_rpt-users/attachments/20160412/2a9381ee/attachment-0001.html" rel="noreferrer" target="_blank">http://ohnosec.org/pipermail/app_rpt-users/attachments/20160412/2a9381ee/attachment-0001.html</a>><br>
<br>
------------------------------<br>
<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
<br>
End of App_rpt-users Digest, Vol 86, Issue 42<br>
*********************************************<br>
</blockquote></div><br></div>
</div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>App_rpt-users mailing list</span><br><span><a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a></span><br><span><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br><span></span><br><span>To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"</span><br><span>You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </span></div></blockquote></body></html>