<p dir="ltr">Probably dated but in the words of the General on the original movie Wargames.... </p>
<p dir="ltr">"I would pxxs on a spark plug if I thought it would help. "<br><br><br></p>
<p dir="ltr">" computers only do what they are instructed to do. We just need to figure out what it was we said. "</p>
<div class="gmail_quote">On May 21, 2016 18:59, <<a href="mailto:app_rpt-users-request@ohnosec.org">app_rpt-users-request@ohnosec.org</a>> wrote:<br type="attribution"><blockquote class="quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Send App_rpt-users mailing list submissions to<br>
<a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:app_rpt-users-request@ohnosec.org">app_rpt-users-request@ohnosec.org</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:app_rpt-users-owner@ohnosec.org">app_rpt-users-owner@ohnosec.org</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of App_rpt-users digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. Re: . usbradio_tune_xxxxx.conf where .conf = .confusion<br>
(Steve Agee (David McGough)<br>
2. Re: . usbradio_tune_xxxxx.conf where .conf = .confusion<br>
(Steve Agee (Steve Agee)<br>
3. Re: Voter RTCM sometimes offline-mode but not when there is a<br>
telnet connection (Chuck Henderson)<br>
4. Re: . usbradio_tune_xxxxx.conf where .conf = .confusion<br>
(Steve Agee (David McGough)<br>
5. Re: . usbradio_tune_xxxxx.conf where .conf = .confusion<br>
(Steve Agee (Steve Agee)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Sat, 21 May 2016 18:13:00 -0400 (EDT)<br>
From: David McGough <<a href="mailto:kb4fxc@inttek.net">kb4fxc@inttek.net</a>><br>
To: <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
Subject: Re: [App_rpt-users] . usbradio_tune_xxxxx.conf where .conf =<br>
.confusion (Steve Agee<br>
Message-ID:<br>
<<a href="mailto:Pine.LNX.4.44.1605211807150.17143-100000@goliath.inttek.net">Pine.LNX.4.44.1605211807150.17143-100000@goliath.inttek.net</a>><br>
Content-Type: TEXT/PLAIN; charset=US-ASCII<br>
<br>
<br>
For any of the AllStar releases:<br>
<br>
Launch Asterisk from the command prompt.<br>
<br>
asterisk> radio active usb<br>
asterisk> radio tune save<br>
<br>
If two URI's are attached, perform:<br>
<br>
asterisk> radio active usb1<br>
asterisk> radio tune save<br>
<br>
If three URI's are attached, perform:<br>
<br>
asterisk> radio active usb2<br>
asterisk> radio tune save<br>
<br>
...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with<br>
what the AllStar software interprets the various devstr parameters to be.<br>
<br>
asterisk> exit<br>
<br>
<br>
<br>
<br>
On Sat, 21 May 2016, Steve Agee wrote:<br>
<br>
> Thanks, but as previously mentioned, this is DIAL and so your CLI<br>
> commands from XIPAR do not exist.<br>
><br>
> N5ZUA<br>
><br>
<br>
<br>
<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Sat, 21 May 2016 17:15:13 -0500<br>
From: Steve Agee <<a href="mailto:n5zua@earthlink.net">n5zua@earthlink.net</a>><br>
To: <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
Subject: Re: [App_rpt-users] . usbradio_tune_xxxxx.conf where .conf =<br>
.confusion (Steve Agee<br>
Message-ID: <<a href="mailto:806c3361-90f7-64cb-9533-173f12638871@earthlink.net">806c3361-90f7-64cb-9533-173f12638871@earthlink.net</a>><br>
Content-Type: text/plain; charset="windows-1252"; Format="flowed"<br>
<br>
Yes, and this works if everything is USBRADIO. But remember, one is<br>
USBRADIO and one is SIMPLEUSB. Ah, now the fun begins.<br>
<br>
N5ZUA<br>
<br>
On 5/21/2016 5:13 PM, David McGough wrote:<br>
> For any of the AllStar releases:<br>
><br>
> Launch Asterisk from the command prompt.<br>
><br>
> asterisk> radio active usb<br>
> asterisk> radio tune save<br>
><br>
> If two URI's are attached, perform:<br>
><br>
> asterisk> radio active usb1<br>
> asterisk> radio tune save<br>
><br>
> If three URI's are attached, perform:<br>
><br>
> asterisk> radio active usb2<br>
> asterisk> radio tune save<br>
><br>
> ...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with<br>
> what the AllStar software interprets the various devstr parameters to be.<br>
><br>
> asterisk> exit<br>
><br>
><br>
><br>
><br>
> On Sat, 21 May 2016, Steve Agee wrote:<br>
><br>
>> Thanks, but as previously mentioned, this is DIAL and so your CLI<br>
>> commands from XIPAR do not exist.<br>
>><br>
>> N5ZUA<br>
>><br>
> _______________________________________________<br>
> App_rpt-users mailing list<br>
> <a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
> <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
><br>
> To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.<br>
><br>
<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/ec5f12e1/attachment-0001.html" rel="noreferrer" target="_blank">http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/ec5f12e1/attachment-0001.html</a>><br>
<br>
------------------------------<br>
<br>
Message: 3<br>
Date: Sat, 21 May 2016 17:19:51 -0500<br>
From: Chuck Henderson <<a href="mailto:rpt2@chuck.midlandsnetworking.com">rpt2@chuck.midlandsnetworking.com</a>><br>
To: "<a href="mailto:info@rainerbertsch.de">info@rainerbertsch.de</a>" <<a href="mailto:info@rainerbertsch.de">info@rainerbertsch.de</a>><br>
Cc: app_rpt mailing list <<a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a>><br>
Subject: Re: [App_rpt-users] Voter RTCM sometimes offline-mode but not<br>
when there is a telnet connection<br>
Message-ID:<br>
<CADEYVwgyt447eaOCmEZxsyGxaXy-0rRDv2m=<a href="mailto:CR8YwraehHM8fQ@mail.gmail.com">CR8YwraehHM8fQ@mail.gmail.com</a>><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Is the RTCM and the server on the same Ethernet LAN at the same location?<br>
Are you using an Ethernet switch or a hub?<br>
If you are using a switch then why are you not running everything full<br>
duplex?<br>
<br>
On Sat, May 21, 2016 at 3:02 PM, <a href="mailto:info@rainerbertsch.de">info@rainerbertsch.de</a> <<br>
<a href="mailto:info@rainerbertsch.de">info@rainerbertsch.de</a>> wrote:<br>
<br>
> Hi there,<br>
><br>
> Since November, we are trying to build a voting system.<br>
> We need some help please !<br>
><br>
> Hardware:<br>
> Supermicro Intel Atom D525 (we also tried a RaspberryPi and an other<br>
> computer)<br>
> Software: Since yesterday DIAL from Alllstar-Homepage (Before we tried it<br>
> with ACID)<br>
> RTCM from Micro Node, Mark, we have 4 of them and tried all of them<br>
> Garmin GPS 18x LVC, also wie tried 4 of them.<br>
><br>
> Error:<br>
> More or less often the RTCM switch in the offline mode. When there is<br>
> traffic very often.<br>
> But not if at the same time there is a telnet connection from any computer<br>
> to the RTCM.<br>
><br>
> We suspect a networking problem between our asterisk-server and RTCM<br>
> Network-Card is set to 10 MB / s half-duplex like in the RTCM.<br>
><br>
> From tcpdump from server to rtcm we got:<br>
><br>
> ??? snip ----------<br>
><br>
> GPSTime (cli0_yy): 05/05/16 12:48:01.000000000<br>
> SysTime: 05/05/16 12:48:01.040000<br>
> DrainTime: 05/05/16 12:48:01.000<br>
> Got GPS (cli0_yy): Lat: 4857.60N, Lon: 00915.01E, Elev: 214.4<br>
> sending KEEPALIVE (GPS) packet to client cli2_bprx digest bbb4c643<br>
> GPSTime (cli2_bprx): 05/05/16 12:48:01.000000000<br>
> SysTime: 05/05/16 12:48:01.300000<br>
> DrainTime: 05/05/16 12:48:01.240<br>
> Got GPS (cli2_bprx): Lat: 4853.16N, Lon: 00912.65E, Elev: 317.2<br>
> sending KEEPALIVE (GPS) packet to client cli0_yy digest 79d9c77d<br>
> GPSTime (cli0_yy): 05/05/16 12:48:02.000000000<br>
> SysTime: 05/05/16 12:48:02.040000<br>
> DrainTime: 05/05/16 12:48:02.000<br>
> Got GPS (cli0_yy): Lat: 4857.60N, Lon: 00915.01E, Elev: 214.4<br>
> sending KEEPALIVE (GPS) packet to client cli2_bprx digest bbb4c643<br>
> [May 512:48:03]NOTICE[6559]:chan_voter.c:3632voter_reader:Voter<br>
><br>
> *lost master timing source!!*<br>
><br>
> sending packet challenge 200371797 digest 7749985d password BLAH sending<br>
> packet challenge 200371797 digest 7749985d password BLAH sending packet<br>
> challenge 200371797 digest bbb4c643 password BLAH GPSTime (cli2_bprx):<br>
> 05/05/16 12:48:18.000000000<br>
><br>
> SysTime: 05/05/16 12:48:18.320000<br>
> DrainTime: 01/01/70 01:00:00.340<br>
> Got GPS (cli2_bprx): Lat: 4853.16N, Lon: 00912.65E, Elev: 317.2<br>
><br>
> -- Voter client cli0_yy disconnect (timeout)<br>
><br>
> sending KEEPALIVE (GPS) packet to client cli2_bprx digest bbb4c643<br>
><br>
> ??? snip ----------<br>
><br>
> Konfiguration of the Ethernet-Card<br>
><br>
> # ethtool eth0<br>
> Settings for eth0:<br>
> Supported ports: [TP]<br>
> Supported link modes: 10baseT / Half 10baseT / Full<br>
> 100baseT / Half 100baseT / Full<br>
> 1000baseT / Full<br>
> Supported break frame use: No<br>
> Supports auto-negotiation: Yes<br>
> Advertised link modes: Not reported<br>
> Advertised break frame use: No<br>
> Advertised auto-negotiation: No<br>
> Speed: 10Mb / s<br>
> Duplex: Half<br>
> Port: Twisted Pair<br>
> PHYAD: 1<br>
> Transceiver: internal<br>
> Auto-negotiation: off<br>
> MDI-X: off (auto)<br>
> Supports Wake-on: pumbg<br>
> Wake-on: g<br>
> Current message level: 0x00000007 (7)<br>
> drv sample link<br>
><br>
> Does anyone have an idea what it may be ?<br>
> Why there is no problem with telnet at the same time and how can we run<br>
> the system without this workaround<br>
><br>
> --<br>
> Rainer BertschDF3SY<br>
><br>
><br>
><br>
> _______________________________________________<br>
> App_rpt-users mailing list<br>
> <a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
> <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
><br>
> To unsubscribe from this list please visit<br>
> <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down<br>
> to the bottom of the page. Enter your email address and press the<br>
> "Unsubscribe or edit options button"<br>
> You do not need a password to unsubscribe, you can do it via email<br>
> confirmation. If you have trouble unsubscribing, please send a message to<br>
> the list detailing the problem.<br>
><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/b0d95d6d/attachment-0001.html" rel="noreferrer" target="_blank">http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/b0d95d6d/attachment-0001.html</a>><br>
<br>
------------------------------<br>
<br>
Message: 4<br>
Date: Sat, 21 May 2016 18:28:04 -0400 (EDT)<br>
From: David McGough <<a href="mailto:kb4fxc@inttek.net">kb4fxc@inttek.net</a>><br>
To: <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
Subject: Re: [App_rpt-users] . usbradio_tune_xxxxx.conf where .conf =<br>
.confusion (Steve Agee<br>
Message-ID:<br>
<<a href="mailto:Pine.LNX.4.44.1605211827420.17143-100000@goliath.inttek.net">Pine.LNX.4.44.1605211827420.17143-100000@goliath.inttek.net</a>><br>
Content-Type: TEXT/PLAIN; charset=US-ASCII<br>
<br>
<br>
For simpleusb, replace the word "radio" with "susb" ...Like:<br>
<br>
asterisk> susb active usb<br>
asterisk> susb tune save<br>
<br>
And, the written config files will be like: simpleusb_tune_xxxx.conf<br>
<br>
<br>
<br>
On Sat, 21 May 2016, Steve Agee wrote:<br>
<br>
> Yes, and this works if everything is USBRADIO. But remember, one is<br>
> USBRADIO and one is SIMPLEUSB. Ah, now the fun begins.<br>
><br>
> N5ZUA<br>
><br>
> On 5/21/2016 5:13 PM, David McGough wrote:<br>
> > For any of the AllStar releases:<br>
> ><br>
> > Launch Asterisk from the command prompt.<br>
> ><br>
> > asterisk> radio active usb<br>
> > asterisk> radio tune save<br>
> ><br>
> > If two URI's are attached, perform:<br>
> ><br>
> > asterisk> radio active usb1<br>
> > asterisk> radio tune save<br>
> ><br>
> > If three URI's are attached, perform:<br>
> ><br>
> > asterisk> radio active usb2<br>
> > asterisk> radio tune save<br>
> ><br>
> > ...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with<br>
> > what the AllStar software interprets the various devstr parameters to be.<br>
> ><br>
> > asterisk> exit<br>
> ><br>
> ><br>
<br>
<br>
<br>
------------------------------<br>
<br>
Message: 5<br>
Date: Sat, 21 May 2016 17:59:21 -0500<br>
From: Steve Agee <<a href="mailto:n5zua@earthlink.net">n5zua@earthlink.net</a>><br>
To: <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
Subject: Re: [App_rpt-users] . usbradio_tune_xxxxx.conf where .conf =<br>
.confusion (Steve Agee<br>
Message-ID: <<a href="mailto:0698c9c8-f1c0-6c47-8b7d-6e6735d59fa8@earthlink.net">0698c9c8-f1c0-6c47-8b7d-6e6735d59fa8@earthlink.net</a>><br>
Content-Type: text/plain; charset="windows-1252"; Format="flowed"<br>
<br>
Yes, and already "been there, done that" but the light on the second<br>
URIx stays solid.<br>
<br>
N5ZUA<br>
<br>
On 5/21/2016 5:28 PM, David McGough wrote:<br>
> For simpleusb, replace the word "radio" with "susb" ...Like:<br>
><br>
> asterisk> susb active usb<br>
> asterisk> susb tune save<br>
><br>
> And, the written config files will be like: simpleusb_tune_xxxx.conf<br>
><br>
><br>
><br>
> On Sat, 21 May 2016, Steve Agee wrote:<br>
><br>
>> Yes, and this works if everything is USBRADIO. But remember, one is<br>
>> USBRADIO and one is SIMPLEUSB. Ah, now the fun begins.<br>
>><br>
>> N5ZUA<br>
>><br>
>> On 5/21/2016 5:13 PM, David McGough wrote:<br>
>>> For any of the AllStar releases:<br>
>>><br>
>>> Launch Asterisk from the command prompt.<br>
>>><br>
>>> asterisk> radio active usb<br>
>>> asterisk> radio tune save<br>
>>><br>
>>> If two URI's are attached, perform:<br>
>>><br>
>>> asterisk> radio active usb1<br>
>>> asterisk> radio tune save<br>
>>><br>
>>> If three URI's are attached, perform:<br>
>>><br>
>>> asterisk> radio active usb2<br>
>>> asterisk> radio tune save<br>
>>><br>
>>> ...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with<br>
>>> what the AllStar software interprets the various devstr parameters to be.<br>
>>><br>
>>> asterisk> exit<br>
>>><br>
>>><br>
> _______________________________________________<br>
> App_rpt-users mailing list<br>
> <a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
> <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
><br>
> To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.<br>
><br>
<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/037416ce/attachment.html" rel="noreferrer" target="_blank">http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/037416ce/attachment.html</a>><br>
<br>
------------------------------<br>
<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
<br>
End of App_rpt-users Digest, Vol 87, Issue 38<br>
*********************************************<br>
</blockquote></div>