<p dir="ltr">If you are using Xipar then under the CLI use:</p>
<p dir="ltr">radio probe on</p>
<p dir="ltr">It will scan all currently connected Fobs and indicate bus and device number. </p>
<p dir="ltr">radio probe off</p>
<p dir="ltr">will stop the scan. </p>
<p dir="ltr">Edit the urd.conf file to set device parameters accordingly. </p>
<p dir="ltr">Restart Asterisk </p>
<div class="gmail_quote">On May 21, 2016 17:08, <<a href="mailto:app_rpt-users-request@ohnosec.org">app_rpt-users-request@ohnosec.org</a>> wrote:<br type="attribution"><blockquote class="quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Send App_rpt-users mailing list submissions to<br>
<a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:app_rpt-users-request@ohnosec.org">app_rpt-users-request@ohnosec.org</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:app_rpt-users-owner@ohnosec.org">app_rpt-users-owner@ohnosec.org</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of App_rpt-users digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee)<br>
2. Voter RTCM sometimes offline-mode but not when there is a<br>
telnet connection (<a href="mailto:info@rainerbertsch.de">info@rainerbertsch.de</a>)<br>
3. Re: usbradio_tune_xxxxx.conf where .conf = .confusion (kk6ecm)<br>
4. Re: usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Sat, 21 May 2016 14:04:56 -0500<br>
From: Steve Agee <<a href="mailto:n5zua@earthlink.net">n5zua@earthlink.net</a>><br>
To: <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
Subject: [App_rpt-users] usbradio_tune_xxxxx.conf where .conf =<br>
.confusion<br>
Message-ID: <<a href="mailto:c5dc4bf0-2c2c-3566-f32e-31a311653463@earthlink.net">c5dc4bf0-2c2c-3566-f32e-31a311653463@earthlink.net</a>><br>
Content-Type: text/plain; charset="windows-1252"; Format="flowed"<br>
<br>
Hello list:<br>
<br>
I've searched<br>
<br>
<<a href="http://www.xelatec.com/xipar/node/180" rel="noreferrer" target="_blank">http://www.xelatec.com/xipar/node/180</a>><br>
<br>
and I fully understand the description/explanations given. What I don't<br>
understand, with specific attention to the lines:<br>
<br>
|; name=usb ;<br>
; devnum=1 ;<br>
devstr=4-2 ;<br>
<br>
is how to manually uncomment, and manipulate them. In this particular<br>
instance, I'm trying to get a DIAL box running with one original URI<br>
(early version) using the USBRADIO channel driver, and one URIX (newer<br>
version) using the SIMPLEUSB channel driver. I've followed the<br>
step-by-step (or was that Crossbar 5 Duude?) instructions for starting<br>
off with a single node, then adding the second node. That simply doesn't<br>
work. The second URIx green L.E.D. stays solid throughout the process.<br>
Are these lines provided for informational purposes only, or can they be<br>
edited to force the second device to be recognized and assigned?<br>
<br>
N5ZUA<br>
<br>
|<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/7a2b5993/attachment-0001.html" rel="noreferrer" target="_blank">http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/7a2b5993/attachment-0001.html</a>><br>
<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Sat, 21 May 2016 22:02:45 +0200<br>
From: "<a href="mailto:info@rainerbertsch.de">info@rainerbertsch.de</a>" <<a href="mailto:info@rainerbertsch.de">info@rainerbertsch.de</a>><br>
To: <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
Subject: [App_rpt-users] Voter RTCM sometimes offline-mode but not<br>
when there is a telnet connection<br>
Message-ID: <<a href="mailto:C881739D-1333-4A44-AF95-0167725A6BCE@rainerbertsch.de">C881739D-1333-4A44-AF95-0167725A6BCE@rainerbertsch.de</a>><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Hi there,<br>
<br>
Since November, we are trying to build a voting system.<br>
We need some help please !<br>
<br>
Hardware:<br>
Supermicro Intel Atom D525 (we also tried a RaspberryPi and an other computer)<br>
Software: Since yesterday DIAL from Alllstar-Homepage (Before we tried it with ACID)<br>
RTCM from Micro Node, Mark, we have 4 of them and tried all of them<br>
Garmin GPS 18x LVC, also wie tried 4 of them.<br>
<br>
Error:<br>
More or less often the RTCM switch in the offline mode. When there is traffic very often.<br>
But not if at the same time there is a telnet connection from any computer to the RTCM.<br>
<br>
We suspect a networking problem between our asterisk-server and RTCM<br>
Network-Card is set to 10 MB / s half-duplex like in the RTCM.<br>
<br>
From tcpdump from server to rtcm we got:<br>
<br>
??? snip ----------<br>
<br>
GPSTime (cli0_yy): 05/05/16 12:48:01.000000000<br>
SysTime: 05/05/16 12:48:01.040000<br>
DrainTime: 05/05/16 12:48:01.000<br>
Got GPS (cli0_yy): Lat: 4857.60N, Lon: 00915.01E, Elev: 214.4<br>
sending KEEPALIVE (GPS) packet to client cli2_bprx digest bbb4c643<br>
GPSTime (cli2_bprx): 05/05/16 12:48:01.000000000<br>
SysTime: 05/05/16 12:48:01.300000<br>
DrainTime: 05/05/16 12:48:01.240<br>
Got GPS (cli2_bprx): Lat: 4853.16N, Lon: 00912.65E, Elev: 317.2<br>
sending KEEPALIVE (GPS) packet to client cli0_yy digest 79d9c77d<br>
GPSTime (cli0_yy): 05/05/16 12:48:02.000000000<br>
SysTime: 05/05/16 12:48:02.040000<br>
DrainTime: 05/05/16 12:48:02.000<br>
Got GPS (cli0_yy): Lat: 4857.60N, Lon: 00915.01E, Elev: 214.4<br>
sending KEEPALIVE (GPS) packet to client cli2_bprx digest bbb4c643<br>
[May 512:48:03]NOTICE[6559]:chan_voter.c:3632voter_reader:Voter<br>
<br>
lost master timing source!!<br>
<br>
sending packet challenge 200371797 digest 7749985d password BLAH sending packet challenge 200371797 digest 7749985d password BLAH sending packet challenge 200371797 digest bbb4c643 password BLAH GPSTime (cli2_bprx): 05/05/16 12:48:18.000000000<br>
<br>
SysTime: 05/05/16 12:48:18.320000<br>
DrainTime: 01/01/70 01:00:00.340<br>
Got GPS (cli2_bprx): Lat: 4853.16N, Lon: 00912.65E, Elev: 317.2<br>
<br>
-- Voter client cli0_yy disconnect (timeout)<br>
<br>
sending KEEPALIVE (GPS) packet to client cli2_bprx digest bbb4c643<br>
<br>
??? snip ----------<br>
<br>
Konfiguration of the Ethernet-Card<br>
<br>
# ethtool eth0<br>
Settings for eth0:<br>
Supported ports: [TP]<br>
Supported link modes: 10baseT / Half 10baseT / Full<br>
100baseT / Half 100baseT / Full<br>
1000baseT / Full<br>
Supported break frame use: No<br>
Supports auto-negotiation: Yes<br>
Advertised link modes: Not reported<br>
Advertised break frame use: No<br>
Advertised auto-negotiation: No<br>
Speed: 10Mb / s<br>
Duplex: Half<br>
Port: Twisted Pair<br>
PHYAD: 1<br>
Transceiver: internal<br>
Auto-negotiation: off<br>
MDI-X: off (auto)<br>
Supports Wake-on: pumbg<br>
Wake-on: g<br>
Current message level: 0x00000007 (7)<br>
drv sample link<br>
<br>
Does anyone have an idea what it may be ?<br>
Why there is no problem with telnet at the same time and how can we run the system without this workaround<br>
<br>
--<br>
Rainer Bertsch<br>
DF3SY<br>
<br>
<br>
<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/9ca14c8a/attachment-0001.html" rel="noreferrer" target="_blank">http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/9ca14c8a/attachment-0001.html</a>><br>
<br>
------------------------------<br>
<br>
Message: 3<br>
Date: Sat, 21 May 2016 13:55:40 -0700<br>
From: "kk6ecm" <<a href="mailto:kk6ecm@gmail.com">kk6ecm@gmail.com</a>><br>
To: <<a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a>><br>
Subject: Re: [App_rpt-users] usbradio_tune_xxxxx.conf where .conf =<br>
.confusion<br>
Message-ID: <638EEEDD093A4435AC75ECFA4CFB35E8@ThePykesHP><br>
Content-Type: text/plain; charset="us-ascii"<br>
<br>
run lsusb at the command line, then set devstr=<bus>-<device> for the<br>
device(s) shown. Your example is for Bus 004 Device 002.<br>
<br>
<br>
<br>
Bob<br>
<br>
kk6ecm<br>
<br>
73<br>
<br>
<br>
<br>
_____<br>
<br>
From: <a href="mailto:app_rpt-users-bounces@ohnosec.org">app_rpt-users-bounces@ohnosec.org</a><br>
[mailto:<a href="mailto:app_rpt-users-bounces@ohnosec.org">app_rpt-users-bounces@ohnosec.org</a>] On Behalf Of Steve Agee<br>
Sent: Saturday, May 21, 2016 12:05 PM<br>
To: <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
Subject: [App_rpt-users] usbradio_tune_xxxxx.conf where .conf = .confusion<br>
<br>
<br>
<br>
Hello list:<br>
<br>
I've searched<br>
<br>
<<a href="http://www.xelatec.com/xipar/node/180" rel="noreferrer" target="_blank">http://www.xelatec.com/xipar/node/180</a>><br>
<<a href="http://www.xelatec.com/xipar/node/180" rel="noreferrer" target="_blank">http://www.xelatec.com/xipar/node/180</a>><br>
<br>
and I fully understand the description/explanations given. What I don't<br>
understand, with specific attention to the lines:<br>
<br>
; name=usb ;<br>
; devnum=1 ;<br>
devstr=4-2 ;<br>
<br>
is how to manually uncomment, and manipulate them. In this particular<br>
instance, I'm trying to get a DIAL box running with one original URI (early<br>
version) using the USBRADIO channel driver, and one URIX (newer version)<br>
using the SIMPLEUSB channel driver. I've followed the step-by-step (or was<br>
that Crossbar 5 Duude?) instructions for starting off with a single node,<br>
then adding the second node. That simply doesn't work. The second URIx green<br>
L.E.D. stays solid throughout the process. Are these lines provided for<br>
informational purposes only, or can they be edited to force the second<br>
device to be recognized and assigned?<br>
<br>
N5ZUA<br>
<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/8eb8b1d0/attachment-0001.html" rel="noreferrer" target="_blank">http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/8eb8b1d0/attachment-0001.html</a>><br>
<br>
------------------------------<br>
<br>
Message: 4<br>
Date: Sat, 21 May 2016 16:05:25 -0500<br>
From: Steve Agee <<a href="mailto:n5zua@earthlink.net">n5zua@earthlink.net</a>><br>
To: <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
Subject: Re: [App_rpt-users] usbradio_tune_xxxxx.conf where .conf =<br>
.confusion<br>
Message-ID: <<a href="mailto:86a1038a-7c34-a1c4-edf1-89da5dead8a7@earthlink.net">86a1038a-7c34-a1c4-edf1-89da5dead8a7@earthlink.net</a>><br>
Content-Type: text/plain; charset="windows-1252"; Format="flowed"<br>
<br>
Yup, tried that early on with no luck. Then tried using the (W) command<br>
in both radio-tune-menu or simpleusb-tune-menu. The <bus>-<dev> listed<br>
in the tuning files does not match what the "lsusb" command reports.<br>
Well, the <bus> matches, but NOT the <dev>. On a working ACID install<br>
under same conditions, I have two (count them two) different tuning<br>
files where "devnum=3" go figure, and it works!<br>
N5ZUA<br>
<br>
On 5/21/2016 3:55 PM, kk6ecm wrote:<br>
><br>
> run lsusb at the command line, then set devstr=<bus>-<device> for the<br>
> device(s) shown. Your example is for Bus 004 Device 002.<br>
><br>
> Bob<br>
><br>
> kk6ecm<br>
><br>
> 73<br>
><br>
> ------------------------------------------------------------------------<br>
><br>
> *From:*<a href="mailto:app_rpt-users-bounces@ohnosec.org">app_rpt-users-bounces@ohnosec.org</a><br>
> [mailto:<a href="mailto:app_rpt-users-bounces@ohnosec.org">app_rpt-users-bounces@ohnosec.org</a>] *On Behalf Of *Steve Agee<br>
> *Sent:* Saturday, May 21, 2016 12:05 PM<br>
> *To:* <a href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
> *Subject:* [App_rpt-users] usbradio_tune_xxxxx.conf where .conf =<br>
> .confusion<br>
><br>
> Hello list:<br>
><br>
> I've searched<br>
><br>
> <<a href="http://www.xelatec.com/xipar/node/180" rel="noreferrer" target="_blank">http://www.xelatec.com/xipar/node/180</a>><br>
> <<a href="http://www.xelatec.com/xipar/node/180" rel="noreferrer" target="_blank">http://www.xelatec.com/xipar/node/180</a>><br>
><br>
> and I fully understand the description/explanations given. What I<br>
> don't understand, with specific attention to the lines:<br>
><br>
> |; name=usb ;|<br>
> |; devnum=1 ;|<br>
> |devstr=4-2 ;|<br>
><br>
> |is how to manually uncomment, and manipulate them. In this particular<br>
> instance, I'm trying to get a DIAL box running with one original URI<br>
> (early version) using the USBRADIO channel driver, and one URIX (newer<br>
> version) using the SIMPLEUSB channel driver. I've followed the<br>
> step-by-step (or was that Crossbar 5 Duude?) instructions for starting<br>
> off with a single node, then adding the second node. That simply<br>
> doesn't work. The second URIx green L.E.D. stays solid throughout the<br>
> process. Are these lines provided for informational purposes only, or<br>
> can they be edited to force the second device to be recognized and<br>
> assigned?|<br>
><br>
> |N5ZUA|<br>
><br>
><br>
><br>
> _______________________________________________<br>
> App_rpt-users mailing list<br>
> <a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
> <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
><br>
> To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.<br>
<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/69ecfba1/attachment.html" rel="noreferrer" target="_blank">http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/69ecfba1/attachment.html</a>><br>
<br>
------------------------------<br>
<br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
<br>
End of App_rpt-users Digest, Vol 87, Issue 33<br>
*********************************************<br>
</blockquote></div>