<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>Hear, hear. no dog in this hunt, but I've not found an interface which was as flexible and easy to use, and i have a shack full of dmk uri dongles. everything from a boafeng 888 through alinco dr transcievers in simplex and as a repreater, a repeaterbuilder micor conversion, gm300s, an msf5000, hooked to both acid and dial on pi computers, and with a speaker on one of the outputs to boot. </div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">45 bucks with the chips presoldered, it has the right chip, not some potted knock-off, a memory chip, iirc, kevin brought out a few gpio pins, spend a few couple hours stuffing a board, and you are supporting a fellow ham. </div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">is 45 bucks REALLY going to break the bank for something that, if you can read a schematic and understand a parts list???</div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">no financial interest other than a satisfied customer.<br><br>--<div>Bryan</div><div>Sent from my iPhone 6S.<span style="font-size: 13pt;">..No electrons were harmed in the sending of this message.</span></div><div><br><div><br></div></div></div><div><br>On May 28, 2016, at 10:52, Kevin Custer <<a href="mailto:kuggie@kuggie.com">kuggie@kuggie.com</a>> wrote:<br><br></div><blockquote type="cite"><div><span>On 5/28/2016 10:32 AM, Skyler F wrote:</span><br><blockquote type="cite"><span>This is what I am trying to say:</span><br></blockquote><blockquote type="cite"><span></span><br></blockquote><blockquote type="cite"><span>There are several cases when I don't want to use DSP and use COR. (Weather we are using flat or speaker is not relevant)</span><br></blockquote><blockquote type="cite"><span></span><br></blockquote><span></span><br><span>Here's another approach for you folks that like to build stuff, but the wiring to the CM108/119 is intimidating or you are running into problems finding leaded USB adapters.</span><br><span></span><br><span>The RA-35 is a $35 radio adapter with many benefits over a simple FOB. Whether or not it suits your application or budget is up to you.</span><br><span></span><br><span>Here are the high points:</span><br><span>Complete kit - you solder everything - $35.00</span><br><span>Complete kit with the CM119A and EEPROM pre-soldered - $45.00</span><br><span></span><br><span>Verbose information available here:</span><br><span><a href="http://www.masterscommunications.com/">http://www.masterscommunications.com/</a></span><br><span>Click on RA-35.</span><br><span></span><br><span>Kevin Custer - W3KKC</span><br><span></span><br><span>_______________________________________________</span><br><span>App_rpt-users mailing list</span><br><span><a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a></span><br><span><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br><span></span><br><span>To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"</span><br><span>You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </span><br></div></blockquote></body></html>