<div dir="ltr">Aha, thats where my error is :<div>I did not add :</div><div> <span style="font-size:12.8px">in-interface=ether1-gateway</span></div><div>just left it blank</div><div><br></div><div>Now outbound connections are working, thanks!</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Jul 18, 2016 at 11:50 AM, Pawlowski, Adam <span dir="ltr"><<a href="mailto:ajp26@buffalo.edu" target="_blank">ajp26@buffalo.edu</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div lang="EN-US" link="blue" vlink="#954F72">
<div>
<p class="MsoNormal"><span style="color:#1f497d">Eric,<u></u><u></u></span></p>
<p class="MsoNormal"><span style="color:#1f497d"> <u></u><u></u></span></p>
<p class="MsoNormal"><span style="color:#1f497d"> Thanks for your reply. I would assume that an ALG would be acceptable, so it would not be necessary to make such a sweeping arrangement of ports, but I had just thrown that in there to get it
working. This is connected to a cable modem, which seems to go up and down at various times, and has worked relatively well in keeping up with any issues. Really hasn’t’ been any trouble with it, seems plenty overkill and reliable.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="color:#1f497d">Adam <u></u><u></u></span></p>
<p class="MsoNormal"><span style="color:#1f497d"><u></u> <u></u></span></p>
<div style="border:none;border-left:solid blue 1.5pt;padding:0in 0in 0in 4.0pt">
<div>
<div style="border:none;border-top:solid #b5c4df 1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif""> <a href="mailto:ve3ei@iescomm.ca" target="_blank">ve3ei@iescomm.ca</a> [mailto:<a href="mailto:ve3ei@iescomm.ca" target="_blank">ve3ei@iescomm.ca</a>]
<br>
<b>Sent:</b> Monday, July 18, 2016 12:48 PM<br>
<b>To:</b> Pawlowski, Adam; <a href="mailto:app_rpt-users@ohnosec.org" target="_blank">app_rpt-users@ohnosec.org</a><br>
<b>Subject:</b> RE: [App_rpt-users] Outbound call problem! Unable to handleindication 13<u></u><u></u></span></p>
</div>
</div><div><div class="h5">
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Forget what I said about RTP, I see you are using SIP. However, depending on your SIP server, you should not need that many connections. There are only 4 streams used per contact, so 100 streams should be suffient. Make sure the RTP are
set on both the router and the asterisk server.<u></u><u></u></p>
<p class="MsoNormal">Eric – ve3ei<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Sent from <a href="https://go.microsoft.com/fwlink/?LinkId=550986" target="_blank">
Mail</a> for Windows 10<u></u><u></u></p>
<p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Times New Roman","serif""><u></u> <u></u></span></p>
<div style="border:none;border-top:solid #e1e1e1 1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b>From: </b><a href="mailto:ajp26@buffalo.edu" target="_blank">Pawlowski, Adam</a><br>
<b>Sent: </b>Monday, July 18, 2016 11:38 AM<br>
<b>To: </b><a href="mailto:app_rpt-users@ohnosec.org" target="_blank">app_rpt-users@ohnosec.org</a><br>
<b>Subject: </b>Re: [App_rpt-users] Outbound call problem! Unable to handleindication 13<u></u><u></u></p>
</div>
<p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Times New Roman","serif""><u></u> <u></u></span></p>
<p class="MsoNormal">This is what I have for my node:<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">add action=dst-nat chain=dstnat comment="Allstar Link IAX2" dst-port=4569 in-interface=ether1-gateway protocol=udp to-addresses=192.168.1.120 to-ports=4569<u></u><u></u></p>
<p class="MsoNormal">add action=dst-nat chain=dstnat comment="Allstarlink chan_echolink" dst-port=5198-5199 in-interface=ether1-gateway protocol=udp to-addresses=192.168.1.120 to-ports=5198-5199<u></u><u></u></p>
<p class="MsoNormal">add action=dst-nat chain=dstnat comment="Allstarlink SIP" dst-port=5060 in-interface=ether1-gateway protocol=udp to-addresses=192.168.1.120 to-ports=5060<u></u><u></u></p>
<p class="MsoNormal">add action=dst-nat chain=dstnat comment="Allstarlink RTP" dst-port=10000-65535 in-interface=ether1-gateway protocol=udp to-addresses=192.168.1.120 to-ports=10000-65535<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">I am not running a src nat for the IAX port outbound. I have the rule in the chain but disabled, so I must have determined I didn't need it.<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">It either does PAT correctly in the background, or isn't natting that port:<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">220controller*CLI> iax2 show registry<u></u><u></u></p>
<p class="MsoNormal">Host dnsmgr Username Perceived Refresh State<u></u><u></u></p>
<p class="MsoNormal"><a href="http://67.215.233.178:4569" target="_blank">67.215.233.178:4569</a> Y 27709 <a href="http://67.242.153.201:4569" target="_blank">67.242.153.201:4569</a> 60 Registered<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">I installed the MicroTIK router to replace an Adtran device which was utter trash and refused to do a static PAT, and it's been working swell since, to the best of my knowledge.<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">If there's some reason I should be doing a source NAT for that port, I guess, let me know? I suppose it would only make a difference if I'm operating multiple nodes and didn't want to connect them together internally.<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Regards,<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Adam<u></u><u></u></p>
<p class="MsoNormal">KC2YQF<u></u><u></u></p>
<p class="MsoNormal">_______________________________________________<u></u><u></u></p>
<p class="MsoNormal">App_rpt-users mailing list<u></u><u></u></p>
<p class="MsoNormal"><a href="mailto:App_rpt-users@ohnosec.org" target="_blank">App_rpt-users@ohnosec.org</a><u></u><u></u></p>
<p class="MsoNormal"><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<u></u><u></u></p>
<p class="MsoNormal">You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
</div></div></div>
</div>
</div>
<br>_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a><br>
<a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></blockquote></div><br><br clear="all"><div><br></div>-- <br><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><font face="arial narrow, sans-serif" color="#38761d">Skyler Fennell</font><div><font face="arial narrow, sans-serif" color="#38761d"><a href="http://amsatnet.info" target="_blank">amsatnet.info</a></font></div><div><font face="arial narrow, sans-serif" color="#38761d">KDØWHB</font></div><div><font face="arial narrow, sans-serif" color="#38761d"><a href="mailto:electricity440@gmail.com" target="_blank">electricity440@gmail.com</a></font></div></div></div>
</div>