<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Good catch by Robert. <br>
<br>
I think you have to have both carrierfrom and ctcssfrom set to dsp
in usbradio.conf. for the tone decoding to work.<br>
<br>
On 11/6/2016 6:22 PM, Bob Poff wrote:
<blockquote
cite="mid:af64c408-ceef-4349-b38b-412a05d92a12@typeapp.com"
type="cite">
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
<div>Personally I wouldn't bother with using the tone boards in
the MII.<br>
<br>
</div>
<div>On both of mine, I just pulled VOL/SQL HI from the backplane.
Then let the usbradio DSP do it all.<br>
<br>
</div>
<div>On the MIIe (direct FM exciter) I was able to feed both CG
and voice into the CG input of the exciter. Measured it to be
flat to 8 KC. Then let usbradio do the pre-emphasis, CG
encode/decode, and de-emphasis.<br>
<br>
</div>
<div>On the regular MII (phase modulated exciter), again all DSP.
Voice into the exciter mic input, CG encode to the CG input.
With the exciter doing the pre-emphasis.<br>
<br>
</div>
<div><!-- tmjah_g_1299s -->Robert A. Poff<!-- tmjah_g_1299e --><br>
<!-- tmjah_g_1299s -->Loganville, Pa<!-- tmjah_g_1299e --></div>
<div
style="font-size:10.0pt;font-family:"Tahoma","sans-serif";padding:3.0pt
0in 0in 0in">
<hr style="border:none;border-top:solid #E1E1E1 1.0pt">
<b>From:</b> Chris Viningre <chrisviningre@gmail.com><br>
<b>Sent:</b> Sun Nov 06 16:19:11 EST 2016<br>
<b>To:</b> Bob Poff <wb3awj@comcast.net><br>
<b>Cc:</b> <a class="moz-txt-link-abbreviated" href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
<b>Subject:</b> Re: [App_rpt-users] No PL Tone<br>
</wb3awj@comcast.net></chrisviningre@gmail.com></div>
<br>
<p>I may have been unclear on the problem. I can not get the
repeater to tone squelch. It is always open. The repeater is
working fine other then that. I have tried these settings and
still no luck. Thanks for all the help.</p>
<p>Chris</p>
<br>
<div class="moz-cite-prefix">On 11/06/2016 10:55 AM, Bob Poff
wrote:<br>
</div>
<blockquote
cite="mid:24d7b8ef-5db9-41f8-b93f-94cd5851c7d8@typeapp.com"
type="cite">
<div>First of all, you need carrierfrom=dsp not usb.<br>
<br>
</div>
<div>carrierfrom=dsp ; Carrier Detect Source ; Options -
no,usb,usbinvert,dsp,vox ; no - no carrier detection at all ;
usb - via USB radio adapter COR connection ; usbinvert - same
as above but inverted polarity. ; dsp - from RX noise using
dsp methods ; vox - voice activated via RX audio<br>
<br>
</div>
<div>Take a look at:<br>
<a moz-do-not-send="true"
href="https://allstarlink.org/usbradio.html">https://allstarlink.org/usbradio.html</a><br>
<br>
</div>
<div><!-- tmjah_g_1299s -->Robert A. Poff<!-- tmjah_g_1299e --><br>
<!-- tmjah_g_1299s -->Loganville, Pa<!-- tmjah_g_1299e --></div>
<div
style="font-size:10.0pt;font-family:"Tahoma","sans-serif";padding:3.0pt
0in 0in 0in">
<hr style="border:none;border-top:solid #E1E1E1 1.0pt"> <b>From:</b>
Chris Viningre <chrisviningre gmail.com="gmail.com"><br>
<b>Sent:</b> Sat Nov 05 17:19:25 EDT 2016<br>
<b>To:</b> <a moz-do-not-send="true"
class="moz-txt-link-abbreviated"
href="mailto:app_rpt-users@ohnosec.org">app_rpt-users@ohnosec.org</a><br>
<b>Subject:</b> [App_rpt-users] No PL Tone<br>
</chrisviningre></div>
<br>
<pre class="blue">I am trying to get the PL tone of 100.0 hz to work on my GE Mastr II
repeater. I'm using a URI interface on a laptop running Dail software.
Everything is working other than the tones. Here is my rpt.conf and
usbradio.conf. Thanks for any help.
Chris Viningre
70 W. Roadrunner
Salt Flat, Texas 79847
C:(915) 504-1510
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:chrisviningre@gmail.com">chrisviningre@gmail.com</a>
Amateur Radio Operator: WS5B
<a moz-do-not-send="true" href="https://www.qrz.com/db/ws5b">https://www.qrz.com/db/ws5b</a>
<a moz-do-not-send="true" href="http://www.reverbnation.com/chrisviningre">http://www.reverbnation.com/chrisviningre</a>
Radio Repeater configuration file (for use with app_rpt)
;
;
; Your Repeater
;
[43934] ; Change this to your assigned node
number
rxchannel=Radio/usb43934
duplex=2
erxgain=-3
etxgain=3
;controlstates=controlstates
scheduler=schedule43934
morse=morse43934
macro=macro43934
functions=functions43934
phone_functions=functions43934
link_functions=functions43934
telemetry=telemetry
wait_times=wait-times
context = radio
callerid = "Repeater" <0000000000>
idrecording = |iWS5B
accountcode=RADIO
hangtime=1000
;
; Usbradio channel driver Configuration
File
;
[general]
[usb43934]
hdwtype=0
rxboost=1
txboost=1
rxctcssrelax=1
txctcssdefault=100.0
rxctcssfreqs=100.0
txctcssfreqs=100.0
;rxctcssoverride=0
carrierfrom=usb
ctcssfrom=usb
rxdemod=speaker
txprelim=no
txlimonly=no
txtoctype=no
txmixa=composite
txmixb=no
invertptt=0
duplex=1
rxondelay=0
rxnoisefiltype=0
eeprom=0
<hr>
App_rpt-users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>
<a moz-do-not-send="true" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
To unsubscribe from this list please visit <a moz-do-not-send="true" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options
button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
</pre>
</blockquote>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@ohnosec.org">App_rpt-users@ohnosec.org</a>
<a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
To unsubscribe from this list please visit <a class="moz-txt-link-freetext" href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
</pre>
</blockquote>
</body>
</html>