<div dir="ltr"><div class="gmail_default" style="font-family:comic sans ms,sans-serif;font-size:small">I have my home router set per portforward for Allstar UDP and Allstar seems fine. I added 5198-5199 as UPD I/O and 5200 TCP. I can connect with EchoTest 9999 node fine from a receiver connected to the USB fob on the node computer. I can not connect from either the LAN or WAN back into the Echo node. </div><div class="gmail_default" style="font-family:comic sans ms,sans-serif;font-size:small">I disconnected the node physically from the LAN and logged into my computer Echolink app. Firewall test showed TCP OK, but 5198 OK but 5199 UDP not working. </div><div class="gmail_default" style="font-family:comic sans ms,sans-serif;font-size:small">I reconfigured the router (Netgear FVS-318G) to Port Triggering. The Echolink app runs a normal firewall test instantly with no faults. Exit the app and reconnect the node to the LAN. Echolink can connect to 9999 test server, but again, no connection CALLING Echolink.</div><div class="gmail_default" style="font-family:comic sans ms,sans-serif;font-size:small">Now, I ran netstat on the node computer and see TCP 5200, UDP IAX (default),5198, 5192 as ports. BUT looking at listening ports, never have I seen UDP 5198 or 5199 as listening. </div><div class="gmail_default" style="font-family:comic sans ms,sans-serif;font-size:small">If Port Triggering has a timeout after the last outgoing packet, how would UDP 5198, 5199 be able to stay listening for an unsolicited packet coming in from a remote node?</div><div class="gmail_default" style="font-family:comic sans ms,sans-serif;font-size:small">Help!</div><div class="gmail_default" style="font-family:comic sans ms,sans-serif;font-size:small">73, Duane KA1LM</div></div>