<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>Are you using the alternate IP in the RTCM? Check the RTCM status (98) make 100% sure the voters are logged into the appropriate server. </div><div><br></div><div>(Going off of memory) in asterisk CLI you can do a voter display [channel name] and itll show you all the connected RTCM's and the current RSSI. Make sure that matches what you expect. </div><div><br></div><div>Voted receiver C on mountain 1, which server is it logged into, mountain 1's or mountain 2's?</div><div><br></div><div>Kinda need to see RTCM configs, voter.conf and rpt.conf</div><div><br><div>Cheers,<div>Jesse</div></div></div><div><br>On Feb 2, 2017, at 5:08 PM, Allstar Admin <<a href="mailto:allstarlinks@gmail.com">allstarlinks@gmail.com</a>> wrote:<br><br></div><blockquote type="cite"><div><div dir="ltr">You setup is difficult to envision, being the visual sort of guy that I am. I'd have to see a drawing to understand the picture. :-)<div><br></div><div>But maybe this will help. RTCMs, or more correctly stated, chan_voter is picky about site names and passwords. You have to be sure no site names or passwords are duplicated. Also, you must not have a password that the is the same as any site name including it's own site. Otherwise chan_voter gets very confused. Give you voter.conf a good going over and let us know how you make out. </div></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><br></div>73,<div>Allstar Admin</div><div><a href="http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br></div></div></div></div>
<br><div class="gmail_quote">On Thu, Feb 2, 2017 at 1:38 PM, James Cizek <span dir="ltr"><<a href="mailto:james.m.cizek@gmail.com" target="_blank">james.m.cizek@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>Hi folks,</div><div><br></div><div>I have a unique problem I am hoping someone on the list can help me uncover where to look next. The situation is </div><div>this:</div><div><br></div><div>I have repeaters are 2 mountain tops. Mountain 1 and Mountain 2. On Mountain 1 are (2) repeaters, a VHF (repeater A) and </div><div>UHF (Repeater B). On Mountain 2 is a VHF (Repeater C) and UHF (Repeater D). </div><div><br></div><div>On mountain 1, there are also voted receivers for Repeaters C & D. </div><div><br></div><div>There are DIAL boxes on both mountains. Repeaters A&B using DIAL on Mountain 1 (non-voting config, just basic repeater), and Repeaters C,D and both voters using</div><div>DIAL box on Mountain 2 (microwave links between mountain 1 & 2).</div><div><br></div><div>Everything has it's own RTCM (so there are 6 RTCMs in this situation). Everything is private (no public allstar nodes)</div><div><br></div><div>Looking at allmon2 (running on each of the DIAL servers) I can see that there are NO links established and the RSSI bars </div><div>respond to each of the voted receivers appropriately. </div><div><br></div><div>I have checked each RTCM and DIAL box and verified that everything is logging in to where it is supposed to, and no where else.</div><div><br></div><div>The problem I have is that when you transmit on Repeater A, the audio is being transmitted on both Repeaters A & C.</div><div>If you transmit on repeater C, the audio is only retransmitted on Repeater C (as it should be).</div><div><br></div><div>Looking at allmon, even during a transmission, there are NO links established.</div><div><br></div><div>Verbose output on asterisk (asterisk -rvvvvvvvvv) shows no links established on either DIAL box. </div><div><br></div><div>I can't figure out why DIAL on mountain 1 is sending the audio over to Mountain 2 DIAL (and only on the VHF set of repeaters even though the UHF set has an identical config). </div><div>Any thoughts on where I might go looking would be much appreciated... I have been tearing my hair out on this one for a while!</div><div><br></div><div>Happy to share any requested config. </div><div>Thanks in advance for any thoughts/comments/insights/<wbr>etc!</div><div><br></div><div>james</div><div>KI0KN</div></div>
<br>______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></blockquote></div><br></div>
</div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>App_rpt-users mailing list</span><br><span><a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.allstarlink.org</a></span><br><span><a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br><span></span><br><span>To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"</span><br><span>You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </span></div></blockquote></body></html>