<div dir="ltr">Sorry, I unplug it and re-connected it<div><br></div></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div><br></div><div><br></div><div>--</div><div><span style="font-size:12.8px">Thanks, David</span><br></div></div><div dir="ltr"><br></div><div dir="ltr"><span style="color:rgb(68,68,68);font-family:Georgia,"Times New Roman",Times,serif;font-size:12px">"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."</span><br></div><div dir="ltr">Thomas Jefferson<span style="color:rgb(68,68,68);font-family:Georgia,"Times New Roman",Times,serif;font-size:12px"><br></span></div></div></div></div></div></div></div></div></div></div></div></div></div>
<br><div class="gmail_quote">On Thu, Mar 23, 2017 at 12:01 PM, Steve Zingman <span dir="ltr"><<a href="mailto:szingman@msgstor.com" target="_blank">szingman@msgstor.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
oops wrong message to reply to. Sorry.<div><div class="h5"><br>
<br>
<div class="m_4101084818732292495moz-cite-prefix">On 3/23/2017 3:00 PM, David Shaw wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">Yes, its a thumbDV
<div><br>
</div>
<div>David</div>
</div>
<div class="gmail_extra"><br clear="all">
<div>
<div class="m_4101084818732292495gmail_signature" data-smartmail="gmail_signature">
<div dir="ltr">
<div>
<div dir="ltr">
<div>
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div><br>
</div>
<div><br>
</div>
<div>--</div>
<div><span style="font-size:12.8px">Thanks,
David</span><br>
</div>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><span>"Laws
that forbid the carrying of
arms...disarm only those who are
neither inclined nor determined to
commit crimes. Such laws make things
worse for the assaulted and better
for the assailants; they serve
rather to encourage than prevent
homicides, for an unarmed man may be
attacked with greater confidence
than an armed one."</span><br>
</div>
<div dir="ltr">Thomas Jefferson<span><br>
</span></div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<br>
<div class="gmail_quote">On Thu, Mar 23, 2017 at 11:55 AM, Steve
Zingman <span dir="ltr"><<a href="mailto:szingman@msgstor.com" target="_blank">szingman@msgstor.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000"> The DV3000 is plugged
in? If it is unplug it and re-connect it.
<div>
<div class="m_4101084818732292495h5"><br>
<br>
<div class="m_4101084818732292495m_-3395176790875608105moz-cite-prefix">On
3/23/2017 2:31 PM, David Shaw wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">No problem Bill, Would you like me to
connect via ASL to your node to see if you have
the same problem as your local QSO users do? I
can't speak for the RIM Lite.
<div><br>
</div>
<div>David</div>
</div>
<div class="gmail_extra"><br clear="all">
<div>
<div class="m_4101084818732292495m_-3395176790875608105gmail_signature" data-smartmail="gmail_signature">
<div dir="ltr">
<div>
<div dir="ltr">
<div>
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div><br>
</div>
<div><br>
</div>
<div>--</div>
<div><span style="font-size:12.8px">Thanks,
David</span><br>
</div>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><span>"Laws
that forbid the
carrying of
arms...disarm only
those who are neither
inclined nor
determined to commit
crimes. Such laws make
things worse for the
assaulted and better
for the assailants;
they serve rather to
encourage than prevent
homicides, for an
unarmed man may be
attacked with greater
confidence than an
armed one."</span><br>
</div>
<div dir="ltr">Thomas
Jefferson<span><br>
</span></div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<br>
<div class="gmail_quote">On Thu, Mar 23, 2017 at
11:20 AM, William Higgins <span dir="ltr"><<a href="mailto:higgins.ws@gmail.com" target="_blank">higgins.ws@gmail.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div><span style="font-size:12.8px">Hi
David!</span></div>
<div><span style="font-size:12.8px"><br>
</span></div>
<div><span style="font-size:12.8px">First of
all, thanks for your suggestions.</span></div>
<div><span style="font-size:12.8px"><br>
</span></div>
<div><span style="font-size:12.8px">I'm not
saying that the network can't be a
problem, however, there is seldom anyone
coming into the node via Echolink or
ASL. The audio dropouts are
predominantly from repeater receiver
audio, during local QSOs. When I spoke
of the CAT7 cable with the ferrite
chokes, I was referencing the interface
cable I constructed to run between the
RIM Lite and the repeater itself. The
RPi3 is connected to the network via
Wifi to a router that is no more than
4-5 feet away. I've seen no evidence of
the link bouncing at all. We did not
connect it via Ethernet because all the
host's router's ethernet ports were
full. We have purchased a switch to
expand his network so that we can
connect via Ethernet instead as soon as
we get approval from him to do so.</span></div>
<div><span style="font-size:12.8px"><br>
</span></div>
<div><span style="font-size:12.8px">I am
wondering if this might be a USB
problem, however I have found no
indication in any of the system or
Asterisk log files of that. The RIM
Lite is the only USB device plugged into
the RPi3. I suppose it's also possible
that the RIM Lite is wonky, but I have
no other device with which to replace
it. I have not yet put a ferrite choke
on the USB cable, but plan to do that
during my next trip to the site.</span></div>
<div><span style="font-size:12.8px"><br>
</span></div>
<div><span style="font-size:12.8px">I really
appreciate all the ideas that are coming
forward. If I don't get this solved
soon, I'm going to have to put the
original CAT200 controller back in
place, hang my head in shame and restart
this whole project at a later time. (Oh
well, it won't be the first time for
that! LOL)</span></div>
<div><span style="font-size:12.8px"><br>
</span></div>
<div><span style="font-size:12.8px">Bill
Higgins</span></div>
<div><span style="font-size:12.8px">N0NOE</span></div>
<div><br>
</div>
<span style="font-size:12.8px">
<div><span style="font-size:12.8px"><br>
</span></div>
<div><span style="font-size:12.8px"><br>
</span></div>
>After reading all the post. I don't
think this is a OS problem (N4IRS can</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>chime in)
but more of network or USB problem. I'm
using good old Limey</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>Linux and
a 4 port pci card.</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>Allstar
uses UDP. Drop a UDP packet and that will
drop out on the repeater.</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>SSH and
SNMP uses TCP. Drop out a TCP packet. It
will send a replacement</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>packet.
No loss of data but slower.</span><br style="font-size:12.8px">
><br style="font-size:12.8px">
><br style="font-size:12.8px">
<span style="font-size:12.8px">>Are you
using both WiFi and Ethernet at the same
time? I would try using</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>just one
mode to access the internet. How are you
connecting to the</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>Internet?
i.e. WiFi to a cell hotspot or WiFi to a
Mesh Network? What kind</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>of local
network?</span><br style="font-size:12.8px">
><br style="font-size:12.8px">
<span style="font-size:12.8px">>"Modular
connectors and Cat-7 cable for the
interface with snap-on chokes</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>at both
ends</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>Pi is
connected to the local network via Wifi
(We are prepared to move this</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>to
Ethernet, but need approval of the host to
do so)"</span><br style="font-size:12.8px">
><br style="font-size:12.8px">
<span style="font-size:12.8px">>If this
is a network problem. I would use the mrt
command to test your</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>network
to the ASL server. Google Linux MRT and
Linux MRT save to a file.</span><br style="font-size:12.8px">
><br style="font-size:12.8px">
<span style="font-size:12.8px">>Let us
know.</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>David</span><br style="font-size:12.8px">
<span style="font-size:12.8px">>KE6UPI</span><br>
</div>
<br>
______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.allstarlin<wbr>k.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/c<wbr>gi-bin/mailman/listinfo/app_rp<wbr>t-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/c<wbr>gi-bin/mailman/listinfo/app_rp<wbr>t-users</a>
and scroll down to the bottom of the page.
Enter your email address and press the
"Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you
can do it via email confirmation. If you have
trouble unsubscribing, please send a message
to the list detailing the problem. <br>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class="m_4101084818732292495m_-3395176790875608105mimeAttachmentHeader"></fieldset>
<br>
<pre>______________________________<wbr>_________________
App_rpt-users mailing list
<a class="m_4101084818732292495m_-3395176790875608105moz-txt-link-abbreviated" href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.allstarlin<wbr>k.org</a>
<a class="m_4101084818732292495m_-3395176790875608105moz-txt-link-freetext" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://lists.allstarlink.org/c<wbr>gi-bin/mailman/listinfo/app_rp<wbr>t-users</a>
To unsubscribe from this list please visit <a class="m_4101084818732292495m_-3395176790875608105moz-txt-link-freetext" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://lists.allstarlink.org/c<wbr>gi-bin/mailman/listinfo/app_rp<wbr>t-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </pre>
</blockquote>
</div></div></div>
______________________________<wbr>_________________
App_rpt-users mailing list
<a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.allstarlin<wbr>k.org</a>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/c<wbr>gi-bin/mailman/listinfo/app_rp<wbr>t-users</a>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/c<wbr>gi-bin/mailman/listinfo/app_rp<wbr>t-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
</blockquote></div>
</div>
<fieldset class="m_4101084818732292495mimeAttachmentHeader"></fieldset>
<pre>______________________________<wbr>_________________
App_rpt-users mailing list
<a class="m_4101084818732292495moz-txt-link-abbreviated" href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.<wbr>allstarlink.org</a>
<a class="m_4101084818732292495moz-txt-link-freetext" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a>
To unsubscribe from this list please visit <a class="m_4101084818732292495moz-txt-link-freetext" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </pre>
</blockquote>
</div></div></div><br>______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></blockquote></div><br></div>