<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>Jeremy, You'll have to make sure the radio is programmed to use specific pins that match how your custom cable is made.</div><div id="AppleMailSignature"> Next in simpleusb you need to select usb or usbinvert depending on how the active signal swings. </div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">On my page I have some screen shot examples. Maybe it will help. </div><div id="AppleMailSignature"><a href="http://www.qsl.net/w2ymm/irlp_cable_moto.html">http://www.qsl.net/w2ymm/irlp_cable_moto.html</a></div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">To me it sounds like the cos setting is opposite of what it should be. </div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">Bob W2YMM <br><br>Sent from my iPhone<div>Bob W2YMM </div><div>631-960-1051</div></div><div><br>On May 13, 2017, at 1:52 AM, Jeremy Utley <<a href="mailto:jerutley@gmail.com">jerutley@gmail.com</a>> wrote:<br><br></div><blockquote type="cite"><div><meta http-equiv="Content-Type" content="text/html; charset=us-ascii"><meta name="Generator" content="Microsoft Word 15 (filtered medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri",sans-serif;
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri",sans-serif;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]--><div class="WordSection1"><p class="MsoNormal">Good evening everyone!<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">I’ve had my node number registered (44170) for a few months now, and I’m FINALLY getting around to trying to actually set it up, but am running into some issues. Will start with a run-down of what I’m working with.<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">Radio: Motorola CDM1250 UHF<o:p></o:p></p><p class="MsoNormal">Cabling: Pre-made cables from Marshall, KE6PCV<o:p></o:p></p><p class="MsoNormal">Interface: DMK URI-X<o:p></o:p></p><p class="MsoNormal">Computer: Raspberry Pi 3<o:p></o:p></p><p class="MsoNormal">Installation: RAT RC1 (have also tried the older 1.0.1 DIAL install with same issues)<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">The setup is a simplex node on 446.500 with a tone of 91.5. I have the radio itself detecting the tone via programming, as well as transmitting the same tone. If I do a simple “kerchunk” from my HT (only about 5 feet away from the antenna, thru the wall of my house), the courtesy tone will return back to me. If I transmit for more than a second or so, I do *<b>NOT</b>* get the courtesy tone. The computer also does not seem to receive the DTMF tones when I try to transmit *81 – if I run asterisk -r from the command line and try to transmit tones, I see no indication that the system is hearing those tones. I suspect I have something mis-programmed in the radio – this is the first time I’ve ever tried to program a Motorola radio, and CPS has a lot of options I’m not familiar with. I’ve tried a bunch of google searches, without any luck, so I’m throwing this out to the world. Is there a good run-down step-by-step to programming the CDM1250 I could refer to that I haven’t seen? I’ve tried the batlabs site and a bunch of google searches to no avail.<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">The final goal in this is to use what I learn with this simplex node to rebuild our clubs off-air UHF repeater as an AllStar node. Once that’s working, I’d like to convert our existing 2m repeater to yet another AllStar node, and permanently link them together. But I don’t want to tackle the repeater until I have the simplex node working properly!<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">Any help you guys can give would be greatly appreciated! I am familiar with Linux systems (Linux sys-admin by trade), but not real familiar with Asterisk or AllStar yet.<o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal">Jeremy Utley, NQ0M<o:p></o:p></p><p class="MsoNormal">Iola, KS<o:p></o:p></p></div></div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>App_rpt-users mailing list</span><br><span><a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.allstarlink.org</a></span><br><span><a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br><span></span><br><span>To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"</span><br><span>You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </span></div></blockquote></body></html>