<div dir="ltr">An update - I think I've inadvertently fixed the issue.<div>My radio did not need a lot of drive where I was feeding in my audio. About 70mV @ 1KHz to deviate 3KHz. As a result, the TX pot on the VOTER board was too course when setting the deviation level. I inserted a 4:1 voltage divider to give the pot more resolution. After setting my deviation level, I noticed that the "pulse" noise had almost disappeared on my service monitor (no de-emph). On my radio and with the service monitor (de-emph) it had disappeared.... so it appears that having the voter board TX level set low means that noise can be picked up and put on the audio output.</div><div><br></div><div>Now to move onto the next issue :) </div></div>