<div dir="ltr">That is correct. Unfortunately the Leo Bodnar unit doesn't provide that. <br></div><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Jun 7, 2017 at 2:44 PM, Pierre Martel <span dir="ltr"><<a href="mailto:petem001@gmail.com" target="_blank">petem001@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div>So It would be good, now from what Info I have, I will still need another gps for the nmea and 1 pps to feed the rtcm? </div></div><div class="HOEnZb"><div class="h5"><div><div><br></div><div><br><div class="gmail_quote"><div>Le mer. 7 juin 2017 à 03:46, Joe Moskalski <<a href="mailto:kc2irv@gmail.com" target="_blank">kc2irv@gmail.com</a>> a écrit :<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div>I purchased one of those units about 2 months ago and they work extremely well. I have used it to allow the use of Motorola Maxtrac's and GM300's for simulcast operation by externally injecting a 14.4 MHz reference into the radio from this unit.<br></div>if you want a ready-made solution that will give you GPS locked accuracy and is programmable to just about any frequency you would need than this is it. <br></div><div class="gmail_extra"><br><div class="gmail_quote">On Tue, Jun 6, 2017 at 5:00 PM, Pierre Martel <span><<a href="mailto:petem001@gmail.com" target="_blank">petem001@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div>after reading on gps locked clock and pll found this.</div><div><a href="http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=107&products_id=234" target="_blank">http://www.leobodnar.com/shop/<wbr>index.php?main_page=product_<wbr>info&cPath=107&products_id=234</a><br></div><div><br></div><div><h2 style="font-size:1.4em;margin:0.3em 3px;color:rgb(34,34,34);font-family:Oswald,sans-serif" align="center">Low-jitter GPS-locked precision frequency reference <br>450 Hz to 800 MHz output</h2></div><div><br></div><div>this could be usefull to steer about any radio model no? </div><div><br></div><div>Is it worth the time and money to try with this device? </div><div class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474HOEnZb"><div class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474h5"><div><br><div class="gmail_quote"><div>Le ven. 12 mai 2017 à 17:39, Pierre Martel <<a href="mailto:petem001@gmail.com" target="_blank">petem001@gmail.com</a>> a écrit :<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div>A big thanks Tim. I feel less uneducated ;-) Will have to get a look at this.. </div><div class="gmail_extra"><br><div class="gmail_quote">2017-05-12 12:03 GMT-04:00 Tim Sawyer <span><<a href="mailto:tisawyer@gmail.com" target="_blank">tisawyer@gmail.com</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div>Political Correctness Gone Mad. 😄</div><div><br></div><div>Actually it's Programmable Clock Generator Module. </div><div><br></div><div>K<div><div class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618h5"><br><div class="gmail_quote"><div>On Thu, May 11, 2017 at 8:38 PM Pierre Martel <<a href="mailto:petem001@gmail.com" target="_blank">petem001@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div>I know there is always the one that ask the obvious question but, what is a pcgm?</div><div><br></div><div><br><div class="gmail_quote"><div>Le lun. 8 mai 2017 à 23:10, Tim Sawyer <<a href="mailto:tisawyer@gmail.com" target="_blank">tisawyer@gmail.com</a>> a écrit :<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div>The PCGM were noisy. I know of a case where a ham using one was shut down by the site owner. Seems the PCGM was emitting a interfering signal on high band, around 158 Mhz. </div><div class="gmail_extra"></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, May 8, 2017 at 1:33 PM, Bryan Fields <span><<a href="mailto:bryan@bryanfields.net" target="_blank">bryan@bryanfields.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div>I've been following this with some interest. One of the fundamental issues with the PCGM was the master clock going to the radio was unable to be modulated. This made low frequency signals (PL) distort, and digital PL was even worse. </div><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487AppleMailSignature"><br></div><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487AppleMailSignature">Typically most radios use two point modulation, with modulation on the reference oscillator. When you add an external reference you loose this.</div><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487AppleMailSignature"><br></div><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487AppleMailSignature">Some base stations are designed to do two point modulation even on an external clock, the Quantar for example. This station will even phase lock it's PL and DPL generation if provided a 1 PPS in addition to a clock.</div><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487AppleMailSignature"><br></div><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487AppleMailSignature">If we could inject modulation into the clock generator simulcast performance would vastly improve. I'd be interested to see your design to see if this would be a possibility.</div><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487AppleMailSignature"><br></div><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487AppleMailSignature">Thoughts?</div><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487AppleMailSignature"><br><div style="direction:inherit">--</div><div style="direction:inherit">Bryan Fields</div><div style="direction:inherit">M: <a href="tel:(727)%20409-1194" value="+17274091194" target="_blank">+1-727-409-1194</a></div></div><div><br>On May 8, 2017, at 14:15, Reid Brandon <<a href="mailto:rfpowerguy@yahoo.com" target="_blank">rfpowerguy@yahoo.com</a>> wrote:<br><br></div><blockquote type="cite"><div><div style="color:#000;background-color:#fff;font-family:times new roman,new york,times,serif;font-size:16px"><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yui_3_16_0_ym19_1_1494266968989_5136">Hi Joe,</div><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yui_3_16_0_ym19_1_1494266968989_5135">I got a page with a pic of a man that rotated around saying DOWNLOAD NOT FOUND.</div><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yui_3_16_0_ym19_1_1494266968989_5184">Try again!?</div><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yui_3_16_0_ym19_1_1494266968989_5186">Tks Reid<br></div><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yui_3_16_0_ym19_1_1494266968989_5134"><span></span></div> <div class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487qtdSeparateBR"><br><br></div><div style="display:block" class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yahoo_quoted"> <div style="font-family:times new roman,new york,times,serif;font-size:16px"> <div style="font-family:HelveticaNeue,Helvetica Neue,Helvetica,Arial,Lucida Grande,sans-serif;font-size:16px"><span> <div><font size="2" face="Arial"> On Sunday, May 7, 2017 12:25 PM, Pierre Martel <<a href="mailto:petem001@gmail.com" target="_blank">petem001@gmail.com</a>> wrote:<br></font></div> <br><br> </span><div class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487y_msg_container"><div id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yiv9395446301"><div><span><div>I am very interrested in all this project. My email is VE2PF @ VE2MRC dot com!<div><br clear="none"></div><div>what radio did you used for the project? </div><div><br clear="none"></div><div>Thanks for sharing!</div><div><br clear="none"></div><div>Pierre</div><div>VE2PF</div><div><br clear="none"></div></div></span><div class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yiv9395446301gmail_extra"><br clear="none"><div class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yiv9395446301yqt9077031820" id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yiv9395446301yqtfd60759"><div class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yiv9395446301gmail_quote"><span>2017-05-07 12:32 GMT-04:00 Kevin Custer <span><<a rel="nofollow" shape="rect" href="mailto:kuggie@kuggie.com" target="_blank">kuggie@kuggie.com</a>></span>:<br clear="none"></span><blockquote class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yiv9395446301gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span>Joe,<br clear="none">
<br clear="none">
Why not consider do it as an article for Repeater Builder?<br clear="none">
<br clear="none">
Thanks,<br clear="none">
Kevin<span class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yiv9395446301im m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yiv9395446301HOEnZb"><br clear="none">
<br clear="none">
<br clear="none">
On 5/7/2017 3:13 AM, Joe Moskalski wrote:<br clear="none">
</span><blockquote class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yiv9395446301gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
I wanted to throw this email out to the group for all those who want to simulcast with the RTCM. For those who don't know, in order to make the RTCM suitable for simulcast you must have a more accurate 9.6 MHz clock for the RTCM in order to ensure the audio sounds acceptable in the overlap areas. I did this a few months ago using 9.6 MHz OCXO's. This worked reasonably well. Not as well as I would have liked but the system was very usable, but of course I wanted it to be better. Since the PCGM (Programmable Clock Generation Module) is no longer available, I decided to roll my own as some say.<br clear="none">
I created a PLL circuit that can accept a 10 MHz, 1 MHz or 100 KHz reference input and produce a phase locked 9.6 MHz out for the RTCM. I have been testing this over the past few days and it has made an great improvement in the audio quality in the overlap. The quality of the audio in the overlap areas sounds very, very good, it's very similar to what I expect to hear in commercial simulcast systems. My circuit is heavily based off of an old Motorola MSF5000 HSO PLL circuit that I was able to adapt and modify to my needs. There are other uses for this circuit that make it attractive for simulcasting but I wont get into them here. I am will to share my schematic and bill of materials (digikey) with anyone. Please send me an email and I will be willing to share all of my information on the project.<br clear="none">
</blockquote>
<br clear="none"></span><div class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yiv9395446301HOEnZb"><div class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yiv9395446301h5"><span>
______________________________ _________________<br clear="none">
App_rpt-users mailing list<br clear="none">
<a rel="nofollow" shape="rect" href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.allstarlin k.org</a><br clear="none">
<a rel="nofollow" shape="rect" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users</a><br clear="none">
<br clear="none"></span>
To unsubscribe from this list please visit <a rel="nofollow" shape="rect" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<span><br clear="none">
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </span></div></div></blockquote></div><br clear="none"></div></div></div></div><span><div class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yqt9077031820" id="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153m_-8108346821654717487yqtfd81137">______________________________<wbr>_________________<br clear="none">App_rpt-users mailing list<br clear="none"><a shape="rect" href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.<wbr>allstarlink.org</a><br clear="none"><a shape="rect" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br clear="none"><br clear="none">To unsubscribe from this list please visit <a shape="rect" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users </a>and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br clear="none">You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </div><br><br></span></div> </div> </div> </div></div></div></blockquote><span><blockquote type="cite"><div><span>______________________________<wbr>_________________</span><br><span>App_rpt-users mailing list</span><br><span><a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.<wbr>allstarlink.org</a></span><br><span><a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a></span><br><span></span><br><span>To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"</span><br><span>You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </span></div></blockquote></span></div><br>______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></blockquote></div><br><br clear="all"><div><br></div></div><div class="gmail_extra">-- <br><div class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618m_3102365714191421637m_6818541321445904471m_6107181112231900153gmail_signature" data-smartmail="gmail_signature"><div><div><div><div>--<br></div><div>Tim</div></div></div></div></div>
</div>
______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </blockquote></div></div>
______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </blockquote></div></div></div></div><span class="m_-3730530226841041785m_-3442946101734368403m_-1324000776939065474m_213078590243318231m_-2453780307506425618HOEnZb"><font color="#888888"><div>-- <br></div><div data-smartmail="gmail_signature"><div><div><div><div>--<br></div><div>Tim</div></div></div></div></div>
</font></span><br>______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></blockquote></div><br></div>
</blockquote></div></div>
</div></div><br>______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></blockquote></div><br></div>
______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </blockquote></div></div></div>
</div></div><br>______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></blockquote></div><br></div>