<p dir="ltr">If asterisk is not running, use asterisk -vvvcd</p>
<p dir="ltr">Sent via smoke signal (Verizon)</p>
<div class="quote">On Aug 30, 2017 11:05 PM, Bob <<a href="mailto:k6ecm1@gmail.com">k6ecm1@gmail.com</a>> wrote:<br type="attribution"><blockquote class="quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">When tried again<br>
<br>
xxxxxxx:~# asterisk -rvvv<br>
Asterisk 1535, Copyright (C) 1999 - 2008 Digium, Inc. and others.<br>
Created by Mark Spencer <<a href="mailto:markster@digium.com">markster@digium.com</a>><br>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for<br>
detail s.<br>
This is free software, with components licensed under the GNU General Public<br>
License version 2 and other licenses; you are welcome to redistribute it<br>
under<br>
certain conditions. Type 'core show license' for details.<br>
==============================<wbr>==============================<wbr>=============<br>
Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)<br>
<br>
<br>
<br>
-----Original Message-----<br>
From: Bob [mailto:<a href="mailto:k6ecm1@gmail.com">k6ecm1@gmail.com</a>]<br>
Sent: Wednesday, August 30, 2017 8:01 PM<br>
To: 'Users of Asterisk app_rpt'<br>
Subject: RE: [App_rpt-users] RAT_rc1 on Pi3 a no joy<br>
<br>
<br>
Verbosity was 0 and is now 3<br>
[Aug 30 19:59:55] NOTICE[655]: app_rpt.c:22032 rpt_master: RPT thread<br>
restarted on 1901<br>
[Aug 30 19:59:55] WARNING[655]: app_rpt.c:22044 rpt_master: rpt_thread<br>
restarted on node 1901<br>
-- Re-Loading config for repeater 1901<br>
-- rpt (Rx) initiating call to Radio/usb on Radio/usb<br>
== Set device 1-1.2:1.0 to usb<br>
[Aug 30 19:59:55] WARNING[693]: chan_usbradio.c:1744 hidthread: File<br>
usbradio_tune_usb.conf not found, device usb using default parameters.<br>
xxxxxxx*CLI><br>
Disconnected from Asterisk server<br>
Executing last minute cleanups<br>
<br>
-----Original Message-----<br>
From: App_rpt-users [mailto:<a href="mailto:app_rpt-users-bounces@lists.allstarlink.org">app_rpt-users-bounces@<wbr>lists.allstarlink.org</a>] On<br>
Behalf Of Steve Zingman<br>
Sent: Wednesday, August 30, 2017 7:55 PM<br>
To: <a href="mailto:app_rpt-users@lists.allstarlink.org">app_rpt-users@lists.<wbr>allstarlink.org</a><br>
Subject: Re: [App_rpt-users] RAT_rc1 on Pi3 a no joy<br>
<br>
rename usbradio_tune_usb.conf to usbradio_tune_usb.conf.save and see<br>
what happens.<br>
Check modules.conf for only the proper channel driver loaded.<br>
<br>
Steve<br>
<br>
On 08/30/2017 10:50 PM, Bob wrote:<br>
> Bob here, not out of the woods quite yet.<br>
><br>
> I'm replacing a private node computer with a RPi3. I've started with<br>
copying<br>
> over the /etc/asterisk/*.conf files. Asterisk is crashing on me at regular<br>
> intervals. Here are the errors I'm receiving. Each time the message<br>
> "--Re-loadign config for repeater..." occurs seems to correspond with the<br>
> green light going solid instead of pulsing.<br>
><br>
> Any ideas are appreciated.<br>
><br>
> Thanks,<br>
> Bob<br>
><br>
> Verbosity was 0 and is now 3<br>
> [Aug 30 19:43:52] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread<br>
> restarted on 1901<br>
> [Aug 30 19:43:52] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread<br>
> restarted on node 1901<br>
> -- Re-Loading config for repeater 1901<br>
> -- rpt (Rx) initiating call to Radio/usb on Radio/usb<br>
> == Set device 1-1.2:1.0 to usb<br>
> [Aug 30 19:43:52] WARNING[794]: chan_usbradio.c:1743 hidthread: Loaded<br>
> parameter s from usbradio_tune_usb.conf for<br>
> device usb .<br>
> [Aug 30 19:43:54] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread<br>
> restarted on 1901<br>
> [Aug 30 19:43:54] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread<br>
> restarted on node 1901<br>
> -- Re-Loading config for repeater 1901<br>
> -- rpt (Rx) initiating call to Radio/usb on Radio/usb<br>
> == Set device 1-1.2:1.0 to usb<br>
> [Aug 30 19:43:54] WARNING[796]: chan_usbradio.c:1743 hidthread: Loaded<br>
> parameter s from usbradio_tune_usb.conf for<br>
> device usb .<br>
> [Aug 30 19:43:56] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread<br>
> restarted on 1901<br>
> [Aug 30 19:43:56] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread<br>
> restarted on node 1901<br>
> -- Re-Loading config for repeater 1901<br>
> -- rpt (Rx) initiating call to Radio/usb on Radio/usb<br>
> == Set device 1-1.2:1.0 to usb<br>
> [Aug 30 19:43:56] WARNING[798]: chan_usbradio.c:1743 hidthread: Loaded<br>
> parameter s from usbradio_tune_usb.conf for<br>
> device usb .<br>
> [Aug 30 19:43:58] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread<br>
> restarted on 1901<br>
> [Aug 30 19:43:58] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread<br>
> restarted on node 1901<br>
> -- Re-Loading config for repeater 1901<br>
> -- rpt (Rx) initiating call to Radio/usb on Radio/usb<br>
> == Set device 1-1.2:1.0 to usb<br>
> [Aug 30 19:43:58] WARNING[800]: chan_usbradio.c:1743 hidthread: Loaded<br>
> parameter s from usbradio_tune_usb.conf for<br>
> device usb .<br>
> [Aug 30 19:44:00] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread<br>
> restarted on 1901<br>
> [Aug 30 19:44:00] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread<br>
> restarted on node 1901<br>
> -- Re-Loading config for repeater 1901<br>
> -- rpt (Rx) initiating call to Radio/usb on Radio/usb<br>
> == Set device 1-1.2:1.0 to usb<br>
> [Aug 30 19:44:00] WARNING[802]: chan_usbradio.c:1743 hidthread: Loaded<br>
> parameter s from usbradio_tune_usb.conf for<br>
> device usb .<br>
> [Aug 30 19:44:02] ERROR[764]: app_rpt.c:22027 rpt_master: Continual RPT<br>
> thread restarts, killing Asterisk<br>
><br>
> -----Original Message-----<br>
> From: App_rpt-users [mailto:<a href="mailto:app_rpt-users-bounces@lists.allstarlink.org">app_rpt-users-bounces@<wbr>lists.allstarlink.org</a>]<br>
On<br>
> Behalf Of Steve Zingman<br>
> Sent: Wednesday, August 30, 2017 8:12 AM<br>
> To: <a href="mailto:app_rpt-users@lists.allstarlink.org">app_rpt-users@lists.<wbr>allstarlink.org</a><br>
> Subject: Re: [App_rpt-users] RAT_rc1 on Pi3 a no joy<br>
><br>
> Oh what a surprise, a PS issue with a Pi. ;)<br>
> do the following as root:<br>
> touch /etc/asterisk/firsttime<br>
> firsttime<br>
><br>
> Or, if all you want to do is set the TZ.<br>
> dpkg-reconfigure tzdata<br>
><br>
><br>
> On 8/30/2017 11:08 AM, Bob Pyke wrote:<br>
>> Powersupply (sigh!!!)<br>
>><br>
>> Asterisk is happy. Is ther a first time script for setting up time zone<br>
or<br>
> is this manual?<br>
>> Thanks,<br>
>> Bob<br>
>><br>
>> Sent from my iPhone<br>
>><br>
>>> On Aug 30, 2017, at 5:50 AM, Steve Zingman <<a href="mailto:szingman@msgstor.com">szingman@msgstor.com</a>> wrote:<br>
>>><br>
>>> We have not had any reports of crashing on a RPI3 I have a test node<br>
> built on a RPI3 that I use to verify proper operation.<br>
>>> The ssh file is at /etc/ssh/sshd_config<br>
>>><br>
>>> 73, Steve N4IRS<br>
>>><br>
>>>> On 8/30/2017 8:45 AM, Bob Pyke wrote:<br>
>>>> Not able to get past the Linux continual crashing and rebooting. The<br>
> experience is quite similar on two RPi3s. It does not crash on an RPi2,<br>
> which has allowed me to poke around this build a bit. I can't locate the<br>
ssh<br>
> file for edit. This build does not seem to follow the docs.Allstarlink<br>
> website for file name and location.<br>
>>>> The original RPi build seems to work on both variants of RPi.<br>
>>>><br>
>>>> Thanks,<br>
>>>> Bob<br>
>>>><br>
>>>> Sent from my iPhone<br>
>>>><br>
>>>>>> On Aug 29, 2017, at 9:42 PM, Bryan Fields <<a href="mailto:Bryan@bryanfields.net">Bryan@bryanfields.net</a>><br>
> wrote:<br>
>>>>>> On 8/30/17 12:41 AM, Bob Pyke wrote:<br>
>>>>>> Asterisk does not start.<br>
>>>>> What do the logs say? Can you run asterisk in the foreground and see<br>
> what it<br>
>>>>> outputs as errors?<br>
>>>>><br>
>>>>> --<br>
>>>>> Bryan Fields<br>
>>>>><br>
>>>>> 727-409-1194 - Voice<br>
>>>>> <a href="http://bryanfields.net">http://bryanfields.net</a><br>
>>>>> ______________________________<wbr>_________________<br>
>>>>> App_rpt-users mailing list<br>
>>>>> <a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
>>>>> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
>>>>><br>
>>>>> To unsubscribe from this list please visit<br>
> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and<br>
> scroll down to the bottom of the page. Enter your email address and press<br>
> the "Unsubscribe or edit options button"<br>
>>>>> You do not need a password to unsubscribe, you can do it via email<br>
> confirmation. If you have trouble unsubscribing, please send a message to<br>
> the list detailing the problem.<br>
>>>> ______________________________<wbr>_________________<br>
>>>> App_rpt-users mailing list<br>
>>>> <a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
>>>> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
>>>><br>
>>>> To unsubscribe from this list please visit<br>
> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and<br>
> scroll down to the bottom of the page. Enter your email address and press<br>
> the "Unsubscribe or edit options button"<br>
>>>> You do not need a password to unsubscribe, you can do it via email<br>
> confirmation. If you have trouble unsubscribing, please send a message to<br>
> the list detailing the problem.<br>
>>> ______________________________<wbr>_________________<br>
>>> App_rpt-users mailing list<br>
>>> <a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
>>> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
>>><br>
>>> To unsubscribe from this list please visit<br>
> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and<br>
> scroll down to the bottom of the page. Enter your email address and press<br>
> the "Unsubscribe or edit options button"<br>
>>> You do not need a password to unsubscribe, you can do it via email<br>
> confirmation. If you have trouble unsubscribing, please send a message to<br>
> the list detailing the problem.<br>
>> ______________________________<wbr>_________________<br>
>> App_rpt-users mailing list<br>
>> <a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
>> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
>><br>
>> To unsubscribe from this list please visit<br>
> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and<br>
> scroll down to the bottom of the page. Enter your email address and press<br>
> the "Unsubscribe or edit options button"<br>
>> You do not need a password to unsubscribe, you can do it via email<br>
> confirmation. If you have trouble unsubscribing, please send a message to<br>
> the list detailing the problem.<br>
><br>
> ______________________________<wbr>_________________<br>
> App_rpt-users mailing list<br>
> <a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
><br>
> To unsubscribe from this list please visit<br>
> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and<br>
> scroll down to the bottom of the page. Enter your email address and press<br>
> the "Unsubscribe or edit options button"<br>
> You do not need a password to unsubscribe, you can do it via email<br>
> confirmation. If you have trouble unsubscribing, please send a message to<br>
> the list detailing the problem.<br>
><br>
> ______________________________<wbr>_________________<br>
> App_rpt-users mailing list<br>
> <a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
><br>
> To unsubscribe from this list please visit<br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and<br>
scroll down to the bottom of the page. Enter your email address and press<br>
the "Unsubscribe or edit options button"<br>
> You do not need a password to unsubscribe, you can do it via email<br>
confirmation. If you have trouble unsubscribing, please send a message to<br>
the list detailing the problem.<br>
<br>
______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
<br>
To unsubscribe from this list please visit<br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and<br>
scroll down to the bottom of the page. Enter your email address and press<br>
the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email<br>
confirmation. If you have trouble unsubscribing, please send a message to<br>
the list detailing the problem.<br>
<br>
______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </blockquote></div>