<div dir="ltr">in rpt.conf, (cut and paste ) the [functions] stanza to a seperate file labeled commands.include then delete or comment out all the commands in the stanza and replace with this line "#include commands.include" THEN put all the commands YOU want above and beyond what is required to be standard across everyones nodes 1-5 ilink etc. in the commands.include file. Use (winSCP) to copy the commands.include file to all your nodes and edit each nodes rpt.conf stanza to have the line in [functions] be #include commands.include. For each new system you just you build just add YOUR commands.include file and it will have all the same commands as the others. <div><br></div><div><br></div><div>from my rpt.conf</div><div>..........</div><div><div>outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - 2> /tmp/stream.status | /usr/bin/ezstream -qvc /etc/ezstream.xml</div><div><br></div><div>[functions]</div><div>#include commands.include</div><div>#include /etc/asterisk/local/localcmds.include</div><div><br></div><div>[morse]</div><div>speed=20</div></div><div>............................</div><div><br></div><div><br></div><div>and a copy of a generic commands.include file for you to cut and paste if you wish.</div><div><div><br></div><div>root@N8THN:/etc/asterisk# cat commands.include</div></div><div><br></div><div><div>;commands.include</div><div>;Command common acrossed all nodes</div><div>;single digit public commands</div><div><br></div><div>0=autopatchdn</div><div>1=ilink,1 ; Disconnect Link</div><div>2=ilink,2 ; Connect Link MOnitor Only</div><div>3=ilink,3 ; Connect Link Transieve</div><div>4=ilink,4 ; Enter Command Mode on another Node</div><div>5=macro,1 ; Macro Prefix</div><div>6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up</div><div><br></div><div>;double digit public commands</div><div>70=ilink,5 ; System Status</div><div>71=ilink,6 ; Disconnect all Links</div><div>72=ilink,7 ; Play Last Node to Key Up</div><div>73=ilink,15 ; FULL system Status - all nodes</div><div>74=ilink,16 ; Reconnect disconnected links disconnected with disconnect all links command</div><div>75=ilink,8 ; Connect Link LOCAL monitor only</div><div>76=</div><div>77=</div><div>78=</div><div>79=</div><div>80=status,11 ;Force ID LOCAL ONLY</div><div>81=status,12 ; GIve Time of Day LOCAL ONLY</div><div>82=status,3 ; Give Software Verison</div><div>83=status,5 ; Last DTMF User</div><div>84=cop,32 ; DTMF TEST</div><div>85=</div><div>86=</div><div>87=</div><div>88=cop,55 ;Parrot Once if parrot mode is disabled</div><div>89=autopatchup,context=command_process,noct=1,farenddisconnect=1,dialtime=7000,quiet=1; Command Processing</div><div>99=cop,6 ; ptt phone mode</div><div><br></div><div>; Triple digit control operator /owner codes</div><div>900=cop,3 ;disable system</div><div>901=cop,2 ;enable system</div><div>903=cop,1 ;System warm boot</div><div>902=</div><div>903=</div><div>904=cop,4 ;Test Tone On/Off</div><div>905=cop,5 ;dump system variables</div><div>906=</div><div>907=cop,7 ;Time out timer enable</div><div>908=cop,8 ;Time out timer disable</div><div>909=cop,9 ;Autopatch enable</div><div><br></div><div>910=cop,10 ;Autopatch disable</div><div>911=cop,11 ;Link enable</div><div>912=cop,12 ;Link disable</div><div>913=cop,13 ;Query System State</div><div>914=cop,14 ;Change System State</div><div>915=cop,15 ;Scheduler Enable</div><div>916=cop,16 ;Scheduler Disable</div><div>917=cop,17 ;User functions (time, id, etc) enable</div><div>918=cop,18 ;User functions (time, id, etc) disable</div><div>919=cop,19 ;Select alternate hang timer</div><div><br></div><div>920=cop,20 ;Select standard hang timer</div><div>921=cop,21 ;Enable Parrot Mode</div><div>922=cop,22 ;Disable Parrot Mode</div><div>923=cop,23 ;Birdbath (Current Parrot Cleanup/Flush)</div><div>924=cop,24 ;Flush all telemetry</div><div>925=cop,25 ;Query !!!!last node un-keyed!!!!</div><div>926=cop,26 ;Query all nodes keyed/unkeyed</div><div>927=cop,27 ;Reset DAQ minimum on a pin</div><div>928=cop,28 ;Reset DAQ maximum on a pin</div><div>929=</div><div><br></div><div>930=cop,30 ;Recall Memory Setting in Attached Xcvr</div><div>931=cop,31 ;Channel Selector for Parallel Programmed Xcvr</div><div>932=</div><div>933=cop,33 ;Local Telemetry Output Enable</div><div>934=cop,34 ;Local Telemetry Output Disable</div><div>935=cop,35 ;Local Telemetry Output on Demand</div><div>936=cop,36 ;Foreign Link Local Output Path Enable</div><div>937=cop,37 ;Foreign Link Local Output Path Disable</div><div>938=cop,38 ;Foreign Link Local Output Path Follows Local Telemetry</div><div>939=cop,39 ;Foreign Link Local Output Path on Demand</div><div><br></div><div>940=cop,40 ;IRLP announce Enable</div><div>941=cop,41 ;IRLP announce Disable</div><div>942=cop,42 ;Echolink announce node # only</div><div>943=cop,43 ;Echolink announce node Callsign only</div><div>944=cop,44 ;Echolink announce node # & Callsign</div><div>945=cop,45 ;Link Activity timer enable</div><div>946=cop,46 ;Link Activity timer disable</div><div>947=cop,47 ;Reset "Link Config Changed" Flag</div><div>948=cop,48 ;Send Page-Tone specs separated by ( )</div><div>949=cop,49 ;Disable incoming connections (control state NOICE)</div><div><br></div><div>950=cop,50 ;Enable incoming connections (control state NOICD)</div><div>951=cop,51 ;Enable sleep mode</div><div>952=cop,52 ;Disable sleep mode</div><div>953=cop,53 ;Wake up from sleep</div><div>954=cop,54 ;Go to sleep</div><div>955=cop,60 ;SEND MDC-1200 Burst</div><div>956=cop,56 ;Rx CTCSS Enable</div><div>957=cop,57 ;Rx CTCSS Disable</div><div>958=cop,58 ;Tx CTCSS On Input only Enable</div><div>959=cop,59 ;Tx CTCSS On Input only Disable</div><div><br></div><div>; 98 series up to local nodes</div></div><div><br></div><div><br></div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Fri, Jan 5, 2018 at 3:31 AM, larry <span dir="ltr"><<a href="mailto:larry@n7fm.com" target="_blank">larry@n7fm.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Can some one point me to a listing of every available command defined that can used with Allstar.<br>
<br>
I am have a heck of a time trying to configure my nodes so everything is all the same commands on all my nodes..<br>
It seems whenever there is a different version other than the 1-5 ilink commands there is no standard numbering system between versions or platforms.<br>
Realizing that it is up to me to standardize my own system I am about to start from scratch eliminating all the jumble.<br>
It would certainly be helpful if there was a COMPLETE command list with explanations of their functions.<br>
<br>
Larry - N7FM<br>
______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.allstarlin<wbr>k.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/c<wbr>gi-bin/mailman/listinfo/app_rp<wbr>t-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/c<wbr>gi-bin/mailman/listinfo/app_rp<wbr>t-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </blockquote></div><br><br clear="all"><div><br></div>-- <br><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><br></div><div dir="ltr"><div>Nathan Hardman</div><div><a href="mailto:nhardman1428@gmail.com" target="_blank">nhardman1428@gmail.com</a></div><a href="mailto:N8THN@ARRL.NET" target="_blank">N8THN@ARRL.NET</a></div><div dir="ltr"><br><div><br></div></div></div></div></div>
</div>