<div dir="ltr">Just ont thing those test were made when both of my nodes are linked.<div><br></div><div>Just did another test and when unlinked both echolink and iaxrpt transmission wont make multiple hungup message.</div><div><br></div><div>they connect by the startup_macro command and the macro is permanent link (03) </div><div><br></div><div>.</div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">2018-01-21 18:43 GMT-05:00 Pierre Martel <span dir="ltr"><<a href="mailto:petem001@gmail.com" target="_blank">petem001@gmail.com</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">I have my nodes 27821 and 28739, they use to run on an old P4.<div><br></div><div>The nodes are on UsbRadio and the levels have been adjusted on with an IFR1500 so they are inline. </div><div><br></div><div>I switched computer yesterday and now I use a Proliant G5P computer on Stretch. </div><div><br></div><div>Got some help to make it run but all seem prety well. I also run chan_echolink with chan_usbradio.</div><div><br></div><div>the drive is aN SSD, got 8 gig of ram and the cpu is an 8 core xeon at 2.2 ghz. </div><div><br></div><div>I also use the Raid controler to have a 1 TB raid 1 array. </div><div><br></div><div>If I run the GUI ( Mate) or only CLI ( init level 3) it still the same. I tested on the same usb bus or different usb bus and it make no difference</div><div><br></div><div>here is the outpu of lsusb</div><div><br></div><div><div> lsusb</div><div>Bus 005 Device 002: ID 03f0:1027 Hewlett-Packard Virtual keyboard and mouse</div><div>Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub</div><div>Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub</div><div>Bus 004 Device 010: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller</div><div>Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub</div><div>Bus 003 Device 014: ID 0d8c:013a C-Media Electronics, Inc.</div><div>Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub</div><div>Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub</div><div>Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub</div></div><div><br></div><div>I use 2 URI. they are not modded fob. </div><div><br></div><div>I switched usb cable. </div><div><br></div><div>I used iaxrpt to connect to both repeater and I got that in the log of asterisk:</div><div><br></div><div><div> WARNING[9017]: chan_iax2.c:921 jb_warning_output: Resyncing the jb. last_delay -98, this delay 2918, threshold 1164, new offset -2918</div></div><div><br></div><div>and we receive a lot of hungup message for only one short ptt:</div><div><br></div><div><div> -- Hungup 'DAHDI/pseudo-1302878576'</div><div> -- Hungup 'DAHDI/pseudo-1313783111'</div><div> -- Hungup 'DAHDI/pseudo-1265694909'</div><div> -- Hungup 'DAHDI/pseudo-1223961614'</div><div> -- Hungup 'DAHDI/pseudo-1745973833'</div><div> -- Hungup 'DAHDI/pseudo-311499195'</div><div> -- Hungup 'DAHDI/pseudo-1573868247'</div><div> -- Hungup 'DAHDI/pseudo-56935586'</div><div> -- Hungup 'DAHDI/pseudo-267958833'</div><div> -- Hungup 'DAHDI/pseudo-580580533'</div><div> -- Hungup 'DAHDI/pseudo-1976922523'</div></div><div><br></div><div>Even with an echolink connection there are multiple Hungup 'DAHDI/pseudo messages in the log for only one tx.</div><div><br></div><div>Anyone can help?</div><div><br></div><div><br></div><div><br></div><div><br></div></div>
</blockquote></div><br></div>