<div dir="ltr">First off, the PTT should not key with no radio connected using usbradio.conf/discriminator audio)<div><br></div><div>If you are using usbradio.conf, you will want to run radio-tune-menu </div><div>option 2 (Auto-Detect Rx Noise Level Value (with no carrier) --- when you connect it to the radio, etc...</div><div>maybe it's picking up some noise/signal somehow... I've never had the dsp option in usbradio.conf trigger anything like that without a radio connected, is this in a high RF environment maybe?</div><div><br></div><div>I assume your usbradio.conf file looks like this:</div><div><br></div><div>
<span></span>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>hdwtype=0</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>rxboost=1</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>txboost=1</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>rxctcssrelax=1</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>txctcssdefault=67.0</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>rxctcssfreqs=162.2</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>txctcssfreqs=67.0</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>;rxctcssoverride=0</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>carrierfrom=dsp</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>ctcssfrom=dsp</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>rxdemod=flat</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>txprelim=yes</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>txlimonly=no</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>plfilter=yes</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>txtoctype=notone</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>txmixa=composite</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>txmixb=no</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>invertptt=0</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>duplex=1</b></span></p>
<p class="gmail-p1" style="margin:0px;font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:normal;font-family:"Courier New";color:rgb(244,244,244);background-color:rgba(0,0,0,0.85)"><span class="gmail-s1" style="font-variant-ligatures:no-common-ligatures"><b>rxondelay=0</b></span></p>
<br></div><div><br></div><div><br></div><div>Mark</div><div><br></div></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div>**** North West Hub Allstar <a href="http://www.markjohnston.us/nwhub" target="_blank">Node 2295</a> ****</div><div><br></div><div>"Got Root?"</div><div><br></div><div><span style="font-family:verdana"><font size="2">How many software engineers does it take to change a light bulb?</font></span></div><div><span style="font-family:verdana;color:rgb(52,52,52)"><b><font size="2">None. It's a hardware problem.</font></b></span></div><div><br></div><div>The best way to accelerate a computer running Windows is at 9.81 m/s².</div><div><br></div><div><span style="line-height:31px"><i style="line-height:15px"><b><u><i><span style="font-size:small"><font color="#FF0000">"I get paid to support Windows, I use Linux to get work done."</font></span></i></u></b></i></span><br><br></div></div></div></div></div></div></div>
<br><div class="gmail_quote">On Sun, Feb 18, 2018 at 7:27 PM, ARS W5OMR <span dir="ltr"><<a href="mailto:ars.w5omr@gmail.com" target="_blank">ars.w5omr@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">I'm at my wit's end...<br>
Somewhere between asterisk -Rcvvvv and modules.conf and 'usbradio.conf<br>
... ARRRHGGG!<br>
<br>
I know, you've been there, too - I've not had this stuff up and<br>
running for over 3 years, I've forgotten some of the most important<br>
things I knew...<br>
Steve/N4IRS, great guy that he is, helped me tremendously the other<br>
day and all was 'ok'. It wasn't quite done, but at the time, I felt<br>
confident it was merely minor tweeking... I still had to make an<br>
interface cable for the repeater to the URIx but, even without a radio<br>
connected, I was connecting (monitor mode) to other nodes. That was<br>
cool! It was PROGRESS!<br>
But, the red LED on the URI stayed on. Even though there wasn't a<br>
radio connected, I knew it wasn't supposed to be on. That meant it<br>
was sending the 'xmit' signal out. Hell, even in the node status,<br>
it's saying it's timing out and I don't know where else to tell<br>
allstar that it's not even receiving a signal. First thing I did, was<br>
modify usbradio.conf and inverted PTT and that shut it off. The<br>
voltage on the output of the URI (Pins 1 (PTT) and 13 (GND)) 'floats'<br>
somewhere around 0.65 to 0.72v, but when it's transmitting, it is<br>
pulled DOWN to 0v. That's opposite of inverting PTT from 0 to 1.<br>
(head scratch)<br>
<br>
This is on a Raspberry Pi3 connecting to a Motorola R100 repeater.<br>
<br>
Here are the .conf files, if someone wouldn't mind having a gander....<br>
<br>
<br>
iax.conf<br>
----------<br>
<br>
; Inter-Asterisk eXchange driver definition<br>
; <a href="http://docs.allstarlink.org/drupal/node/15" rel="noreferrer" target="_blank">http://docs.allstarlink.org/<wbr>drupal/node/15</a><br>
<br>
; ulaw, alaw, GSM and ADPCM should only be used,<br>
; the rest of the standard Asterisk codecs<br>
; (speex, ilbc, lpc10, etc) should be avoided.<br>
<br>
; The ulaw and alaw codecs have the best audio quality,<br>
; followed by ADPCM, and lastly GSM,<br>
; Bandwidth used is in the reverse order to audio quality.<br>
; GSM uses the least bandwidth, and alaw/ulaw the most.<br>
<br>
; CODEC AUDIO QUALITY BANDWIDTH (including IP and<br>
Ethernet headers)<br>
; ULAW best 87 kbps<br>
; ADPCM good 55 kbps<br>
; GSM mediocre 36 kbps<br>
<br>
<br>
[general]<br>
bindport = 4569 ; bindport and bindaddr may be specified<br>
; NOTE: bindport must be specified BEFORE<br>
; bindaddr or may be specified on a specific<br>
; bindaddr if followed by colon and port<br>
; (e.g. bindaddr=<a href="http://192.168.0.1:4569" rel="noreferrer" target="_blank">192.168.0.1:4569</a>)<br>
<br>
; bindaddr = 192.168.0.1 ; more than once to bind to multiple<br>
; addresses, but the first will be the<br>
; default<br>
<br>
disallow = all ; The permitted codecs for outgoing connections<br>
; Audio Quality Bandwidth<br>
allow = ulaw ; best 87 kbps<br>
allow = adpcm ; good 55 kbps<br>
allow = gsm ; medicore 36 kbps<br>
<br>
jitterbuffer = yes<br>
forcejitterbuffer = yes<br>
dropcount = 2<br>
maxjitterbuffer = 4000<br>
maxjitterinterps = 10<br>
resyncthreshold = 1000<br>
maxexcessbuffer = 80<br>
minexcessbuffer = 10<br>
jittershrinkrate = 1<br>
tos = 0x1E<br>
autokill = yes<br>
delayreject = yes<br>
; iaxthreadcount = 30<br>
; iaxmaxthreadcount = 150<br>
<br>
register = <a href="mailto:29655%3Axxxxx@register.allstarlink.org">29655:xxxxx@register.<wbr>allstarlink.org</a> ; This must be changed<br>
to your node number, password<br>
; remove the leading ";"<br>
<br>
; Incoming radio connections<br>
<br>
[radio]<br>
type = user<br>
disallow = all<br>
allow = ulaw<br>
allow = adpcm<br>
allow = gsm<br>
<br>
codecpriority = host<br>
context = radio-secure<br>
transfer = no<br>
<br>
[iaxrpt] ; Connect from iaxrpt Username field<br>
(PC AllStar Client)<br>
type = user ; Notice type is user here <---------------<br>
context = iaxrpt ; Context to jump to in extensions.conf<br>
auth = md5<br>
secret = Your_Secret_Pasword_Here<br>
host = dynamic<br>
disallow = all<br>
allow = ulaw<br>
allow = adpcm<br>
allow = gsm<br>
transfer = no<br>
<br>
[iaxclient] ; Connect from iax client (Zoiper...)<br>
type = friend ; Notice type here is friend <--------------<br>
context = iax-client ; Context to jump to in extensions.conf<br>
auth = md5<br>
secret = Your_Secret_Password_Here<br>
host = dynamic<br>
disallow = all<br>
allow = ulaw<br>
allow = adpcm<br>
allow = gsm<br>
transfer = no<br>
<br>
[allstar-sys]<br>
type = user<br>
context = allstar-sys<br>
auth = rsa<br>
inkeys = allstar<br>
disallow = all<br>
allow = ulaw<br>
<br>
[allstar-public]<br>
type = user<br>
context = allstar-public<br>
auth = md5<br>
secret = allstar<br>
disallow = all<br>
allow = ulaw<br>
allow = gsm<br>
<br>
; The following should be un-commented to support Allstar Autopatch service<br>
; [allstar-autopatch]<br>
; type = peer<br>
; host = <a href="http://register.allstarlink.org" rel="noreferrer" target="_blank">register.allstarlink.org</a><br>
; username = <One of the Node numbers on this server><br>
; secret = <The node password for the above node><br>
; auth = md5<br>
; disallow = all<br>
; allow = ulaw<br>
; transfer = no<br>
==============================<wbr>========<br>
<br>
rpt.conf<br>
---------<br>
; Radio Repeater configuration file (for use with app_rpt)<br>
<br>
; Your Repeater<br>
<br>
<br>
[29655] ; Change this to your assigned node number<br>
<br>
; Must also be enabled in modules.conf<br>
; Rx audio/signalling channel. Choose ONLY 1 per node stanza<br>
<br>
; Enable the selected channel driver in modules.conf !!!<br>
; rxchannel = dahdi/pseudo ; No radio (hub)<br>
; rxchannel = SimpleUSB/usb_1999 ; SimpleUSB<br>
; rxchannel = Pi/1 ; Raspberry Pi PiTA<br>
rxchannel = Radio/usb_29655 ; USBRadio (DSP)<br>
; rxchannel = Dahdi/1 ; PCI Quad card<br>
; rxchannel = Beagle/1 ; BeagleBoard<br>
; rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP<br>
<br>
duplex = 2 ; 0 = Half duplex with no<br>
telemetry tones or hang time.<br>
; Special Case: Full<br>
duplex if linktolink is set to yes.<br>
; This mode is preferred<br>
when interfacing with an external multiport repeater controller.<br>
; Comment out idrecording and idtalkover to suppress IDs also<br>
; 1 = Half duplex with<br>
telemetry tones and hang time. Does not repeat audio.<br>
; This mode is preferred<br>
when interfacing a simplex node.<br>
; 2 = Full Duplex with<br>
telemetry tones and hang time.<br>
; This mode is preferred<br>
when interfacing a repeater.<br>
; 3 = Full Duplex with<br>
telemetry tones and hang time, but no repeated audio.<br>
; 4 = Full Duplex with<br>
telemetry tones and hang time. Repeated audio only when the autopatch<br>
is down.<br>
<br>
linktolink = no ; disables forcing physical half-duplex operation of<br>
main repeater while<br>
; still keeping half-duplex semantics (optional)<br>
<br>
linkmongain = 0 ; Link Monitor Gain adjusts the audio level of<br>
monitored nodes when a signal from another node or the local receiver<br>
is received.<br>
; If linkmongain is set to a negative number the monitored audio will<br>
decrease by the set amount in db.<br>
; If linkmongain set to a positive number monitored audio will<br>
increase by the set amount in db.<br>
; The value of linkmongain is in db. The default value is 0 db.<br>
<br>
erxgain = -3 ; Echolink receive gain adjustment<br>
; Note: Gain is in db-volts (20logVI/VO)<br>
etxgain = 3 ; Echolink transmit gain adjustment<br>
; Note: Gain is in db-volts (20logVI/VO)<br>
;eannmode = 1 ; 1 = Say only node number on<br>
echolink connects (default = 1)<br>
; 2 = say phonetic call sign<br>
only on echolink connects<br>
; 3 = say phonetic call sign<br>
and node number on echolink connects<br>
<br>
;controlstates = controlstates ; system control state stanza<br>
<br>
scheduler = schedule ; scheduler stanza<br>
functions = functions ; Repeater Function stanza<br>
phone_functions = functions ; Phone Function stanza<br>
link_functions = functions ; Link Function stanza<br>
<br>
telemetry = telemetry ; Telemetry stanza<br>
morse = morse ; Morse stanza<br>
wait_times = wait-times ; Wait times stanza<br>
<br>
context = radio ; dialing context for phone<br>
callerid = "Repeater" <0000000000> ; callerid for phone calls<br>
accountcode = RADIO ; account code (optional)<br>
<br>
hangtime = 1000 ; squelch tail hang time (in ms) (optional, default 5<br>
seconds, 5000 ms)<br>
althangtime = 1000 ; longer squelch tail<br>
totime = 300000 ; transmit time-out time (in ms) (optional, default 3<br>
minutes 180000 ms)<br>
<br>
idrecording = |iW5OMR/R ; id recording or morse string<br>
see <a href="http://ohnosec.org/drupal/node/87" rel="noreferrer" target="_blank">http://ohnosec.org/drupal/<wbr>node/87</a><br>
idtalkover = |iW5OMR ; Talkover ID (optional)<br>
default is none see <a href="http://ohnosec.org/drupal/node/129" rel="noreferrer" target="_blank">http://ohnosec.org/drupal/<wbr>node/129</a><br>
idtime = 540000 ; id interval time (in ms) (optional) Default 5<br>
minutes (300000 ms)<br>
politeid = 30000 ; time in milliseconds before ID timer expires to try<br>
and ID in the tail. (optional, default 30000)<br>
<br>
unlinkedct = ct2 ; Send a this courtesy tone when the user unkeys if<br>
the node is not connected to any other nodes. (optional, default is<br>
none)<br>
remotect = ct3 ; remote linked courtesy tone (indicates a remote is in<br>
the list of links)<br>
linkunkeyct = ct8 ; sent when a transmission received over the link unkeys<br>
;nolocallinkct = 0 ; Send unlinkedct instead if another local node is<br>
connected to this node (hosted on the same PC).<br>
<br>
;connpgm = yourconnectprogram ; Disabled. Execute a program you<br>
specify on connect. (default)<br>
; passes 2 command line arguments to your program:<br>
; 1. node number in this stanza (us)<br>
; 2. node number being connected to us (them)<br>
;discpgm = yourdisconnectprogram ; Disabled. Execute a program you<br>
specify on disconnect. (default)<br>
; passes 2 command line arguments to your program:<br>
; 1. node number in this stanza (us)<br>
; 2. node number being disconnected from us (them)<br>
<br>
;lnkactenable = 0 ; Set to 1 to enable the link activity timer.<br>
Applicable to standard nodes only.<br>
<br>
;lnkacttime = 1800 ; Link activity timer time in seconds.<br>
;lnkactmacro = *52 ; Function to execute when link activity timer expires.<br>
;lnkacttimerwarn = 30seconds ; Message to play when the link activity<br>
timer has 30 seconds left.<br>
<br>
;remote_inact_timeout = ; Specifies the amount of time without keying<br>
from the link. Set to 0 to disable timeout. (15 * 60)<br>
;remote_timeout = ; Session time out for remote base. Set to 0 to<br>
disable. (60 * 60)<br>
;remote_timeout_warning_freq = ; 30<br>
;remote_timeout_warning = ; (3 * 60)<br>
<br>
;nounkeyct = 0 ; Set to a 1 to eliminate courtesy tones and associated delays.<br>
<br>
holdofftelem = 1 ; Hold off all telemetry when signal is present on<br>
receiver or from connected nodes<br>
; except when an ID needs to be done and there is a signal coming from<br>
a connected node.<br>
<br>
telemdefault = 1 ; 0 = telemetry output off<br>
; 1 = telemetry output on (default = 1)<br>
; 2 = timed telemetry output<br>
on command execution and for a short time thereafter.<br>
<br>
telemdynamic = 1 ; 0 = disallow users to change<br>
the local telemetry setting with a COP command,<br>
; 1 = Allow users to change<br>
the setting with a COP command. (default = 1)<br>
<br>
;beaconing = 0 ; Send ID regardless of repeater activity (Required in<br>
the UK, but probably illegal in the US)<br>
<br>
parrotmode = 0 ; 0 = Parrot Off (default = 0)<br>
; 1 = Parrot On Command<br>
; 2 = Parrot Always<br>
; 3 = Parrot Once by Command<br>
<br>
parrottime = 1000 ; Set the amount of time in milliseconds<br>
; to wait before parroting what was received<br>
<br>
;rxnotch=1065,40 ; (Optional) Notch a<br>
particular frequency for a specified<br>
; b/w. app_rpt must have been<br>
compiled with<br>
; the notch option<br>
<br>
startup_macro=*982 ; Macro to run at startup (optional)<br>
<br>
nodenames = /var/lib/asterisk/sounds/rpt/<wbr>nodenames ; Point to nodename<br>
sound directory<br>
<br>
; *** Status Reporting ***<br>
<br>
; Uncomment either group following two statpost lines to report the<br>
status of your node to <a href="http://stats.allstarlink.org" rel="noreferrer" target="_blank">stats.allstarlink.org</a><br>
; depending on whether you are running ACID, Debian or Limey Linux.<br>
; The difference is simply where your wget is located.<br>
<br>
; ** For ACID and Debian ***<br>
statpost_program =<br>
/usr/bin/wget,-q,--timeout=15,<wbr>--tries=1,--output-document=/<wbr>dev/null<br>
statpost_url = <a href="http://stats.allstarlink.org/uhandler.php" rel="noreferrer" target="_blank">http://stats.allstarlink.org/<wbr>uhandler.php</a> ; Status updates<br>
<br>
; ** For Limey Linux **<br>
;statpost_program =<br>
/bin/wget,-q,--timeout=15,--<wbr>tries=1,--output-document=/<wbr>dev/null<br>
;statpost_url = <a href="http://stats.allstarlink.org/uhandler.php" rel="noreferrer" target="_blank">http://stats.allstarlink.org/<wbr>uhandler.php</a> ; Status updates<br>
<br>
[functions]<br>
<br>
; Prefix Functions<br>
; *1 Disconnect Link<br>
; *2 Monitor Link<br>
; *3 Connect Link<br>
; *4 Command Mode<br>
; *5 Macros<br>
; *6 User Functions<br>
; *7 Connection Status/Functions<br>
; *8 User Functions<br>
; *9 User Functions<br>
; *0 User Functions<br>
<br>
; *A User Functions<br>
; *B User Functions<br>
; *C User Functions<br>
; *D User Functions<br>
<br>
<br>
; Mandatory Command Codes<br>
; <a href="http://docs.allstarlink.org/drupal/node/91" rel="noreferrer" target="_blank">http://docs.allstarlink.org/<wbr>drupal/node/91</a><br>
<br>
1 = ilink,1 ; Disconnect specified link<br>
2 = ilink,2 ; Connect specified link -- monitor only<br>
3 = ilink,3 ; Connect specified link -- tranceive<br>
4 = ilink,4 ; Enter command mode on specified link<br>
70 = ilink,5 ; System status<br>
99 = cop,6 ; PTT (phone mode only)<br>
<br>
; End Mandatory Command Codes<br>
<br>
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;<wbr>;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;<wbr>;;<br>
<br>
; Macro Commands<br>
5 = macro<br>
<br>
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;<wbr>;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;<wbr>;<br>
<br>
; Autopatch Commands<br>
; Note, This may be a good place for other 2 digit frequently used commands<br>
<br>
61 = autopatchup,noct = 1,farenddisconnect = 1,dialtime = 20000 ; Autopatch up<br>
62 = autopatchdn ;<br>
Autopatch down<br>
<br>
; autopatchup can optionally take comma delimited setting=value pairs:<br>
<br>
; context = string ; Override default context with "string"<br>
; dialtime = ms ; Specify the max number of milliseconds between phone<br>
number digits (1000 milliseconds = 1 second)<br>
; farenddisconnect = 1 ; Automatically disconnect when called party hangs up<br>
; noct = 1 ; Don't send repeater courtesy tone during autopatch calls<br>
; quiet = 1 ; Don't send dial tone, or connect messages. Do not send<br>
patch down message when called party hangs up<br>
; Example: 123=autopatchup,dialtime=<wbr>20000,noct=1,farenddisconnect=<wbr>1<br>
<br>
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;<wbr>;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;<wbr>;<br>
<br>
; Status Commands<br>
<br>
; 1 - Force ID (global)<br>
; 2 - Give Time of Day (global)<br>
; 3 - Give software Version (global)<br>
; 4 - Give GPS location info<br>
; 5 - Last (dtmf) user<br>
; 11 - Force ID (local only)<br>
; 12 - Give Time of Day (local only)<br>
<br>
721 = status,1 ; Force ID (global)<br>
722 = status,2 ; Give Time of Day (global)<br>
723 = status,3 ; Give software Version (global)<br>
724 = status,4 ; Give GPS location info<br>
725 = status,5 ; Last (dtmf) user<br>
711 = status,11 ; Force ID (local only)<br>
712 = status,12 ; Give Time of Day (local only)<br>
<br>
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;<wbr>;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;<wbr>;;;;;;;;;;;;;;;<br>
<br>
; Link Commands<br>
<br>
; 1 - Disconnect specified link<br>
; 2 - Connect specified link -- monitor only<br>
; 3 - Connect specified link -- tranceive<br>
; 4 - Enter command mode on specified link<br>
; 5 - System status<br>
; 6 - Disconnect all links<br>
; 7 - Last Node to Key Up<br>
; 8 - Connect specified link -- local monitor only<br>
; 9 - Send Text Message (9,<destnodeno or 0 (for all)>,Message Text, etc.<br>
; 10 - Disconnect all RANGER links (except permalinks)<br>
; 11 - Disconnect a previously permanently connected link<br>
; 12 - Permanently connect specified link -- monitor only<br>
; 13 - Permanently connect specified link -- tranceive<br>
; 15 - Full system status (all nodes)<br>
; 16 - Reconnect links disconnected with "disconnect all links"<br>
; 17 - MDC test (for diag purposes)<br>
; 18 - Permanently Connect specified link -- local monitor only<br>
<br>
; ilink commands 1 through 5 are defined in the Mandatory Command section<br>
<br>
806 = ilink,6 ; Disconnect all links<br>
807 = ilink,7 ; Last Node to Key Up<br>
808 = ilink,8 ; Connect specified link -- local monitor only<br>
809 = ilink,9,1999,"Testing" ; would send a text message to node 1999<br>
replace 1999 with 0 for all connected nodes<br>
; *** I'll change this later - just<br>
noticed it ge/omr ***<br>
810 = ilink,10 ; Disconnect all RANGER links (except permalinks)<br>
811 = ilink,11 ; Disconnect a previously permanently connected link<br>
812 = ilink,12 ; Permanently connect specified link -- monitor only<br>
813 = ilink,13 ; Permanently connect specified link -- tranceive<br>
815 = ilink,15 ; Full system status (all nodes)<br>
816 = ilink,16 ; Reconnect links disconnected with<br>
"disconnect all links"<br>
817 = ilink,17 ; MDC test (for diag purposes)<br>
818 = ilink 18 ; Permanently Connect specified link -- local<br>
monitor only<br>
<br>
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;<wbr>;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;<wbr>;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;<wbr>;;;;;;;;;;<br>
<br>
; Control operator (cop) functions. Change these to something other<br>
than these codes listed below!<br>
<br>
901 = cop,1 ; System warm boot<br>
902 = cop,2 ; System enable<br>
903 = cop,3 ; System disable<br>
<br>
904 = cop,4 ; Test tone on/off (toggle)<br>
905 = cop,5 ; Dump system variables on console (debug use only)<br>
<br>
907 = cop,7 ; Time out timer enable<br>
908 = cop,8 ; Time out timer disable<br>
<br>
909 = cop,9 ; Autopatch enable<br>
910 = cop,10 ; Autopatch disable<br>
<br>
911 = cop,11 ; User linking functions enable<br>
912 = cop,12 ; User linking functions disable<br>
<br>
913 = cop,13 ; Query system control state<br>
914 = cop,14 ; Set system control state<br>
<br>
915 = cop,15 ; Scheduler enable<br>
916 = cop,16 ; Scheduler disable<br>
<br>
917 = cop,17 ; User functions enable (time, id, etc)<br>
918 = cop,18 ; User functions disable<br>
<br>
919 = cop,19 ; Select alternate hang time (althangtime)<br>
920 = cop,20 ; Select standard hangtime (hangtime)<br>
<br>
921 = cop,21 ; Enable Parrot Mode<br>
922 = cop,22 ; Disable Parrot Mode<br>
923 = cop,23 ; Birdbath (Current Parrot Cleanup/Flush)<br>
<br>
924 = cop,24 ; Flush all telemetry<br>
925 = cop,25 ; Query last node un-keyed<br>
926 = cop,26 ; Query all nodes keyed/unkeyed<br>
930 = cop,30 ; Recall Memory Setting in Attached Xcvr<br>
<br>
931 = cop,31 ; Channel Selector for Parallel Programmed Xcvr<br>
<br>
932 = cop,32 ; Touchtone pad test: command + Digit string + # to<br>
playback all digits pressed<br>
<br>
933 = cop,33 ; Local Telemetry Output Enable<br>
934 = cop,34 ; Local Telemetry Output Disable<br>
935 = cop,35 ; Local Telemetry Output on Demand<br>
<br>
936 = cop,36 ; Foreign Link Local Output Path Enable<br>
937 = cop,37 ; Foreign Link Local Output Path Disable<br>
938 = cop,38 ; Foreign Link Local Output Path Follows Local Telemetry<br>
939 = cop,39 ; Foreign Link Local Output Path on Demand<br>
<br>
942 = cop,42 ; Echolink announce node # only<br>
943 = cop,43 ; Echolink announce node Callsign only<br>
944 = cop,44 ; Echolink announce node # & Callsign<br>
<br>
945 = cop,45 ; Link Activity timer enable<br>
945 = cop,46 ; Link Activity timer disable<br>
947 = cop,47 ; Reset "Link Config Changed" Flag<br>
<br>
948 = cop,48 ; Send Page Tone (Tone specs separated by parenthesis)<br>
<br>
949 = cop,49 ; Disable incoming connections (control state noice)<br>
950 = cop,50 ; Enable incoming connections (control state noicd)<br>
<br>
951 = cop,51 ; Enable sleep mode<br>
952 = cop,52 ; Disable sleep mode<br>
953 = cop,53 ; Wake up from sleep<br>
954 = cop,54 ; Go to sleep<br>
955 = cop,55 ; Parrot Once if parrot mode is disabled<br>
<br>
956 = cop,56 ; Rx CTCSS Enable<br>
957 = cop,57 ; Rx CTCSS Disable<br>
<br>
958 = cop.58 ; Tx CTCSS On Input only Enable<br>
959 = cop,59 ; Tx CTCSS On Input only Disable<br>
<br>
960 = cop,60 ; Send MDC-1200 Burst<br>
(cop,60,type,UnitID[,DestID,<wbr>SubCode])<br>
; Type is 'I' for PttID, 'E'<br>
for Emergency, and 'C' for Call<br>
; (SelCall or Alert), or 'SX'<br>
for STS (ststus), where X is 0-F.<br>
; DestID and subcode are only<br>
specified for the 'C' type message.<br>
; UnitID is the local systems<br>
UnitID. DestID is the MDC1200 ID of<br>
; the radio being called, and<br>
the subcodes are as follows:<br>
; Subcode '8205' is Voice<br>
Selective Call for Spectra ('Call')<br>
; Subcode '8015' is Voice<br>
Selective Call for Maxtrac ('SC') or<br>
; Astro-Saber('Call')<br>
; Subcode '810D' is Call Alert<br>
(like Maxtrac 'CA')<br>
<br>
961 = cop,61 ; Send Message to USB to<br>
control GPIO pins (cop,61,GPIO1=0[,GPIO4=1].....<wbr>)<br>
962 = cop,62 ; Send Message to USB to<br>
control GPIO pins, quietly (cop,62,GPIO1=0[,GPIO4=1].....<wbr>)<br>
<br>
963 = cop,63 ; Send pre-configred APRSTT<br>
notification (cop,63,CALL[,OVERLAYCHR])<br>
964 = cop,64 ; Send pre-configred APRSTT<br>
notification, quietly (cop,64,CALL[,OVERLAYCHR])<br>
965 = cop,65 ; Send POCSAG page (equipped<br>
channel types only)<br>
<br>
982 = playback,rpt/node_enabled ; Report node enabled to transmitter<br>
<br>
[functions-remote]<br>
<br>
0 = remote,1 ; Retrieve Memory<br>
1 = remote,2 ; Set freq.<br>
2 = remote,3 ; Set tx PL tone<br>
3 = remote,4 ; Set rx PL tone<br>
40 = remote,100 ; Rx PL off<br>
41 = remote,101 ; Rx PL on<br>
42 = remote,102 ; Tx PL off<br>
43 = remote,103 ; Tx PL on<br>
44 = remote,104 ; Low Power<br>
45 = remote,105 ; Medium Power<br>
46 = remote,106 ; High Power<br>
711 = remote,107 ; Bump -20<br>
714 = remote,108 ; Bump -100<br>
717 = remote,109 ; Bump -500<br>
713 = remote,110 ; Bump +20<br>
716 = remote,111 ; Bump +100<br>
719 = remote,112 ; Bump +500<br>
721 = remote,113 ; Scan - slow<br>
724 = remote,114 ; Scan - quick<br>
727 = remote,115 ; Scan - fast<br>
723 = remote,116 ; Scan + slow<br>
726 = remote,117 ; Scan + quick<br>
729 = remote,118 ; Scan + fast<br>
79 = remote,119 ; Tune<br>
51 = remote,5 ; Long status query<br>
52 = remote,140 ; Short status query<br>
67 = remote,210 ; Send a *<br>
69 = remote,211 ; Send a #<br>
;91 = remote,99,CALLSIGN,LICENSETAG ; Remote base login.<br>
; Define a different dtmf<br>
sequence for each user which is<br>
; authorized to use the remote<br>
base to control access to it.<br>
; For examble<br>
9139583=remote,99,WB6NIL,G would grant access to<br>
; the remote base and announce<br>
WB6NIL as being logged in.<br>
; Another entry,<br>
9148351=remote,99,WA6ZFT,E would grant access to<br>
; the remote base and announce<br>
WA6ZFT as being logged in.<br>
; When the remote base is<br>
disconnected from the originating node, the<br>
; user will be logged out. The<br>
LICENSETAG argument is used to enforce<br>
; tx frequency limits. See [txlimits] below.<br>
85 = cop,6 ; Remote base telephone key<br>
<br>
<br>
[telemetry]<br>
<br>
; Telemetry entries can be shared across all repeaters, or defined for<br>
each repeater.<br>
; Can be a tone sequence, morse string, or a file<br>
;<br>
; |t - Tone escape sequence<br>
;<br>
; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2,<br>
duration, amplitude)<br>
; Single frequencies are created by setting freq1 or freq2 to zero.<br>
;<br>
; |m - Morse escape sequence<br>
;<br>
; Sends Morse code at the telemetry amplitude and telemetry frequency<br>
as defined in the<br>
; [morse] section.<br>
;<br>
; Follow with an alphanumeric string<br>
;<br>
; |i - Morse ID escape sequence<br>
;<br>
; Sends Morse code at the ID amplitude and ID frequency as defined in the<br>
; [morse] section.<br>
;<br>
<br>
ct1 = |t(350,0,100,2048)(500,0,100,<wbr>2048)(660,0,100,2048)<br>
ct2 = |t(660,880,150,2048)<br>
ct3 = |t(440,0,150,4096)<br>
ct4 = |t(550,0,150,2048)<br>
ct5 = |t(660,0,150,2048)<br>
ct6 = |t(880,0,150,2048)<br>
ct7 = |t(660,440,150,2048)<br>
ct8 = |t(700,1100,150,2048)<br>
ranger = |t(1800,0,60,3072)(0,0,50,0)(<wbr>1800,0,60,3072)(0,0,50,0)(<wbr>1800,0,60,3072)(0,0,50,0)(<wbr>1800,0,60,3072)(0,0,50,0)(<wbr>1800,0,60,3072)(0,0,50,0)(<wbr>1800,0,60,3072)(0,0,150,0)<br>
remotemon = |t(1209,0,50,2048) ;<br>
local courtesy tone when receive only<br>
remotetx = |t(1633,0,50,3000)(0,0,80,0)(<wbr>1209,0,50,3000) ; local<br>
courtesy tone when linked Trancieve mode<br>
cmdmode = |t(900,903,200,2048)<br>
functcomplete = |t(1000,0,100,2048)(0,0,100,0)<wbr>(1000,0,100,2048)<br>
remcomplete = |t(650,0,100,2048)(0,0,100,0)(<wbr>650,0,100,2048)(0,0,100,0)(<wbr>650,0,100,2048)<br>
pfxtone = |t(350,440,30000,3072)<br>
patchup = rpt/callproceeding<br>
patchdown = rpt/callterminated<br>
<br>
; As far as what the numbers mean,<br>
; (000,000,010,000)<br>
; | | | |-------amplitude<br>
; | | |-------------duration<br>
; | |-------------------Tone 2<br>
; |-------------------------Tone 1<br>
<br>
; So, with 0,0,10,0 That says No Tone1, No Tone2, 10ms duration, 0 Amplitude.<br>
; Use it for a delay. Fine tuning for how long before telemetry is<br>
sent, in conjunction with the telemdelay parameter)<br>
; The numbers, like 350,440,10,2048 are 350Hz, 440Hz, 10ms delay,<br>
amplitude of 2048.<br>
<br>
; Morse code parameters, these are common to all repeaters.<br>
<br>
[morse]<br>
speed = 20 ; Approximate speed in WPM<br>
frequency = 800 ; Morse Telemetry Frequency<br>
amplitude = 4096 ; Morse Telemetry Amplitude<br>
idfrequency = 1065 ; Morse ID Frequency<br>
idamplitude = 1024 ; Morse ID Amplitude<br>
<br>
;<br>
; This section allows wait times for telemetry events to be adjusted<br>
; A section for wait times can be defined for every repeater<br>
;<br>
<br>
[wait-times]<br>
telemwait = 1000 ; Time to wait before sending<br>
most telemetry<br>
idwait = 500 ; Time to wait before starting ID<br>
unkeywait = 500 ; Time to wait after unkey<br>
before sending CT's and link telemetry<br>
calltermwait = 500 ; Time to wait before<br>
announcing "call terminated"<br>
<br>
;<br>
; This is where you define your nodes which cam be connected to.<br>
;<br>
<br>
[nodes]<br>
; Note, if you are using automatic update for allstar link nodes,<br>
; no allstar link nodes should be defined here. Only place a definition<br>
; for your local nodes, and private (off of allstar link) nodes here.<br>
<br>
29655 = <a href="http://radio@127.0.0.1:4569/29655,NONE" rel="noreferrer" target="_blank">radio@127.0.0.1:4569/29655,<wbr>NONE</a> ; This must be changed to your<br>
node number<br>
; and iax port number if not the default<br>
; Memories for remote bases<br>
<br>
[memory]<br>
;00 = 146.580,100.0,m<br>
;01 = 147.030,103.5,m+t<br>
;02 = 147.240,103.5,m+t<br>
;03 = 147.765,79.7,m-t<br>
;04 = 146.460,100.0,m<br>
;05 = 146.550,100.0,m<br>
<br>
; Place command macros here<br>
<br>
[macro]<br>
;1 = *32011#<br>
;2 = *12001*12011*12043*12040*<wbr>12050*12060*12009*12002*12003*<wbr>12004*1113*12030#<br>
;3 = *32001*32011*32050*32030*<wbr>32060#<br>
<br>
<br>
; Data Acquisition configuration<br>
<br>
;[daq-list]<br>
;device = device_name1<br>
;device = device_name2<br>
<br>
;Where: device_name1 and device_name2 are stanzas you define in this file<br>
<br>
;device = daq-cham-1<br>
<br>
; Device name<br>
<br>
;[daq-cham-1] ; Defined in [daq-list]<br>
;hwtype = uchameleon ; DAQ hardware type<br>
;devnode = /dev/ttyUSB0 ; DAQ device node (if required)<br>
;1 = inadc ; Pin definition for an ADC channel<br>
;2 = inadc<br>
;3 = inadc<br>
;4 = inadc<br>
;5 = inadc<br>
;6 = inadc<br>
;7 = inadc<br>
;8 = inadc<br>
;9 = inp ; Pin definition for an input with a weak pullup resistor<br>
;10 = inp<br>
;11 = inp<br>
;12 = inp<br>
;13 = in ; Pin definition for an input without a weak pullup resistor<br>
;14 = out ; Pin definition for an output<br>
;15 = out<br>
;16 = out<br>
;17 = out<br>
;18 = out<br>
<br>
;[meter-faces]<br>
<br>
;face = scale(scalepre,scalediv,<wbr>scalepost),word/?,...<br>
;<br>
; scalepre = offset to add before dividing with scalediv<br>
; scalediv = full scale/number of whole units (e.g. 256/20 or 12.8 for<br>
20 volts).<br>
; scalepost = offset to add after dividing with scalediv<br>
;<br>
;face = range(X-Y:word,X2-Y2:word,...)<wbr>,word/?,...<br>
;face = bit(low-word,high-word),word/?<wbr>,...<br>
;<br>
; word/? is either a word in /var/lib/asterisk/sounds or one of its<br>
subdirectories,<br>
; or a question mark which is a placeholder for the measured value.<br>
;<br>
;<br>
; Battery voltage 0-20 volts<br>
;batvolts = scale(0,12.8,0),rpt/<wbr>thevoltageis,?,ha/volts<br>
; 4 quadrant wind direction<br>
;winddir = range(0-33:north,34-96:west,<wbr>97-160:south,161-224:east,225-<wbr>255:north),rpt/thewindis,?<br>
; LM34 temperature sensor with 130 deg. F full scale<br>
;lm34f = scale(0,1.969,0),rpt/<wbr>thetemperatureis,?,degrees,<wbr>fahrenheit<br>
; Status poll (non alarmed)<br>
;light = bit(ha/off,ha/on),ha/light,?<br>
<br>
;[alarms]<br>
;<br>
;tag = device,pin,node,ignorefirst,<wbr>func-low,func-hi<br>
;<br>
;tag = a unique name for the alarm<br>
;device = daq device to poll<br>
;pin = the device pin to be monitored<br>
;ignorefirstalarm = set to 1 to throwaway first alarm event, or 0 to report it<br>
;node = the node number to execute the function on<br>
;func-low = the DTMF function to execute on a high to low transition<br>
;func-high = the DTMF function to execute on a low to high transition<br>
;<br>
; a '-' as a function name is shorthand for no-operation<br>
;<br>
;door = daq-cham-1,9,1,2017,*7,-<br>
;pwrfail = daq-cham-1,10,0,2017,*911111,-<br>
;<br>
; Control states<br>
; Allow several control operator functions to be changed at once using<br>
one command (good for scheduling)<br>
;<br>
;[controlstates]<br>
;statenum = copcmd,[copcmd]...<br>
;0 = rptena,lnkena,apena,totena,<wbr>ufena,noicd ; Normal operation<br>
;1 = rptena,lnkena,apdis,totdis,<wbr>ufena,noice ; Net and news operation<br>
;2 = rptena,lnkdis,apdis,totena,<wbr>ufdis,noice ; Repeater only operation<br>
<br>
; Scheduler - execute a macro at a given time<br>
<br>
[schedule]<br>
;dtmf_function = m h dom mon dow ; ala cron, star is implied<br>
;2 = 00 00 * * * ; at midnight, execute macro 2.<br>
<br>
==============================<wbr>================<br>
<br>
echolink.conf (not that I think -this- part matters much)<br>
<br>
[el0]<br>
call = W5OMR/R ; Change this!<br>
pwd = xxxxx ; Change this!<br>
name = Geoff ; Change this!<br>
qth = Splendora ; Change this!<br>
email = INVALID ; Change this!<br>
node = 004817 ; Change this!<br>
; Data for EchoLink Status Page<br>
lat = 0.0 ; Latitude in decimal degrees<br>
lon = 0.0 ; Longitude in decimal degrees<br>
freq = 0.0 ; not mandatory Frequency in MHz<br>
tone = 0.0 ; not mandatory CTCSS Tone (0 for none)<br>
power = 5 ; 0=0W, 1=1W, 2=4W, 3=9W, 4=16W, 5=25W, 6=36W, 7=49W, 8=64W,<br>
9=81W (Power in Watts)<br>
height = 2 ; 0=10 1=20 2=40 3=80 4=160 5=320 6=640 7=1280 8=2560<br>
9=5120 (AMSL in Feet)<br>
gain = 9 ; Gain in db (0-9)<br>
dir = 0 ; 0=omni 1=45deg 2=90deg 3=135deg 4=180deg 5=225deg 6=270deg<br>
7=315deg 8=360deg (Direction)<br>
<br>
maxstns = 5 ; Max Stations<br>
<br>
rtcptimeout = 10<br>
recfile = /tmp/echolink_recorded.gsm ;<br>
astnode = 29655 ; Change this!<br>
context = radio-secure ; Default in code is echolink-in<br>
<br>
; Max 3 servers<br>
server1 = <a href="http://nasouth.echolink.org" rel="noreferrer" target="_blank">nasouth.echolink.org</a><br>
server2 = <a href="http://naeast.echolink.org" rel="noreferrer" target="_blank">naeast.echolink.org</a><br>
server3 = <a href="http://server3.echolink.org" rel="noreferrer" target="_blank">server3.echolink.org</a><br>
<br>
; To deny w6xxx you would add the statement: deny = w6xxx<br>
; To prohibit computer-based connections you would write: permit = *-*<br>
; To allow access to only a select group of callsigns: permit = w6abc,w6def,...<br>
<br>
; permit ; comma delimited list of callsign, type (-r)<br>
; deny<br>
<br>
<br>
; Remote text commands thru netcat:<br>
; o.conip <IPaddress> (request a connect)<br>
; o.dconip <IPaddress> (request a disconnect)<br>
; o.rec (turn on/off recording)<br>
<br>
; ipaddr<br>
; port<br>
<br>
==============================<wbr>=<br>
<br>
So, does anything 'jump out' at ya?<br>
<span class="HOEnZb"><font color="#888888"><br>
<br>
--<br>
<br>
73 = Best Regards,<br>
-Geoff/W5OMR<br>
______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </font></span></blockquote></div><br></div>