<div dir="ltr"><div class="gmail_default" style="font-size:small">I am looking for any guidance on interfacing an RTCM to a TKR-750.  In particular:</div><div class="gmail_default" style="font-size:small">1) should I use TA or TD for feeding in the transmit audio (I am using TD)</div><div class="gmail_default" style="font-size:small">2) how should I configure the channel ('duplex'?)</div><div class="gmail_default" style="font-size:small">3) what about other settings like PTT priority (currently local mic, external ptt, repeat ptt)</div><div class="gmail_default" style="font-size:small"><br></div><div class="gmail_default" style="font-size:small">I initially used channel mode 'repeat' which is not right because then you get local repeat mixed with the transmit audio coming from the RTCM (slightly delayed).  I switched to duplex mode and now I am PTT but transmit audio.</div><div class="gmail_default" style="font-size:small"><br></div><div class="gmail_default" style="font-size:small">Form my contribution, I can offer a solution to the level problem interfacing the CTCSS decode (TOR) to the CTCSS line on the RTCM.</div><div class="gmail_default" style="font-size:small">I used an NPN transistor and a voltage divider (15k, 5k) to ground fed by the TOR (active high) from the Kenwood.  This works nicely.</div><div class="gmail_default" style="font-size:small"><br></div><div class="gmail_default" style="font-size:small">-Doug-</div><div class="gmail_default" style="font-size:small">KD7DK</div></div>