<div dir="auto">I have been battling a similar issue with 3 RTCM units in mixed mode, not voted, miles apart on different frequencies. <div dir="auto"><br></div><div dir="auto">It's not a sound card issue. The sound card doesn't come into play on a voted system.</div><div dir="auto"><br></div><div dir="auto">What seemed to fix mine, was to move the buflen command into the node stanza in voter.conf. I haven't confirmed it yet but it seems to be the case. </div><div dir="auto"><br></div><div dir="auto">Not even sure if that is even an issue on voted systems but I thought I'd put in my whole two cents.</div><div dir="auto"><br></div><div dir="auto">Sam</div><div dir="auto">k8sn</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Feb 22, 2018 09:43, "ARS W5OMR" <<a href="mailto:ars.w5omr@gmail.com">ars.w5omr@gmail.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="auto">That's probably a latency in the audio section of the PC being used.<div dir="auto"><br></div><div dir="auto">A buddy had the same issues while operating his HF station, remote. After a few minutes, the latency grew and grew.... He used WWV (he lives in West Central OK) as a time base... </div><div dir="auto"><br></div><div dir="auto">His solution was to get a more "robust" (read: Turtle Beach) sound card. This was in his desktop at the house.</div><div dir="auto"><br></div><div dir="auto">It might not be a software problem, as much as a Hardware issue.</div><div dir="auto"><br></div><div dir="auto">I don't remember if you said this was on an RTCM or not but I know one is involved.</div><div dir="auto"><br></div><div dir="auto">I believe I would check more on all audio devices involved.</div><div dir="auto"><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Feb 22, 2018 12:11 AM, "Hayden Honeywood" <<a href="mailto:haydenph91@gmail.com" target="_blank">haydenph91@gmail.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div class="gmail_extra">I've made a YouTube video with clips from a single conversation I had this morning on the repeater. The audio was recorded on my dashcam.</div><div class="gmail_extra"><br></div><div class="gmail_extra">As can be heard in the video, when I start the conversation, the audio delay is nil, or very little when unkeying. However, by the time I'm finished (I think the conversation lasted about 20 minutes) the audio delay is out to 4 or 5 words!</div><div class="gmail_extra"><br></div><div class="gmail_extra">We were both using the same repeater. We have a repeater linked in from another location. I've noticed when talking to someone via that method, the audio delay issue does not build up so quickly.</div><div class="gmail_extra"><br></div><div class="gmail_extra">Hopefully this explains a bit better the issue I'm having.</div><div class="gmail_extra"><br></div><div class="gmail_extra"><a href="https://youtu.be/KG3GgaHVWbI" target="_blank">https://youtu.be/KG3GgaHVWbI</a><br></div><div class="gmail_extra"><br></div><div class="gmail_extra">Regards</div><div class="gmail_extra">Hayden VK7HH</div></div>
<br>______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.allstarlin<wbr>k.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/c<wbr>gi-bin/mailman/listinfo/app_rp<wbr>t-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/c<wbr>gi-bin/mailman/listinfo/app_rp<wbr>t-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></blockquote></div></div>
<br>______________________________<wbr>_________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.<wbr>allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/<wbr>cgi-bin/mailman/listinfo/app_<wbr>rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br></blockquote></div></div>