<div dir="ltr">Hi Kevin,<div>Sorry keep getting confused... the VOTER (thru-hole) board lets you do a Diode calibration. I think the RTCM has the same functionality... it's documented in the manual, but not detailed. It has the switch for it anyway...</div><div><br></div><div>OK on the baud rate and the messages you have in debug. </div><div>I'm pretty sure the time on the RTCM's references the master timing source - which has the app_rpt host connected on the same network. Have you checked that your host has the correct time.</div><div><br></div><div>The only time I saw the GPS Data Time period elasped error was running 4800 baud on the Garmin puck receivers. I changed this to 9600 which fixed the issue.</div><div><br></div><div>Hayden</div></div>