<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto">Please check out <a href="https://wiki.allstarlink.org/wiki/Main_Page">https://wiki.allstarlink.org/wiki/Main_Page</a><a href="https://wiki.allstarlink.org/wiki/Main_Page">https://wiki.allstarlink.org/wiki/Main_Page</a> which contains lots of good info. Here are a few things to be aware of.<div><br><div>Before attempting to connect (link) any device to the node, set the node up first, so you have an operating node, which means Asterisk is happy.</div><div><br></div><div>The node is controlled (read that as setup) by configuring it, changing the *.config files in /etc/asterisk </div><div><br></div><div>If using a DMK Engineering URI or URIx (or similar device), the green light continually blinks when Asterisk is running and happy. If the green light is solid, not blinking, Asterisk is not happy, and likely not running. It may be happy, but the node not fully setup.</div><div><br></div><div>Each time a change is made to one of the config files, asterisk must be restarted for the changes to be effective. If you make a change and restart asterisk, and the green light no longer blinks, reverse your change and figure out what you may have done incorrectly.<br><br>Most of all, take time to learn and enjoy the asterisk experience.</div><div><br><div id="AppleMailSignature"><div>Thanks,</div><div>Bob</div><div>K6ECM</div><div>73</div><div><br></div></div><div><br>On Jun 29, 2018, at 3:58 AM, <a href="mailto:mwbesemer@cox.net">mwbesemer@cox.net</a> wrote:<br><br></div><blockquote type="cite"><div><span>No. I've never seen reference to that. I'm still in the initial phase of setting up this node; have not messed with rpt.conf yet.</span><br><span></span><br><span>Mike</span><br><span>WM4B</span><br><span></span><br><span></span><br><span>On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote:</span><br><span></span><br><blockquote type="cite"><span>Did you add your local node address for each node in the rpt,conf [nodes] stanza?</span><br></blockquote><blockquote type="cite"><span>Thanks,</span><br></blockquote><blockquote type="cite"><span>Bob</span><br></blockquote><blockquote type="cite"><span>K6ECM</span><br></blockquote><blockquote type="cite"><span>73</span><br></blockquote><blockquote type="cite"><span></span><br></blockquote><blockquote type="cite"><span></span><br></blockquote><blockquote type="cite"><blockquote type="cite"><span>On Jun 28, 2018, at 6:12 PM, Mike <<a href="mailto:mm@midnighteng.com">mm@midnighteng.com</a>> wrote:</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>Mike,</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>Still a lot of possibilities of things that may not be right but,</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>Just so that you are conducting a 'good test' behind your nat through wifi,</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>put your phone in airplane mode, then turn just the wifi on and connect.</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>You might also want to turn the forwarding to just the UDP 4569 and specify that in your phone connect,</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>guessing your using the android iaxrpt.... like this for your IP...</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>192.169.1.101:4569 < :port especially if not the norm, but do it anyway.</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>That's a few things to investigate anyway,</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>Let me know if your still having issues.</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>Oh... don't forget to get back out of airplane mode / turn cellular back on when done.</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>Hate to see ya late for dinner ...lol</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>...mike/kb8jnm</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span>On 6/28/2018 8:00 PM, Mike Besemer wrote:</span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span>Making progress on my node. After several false starts I finally got the node connected and am able to connect via iaxrpt from my Android devices if I use my EXTERNAL IP address.</span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span>I cannot connect from Android or Windows using my INTERAL IP address. I followed the guide at <a href="http://hamvoip.com">hamvoip.com</a> and have double checked everything.</span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span>The port is open for both UDP and TCP connections. The firewall seems ok.</span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span>It has to be something obvious. What did I miss?</span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span>Mike</span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span>WM4B</span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span>_______________________________________________</span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span>App_rpt-users mailing list</span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span><a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.allstarlink.org</a></span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span><a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span>To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"</span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><blockquote type="cite"><span>You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.</span><br></blockquote></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>_______________________________________________</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>App_rpt-users mailing list</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span><a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.allstarlink.org</a></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span><a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span></span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"</span><br></blockquote></blockquote><blockquote type="cite"><blockquote type="cite"><span>You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.</span><br></blockquote></blockquote><blockquote type="cite"><span></span><br></blockquote><blockquote type="cite"><span></span><br></blockquote><blockquote type="cite"><span> ------------------------------</span><br></blockquote><blockquote type="cite"><span></span><br></blockquote><blockquote type="cite"><span>_______________________________________________</span><br></blockquote><blockquote type="cite"><span>App_rpt-users mailing list</span><br></blockquote><blockquote type="cite"><span><a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.allstarlink.org</a></span><br></blockquote><blockquote type="cite"><span><a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br></blockquote><blockquote type="cite"><span></span><br></blockquote><blockquote type="cite"><span>To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"</span><br></blockquote><blockquote type="cite"><span>You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.</span><br></blockquote><span>_______________________________________________</span><br><span>App_rpt-users mailing list</span><br><span><a href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.allstarlink.org</a></span><br><span><a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br><span></span><br><span>To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"</span><br><span>You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </span></div></blockquote></div></div></body></html>